Unimat SL spares

User avatar
Lord Colnago
Posts: 403
Joined: Tue Aug 11, 2009 8:42 pm

Unimat SL spares

Postby Lord Colnago » Tue Nov 03, 2020 7:26 pm

Does anyone know of a source of spares for the Unimat SL? I am looking for new motor bushes and drive belts.

Thanks in advance.

John.
The second best priest

Jeremy Suter
Posts: 359
Joined: Tue Apr 14, 2009 6:56 pm

Re: Unimat SL spares

Postby Jeremy Suter » Tue Nov 03, 2020 9:53 pm

Hi John
Not sure if Emco are still going but spares do come up on Ebay or you could try Pantograph services

http://www.pantograph.co.uk/

The do supply spare brushes for my pantograph milling machine which has a similar motor to the Unimat and the defiantly sell Bushes as i have bought some a few year ago. anyway worth try anyway
Last edited by Jeremy Suter on Wed Nov 04, 2020 8:14 am, edited 1 time in total.
Tips and tricks in machine tool practice viewtopic.php?f=132&t=6350

martin goodall
Posts: 1425
Joined: Fri Oct 02, 2009 6:20 pm

Re: Unimat SL spares

Postby martin goodall » Tue Nov 03, 2020 10:44 pm

I was under the impression that compatible drive belts can still be obtained from other sources.

In the past, I have purchased spare [not EMCO] belts for my Unimat 3, but unfortunately I can't remember who supplied them.

(Sorry about that. Not very helpful, but at least it indicates that spare belts should be obtainable, but I don't know whether other [alternative] spares are also available, other than second-hand.)

Philip Hall
Posts: 1947
Joined: Mon Aug 10, 2009 7:49 pm

Re: Unimat SL spares

Postby Philip Hall » Tue Nov 03, 2020 11:59 pm

I have used Pro Machine Tools several times in the past.

https://www.emcomachinetools.co.uk/inde ... 0SL%20belt

My only observation is that the SL belts come in two sizes, whereas actually there are three if the machine has a slow speed attachment, which mine does. In practice the two sizes work - the large ones go on forever despite lots of cracks, but the small ones break. Good news is that I glue them back together again with Hafixs superglue and they last a few more jobs. I can go on like this for quite a while before having to admit defeat and replace the belt!

Can’t help with motor bushes I’m afraid. You do mean bushes and not brushes? I was having a conversation with a friend today and he mentioned knowing someone who had had a motor for a Unimat 3 rebuilt recently. I could find out more if you wish.

Philip

User avatar
Lord Colnago
Posts: 403
Joined: Tue Aug 11, 2009 8:42 pm

Re: Unimat SL spares

Postby Lord Colnago » Wed Nov 04, 2020 12:15 am

Thanks Phillip,

I did mean brushes not brushes. Thanks for pointing that out. I do have a "three belt" machine, although, for the most part, I only use two but there's always the odd occasion when the third belt comes into play Thanks also to Jeremy and Martin. I'll do some checking tomorrow but am always open to further suggestions.

John
The second best priest

andrewnummelin
Posts: 374
Joined: Mon Jul 21, 2008 9:43 am

Re: Unimat SL spares

Postby andrewnummelin » Wed Nov 04, 2020 7:40 am

Many moons ago I was after belts for a Unimat 3 and was informed that they were just standard sized “O” rings and hence easy to source. I suspect the same may be true for the SL.
Regards,

Andrew Nummelin


Alan Turner
Posts: 643
Joined: Sun Jul 20, 2008 4:24 pm

Re: Unimat SL spares

Postby Alan Turner » Wed Nov 04, 2020 11:00 am

I use Polyurathane belting which is simply joined together with a hot blade.

See here for a source: https://uk.rs-online.com/web/c/pneumati ... ane-belts/

See here for joining technique: https://www.youtube.com/watch?v=za0taS7rIWY

regards

Alan

User avatar
Lord Colnago
Posts: 403
Joined: Tue Aug 11, 2009 8:42 pm

Re: Unimat SL spares

Postby Lord Colnago » Wed Nov 04, 2020 12:52 pm

Thanks Keith and Alan, all ordered now.

John.
The second best priest

User avatar
Tim V
Posts: 2868
Joined: Tue Jul 29, 2008 4:40 pm

Re: Unimat SL spares

Postby Tim V » Wed Nov 04, 2020 2:48 pm

If you have the quick change tool post I have some spare tool holders.
Tim V
(Not all railways in Somerset went to Dorset)

User avatar
Lord Colnago
Posts: 403
Joined: Tue Aug 11, 2009 8:42 pm

Re: Unimat SL spares

Postby Lord Colnago » Wed Nov 04, 2020 5:28 pm

That's very good of you Tim. Sadly, I have the one that just holds a single tool.

John.
The second best priest

Enigma
Posts: 533
Joined: Tue Aug 13, 2013 2:49 pm

Re: Unimat SL spares

Postby Enigma » Thu Nov 05, 2020 12:28 pm

I've bought the round 'meltable' belting from here -

http://www.lathes.co.uk/

Been in use on my Cowells for several years now. Easy to shorten as well if needed. All you need is a sharp knife to cut it to length and a flat 'butter knife' style flat surface heated in a gas ring or similar to melt the ends before pressing them together.


Return to “Lathe Work”

Who is online

Users browsing this forum: No registered users and 0 guests