Track for battery/radio control?

Discuss the prototype and how to model it.
User avatar
jim s-w
Posts: 1746
Joined: Wed Jul 30, 2008 5:56 pm

Re: Track for battery/radio control?

Postby jim s-w » Sun Feb 02, 2020 6:31 pm

My only real question is how strong would it be if a loco slips while trying to pull away. Would you get grooves like the real thing can in extreme circumstances?

User avatar
Rod Cameron
Posts: 667
Joined: Fri Jul 25, 2008 12:01 pm

Re: Track for battery/radio control?

Postby Rod Cameron » Sun Feb 02, 2020 6:58 pm

I've recently been building some very nice French laser-cut building kits. In one of them, everything was laser-cut - including things with cylindrical sections like drain pipes, which just proved to me that just because a certain technology allows you to try to do something, it doesn't follow that it should. Same thing with 3D-printing, which can we're told be made to make almost anything, but that doesn't mean it's the best solution. IMO rail is one of those things where it isn't. Experience will in time allow this all to settle down ...
Rod

User avatar
Martin Wynne
Posts: 845
Joined: Mon May 14, 2012 4:27 pm

Re: Track for battery/radio control?

Postby Martin Wynne » Sun Feb 02, 2020 7:22 pm

Rod Cameron wrote:Same thing with 3D-printing, which can we're told be made to make almost anything, but that doesn't mean it's the best solution. IMO rail is one of those things where it isn't.

Hi Rod,

Whether it's the best solution doesn't really come into it. Almost certainly it isn't.

The question is, is it a feasible way for someone who hates track-building to get say, a curved outside-slip in 5.5mm/ft scale for Irish 5ft-3in gauge?

cheers,

Martin.
40 years developing Templot. And counting ...

User avatar
Martin Wynne
Posts: 845
Joined: Mon May 14, 2012 4:27 pm

Re: Track for battery/radio control?

Postby Martin Wynne » Wed Feb 12, 2020 12:04 am

Thanks to those who expressed an interest in this. I can report some progress -- plastic rail: Image

Image

Quite a long way from a proper BS-95R section, but probably as close as is feasible on home filament printers. It looks better at normal viewing distance than this cruel close-up.

Image

More info on all this at:

http://85a.co.uk/forum/view_topic.php?i ... 012#p29012

cheers,

Martin.
40 years developing Templot. And counting ...


Return to “Track and Turnouts”

Who is online

Users browsing this forum: Philip Hall and 4 guests