Beer and Buckjumpers

User avatar
Will L
Posts: 1801
Joined: Sun Jul 20, 2008 3:54 pm

Re: Sigh...

Postby Will L » Sun Dec 21, 2014 7:02 pm

Flymo748 wrote:...then it wouldn't be the case that when I picked the first one up and turned it the right way up, the coupling fell off in a sticky mess!


Fortunately unset araldite washes off in detergent and water.

User avatar
Flymo748
Posts: 2356
Joined: Sun Jul 20, 2008 6:00 pm

Re: Sigh...

Postby Flymo748 » Sun Dec 21, 2014 8:44 pm

Will L wrote:
Flymo748 wrote:...then it wouldn't be the case that when I picked the first one up and turned it the right way up, the coupling fell off in a sticky mess!


Fortunately unset araldite washes off in detergent and water.


I shall be using a number of cotton buds and tissues... As the rest of the wagons are painted and mostly weathered, immersion is not really an option.

Wish me luck!
Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk

User avatar
Mark Tatlow
Posts: 753
Joined: Tue Dec 02, 2008 11:24 pm

Re: Sigh...

Postby Mark Tatlow » Tue Dec 23, 2014 10:04 am

Flymo748 wrote:I can be so stupid at times.
Flymo


I beleive this has been mentioned; most Missendens for example!

Just booked by the way; but will be staying up the road as I failed ot heed David's warning that the last few places in the Abbey were about to go! So perhaps this makes me a tad stupid too!
Mark Tatlow

User avatar
David B
Posts: 1204
Joined: Sun Jul 20, 2008 5:30 pm

Re: Sigh...

Postby David B » Tue Dec 23, 2014 10:15 am

Mark Tatlow wrote:
Flymo748 wrote:I can be so stupid at times.
Flymo


I beleive this has been mentioned; most Missendens for example!

Just booked by the way; but will be staying up the road as I failed ot heed David's warning that the last few places in the Abbey were about to go! So perhaps this makes me a tad stupid too!


Ouch!! I can see we are going to have an interesting Weekend in March.

Incidentally, for anyone else thinking of coming, there are places in the various groups but accommodation is bed and breakfast (all the Abbey bedrooms having been booked long ago) and with two whole months still to go, Mark is the 61st person to have booked. (Details: Missenden Railway Modellers' Weekends)

User avatar
Flymo748
Posts: 2356
Joined: Sun Jul 20, 2008 6:00 pm

Re: Sigh...

Postby Flymo748 » Tue Dec 23, 2014 12:50 pm

Mark Tatlow wrote:
Flymo748 wrote:I can be so stupid at times.
Flymo


I beleive this has been mentioned; most Missendens for example!


Thank you Mark :-)

I knew that you would rise to the occasion!

Mark Tatlow wrote:Just booked by the way; but will be staying up the road as I failed ot heed David's warning that the last few places in the Abbey were about to go! So perhaps this makes me a tad stupid too!


Oh I don't know - you can be quite inventive too. I still recall how you innovatively tried sniffing that Branchlines wheelset to see how hot it was ;-)

Great to know that you'll be on the Spring Missenden. The Autumn one was really fun, with another good bunch of people. The big decision for me is whether I do loco-building in Tim's group or with Tony, where I very much enjoyed the last weekend.

Decisions, decisions...
Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk

User avatar
dcockling
Posts: 633
Joined: Mon Jun 30, 2008 10:11 am

Re: Sigh...

Postby dcockling » Tue Dec 23, 2014 11:31 pm

Flymo748 wrote:Oh I don't know - you can be quite inventive too. I still recall how you innovatively tried sniffing that Branchlines wheelset to see how hot it was ;-)

Seeing Mark burn his nose has got to have been worth the cost of the course on it's own :D

All the Best
Danny

User avatar
jon price
Posts: 508
Joined: Mon Jun 07, 2010 2:34 pm

Re: Another Round...

Postby jon price » Wed Dec 24, 2014 11:54 am

I'll be at my first Missenden in Spring. Signed up for loco building, I already know about simple workshop accidents so I will arrive with some basic knowledge. Its the actual construction work I'll need advice on. I get the impression there might be a fair few Scalefour people. I'm looking forward to it.
Connah's Quay Workshop threads: viewforum.php?f=125

User avatar
Mark Tatlow
Posts: 753
Joined: Tue Dec 02, 2008 11:24 pm

Re: Another Round...

Postby Mark Tatlow » Wed Dec 24, 2014 1:17 pm

jon price wrote:I'll be at my first Missenden in Spring.


See you there.

Remember to get in early with gyp for Paul though.............
Mark Tatlow

User avatar
David B
Posts: 1204
Joined: Sun Jul 20, 2008 5:30 pm

Re: Another Round...

Postby David B » Wed Dec 24, 2014 1:31 pm

jon price wrote:I'll be at my first Missenden in Spring. Signed up for loco building, I already know about simple workshop accidents so I will arrive with some basic knowledge. Its the actual construction work I'll need advice on. I get the impression there might be a fair few Scalefour people. I'm looking forward to it.


Look forward to meeting you, Jon.

User avatar
Flymo748
Posts: 2356
Joined: Sun Jul 20, 2008 6:00 pm

Re: Another Round...

Postby Flymo748 » Mon Jan 05, 2015 10:21 pm

jon price wrote:I'll be at my first Missenden in Spring. Signed up for loco building, I already know about simple workshop accidents so I will arrive with some basic knowledge. Its the actual construction work I'll need advice on. I get the impression there might be a fair few Scalefour people. I'm looking forward to it.


Hi Jon,

I'm really pleased that you will be there. I'm confident that you'll gain an enormous amount from the weekend.

Have you decided which one of the two Loco-building groups that you would like to be in? There's a choice of Tim Watson or Tony Gee. I'm happy to let you have my views if you'd like a flavour of what is the content of each of them.

I haven't spoken with David Brandreth of this parish yet about them, but I'll probably aim for Tony's group. And no, that's not just to avoid Mark's jokes!

Cheers
Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk

User avatar
Flymo748
Posts: 2356
Joined: Sun Jul 20, 2008 6:00 pm

Gathering winter fuu-uuu-ell...

Postby Flymo748 » Tue Jan 13, 2015 7:57 am

Although it's been quite mild over the last couple of days, the Christmas period had seen us lighting the fire in our living room almost every evening. That usually meant that there was a constant round each morning of restocking the coal scuttle and firewood basket.

So after a bacon sarnie, I was hard at work lugging logs and coal in from the garage to the house ready for the evening's warmth. Whilst I was doing so, I remembered that my stocks of model coal were running low. Yet here in my hands was an entire new stock...

A quick rummage in the kitchen produced an assortment of metal colanders with holes of different sizes, and a stout plastic bag. A return trip to the garage produced a hammer!

Unfortunately we don't have access to Welsh anthracite, to use some proper steam coal, but I selected a lump

This is the result:

IMG_8406.JPG


Three different grades of coal, ready for use. The largest will be to finish the weathering of my Great Eastern Coffeepot.

As can be seen here http://upload.wikimedia.org/wikipedia/commons/6/64/Stratford_Old_%28Locomotive%29_Works_geograph-2382240-by-Ben-Brooksbank.jpg (Y5 image on Wikipedia) these locomotives often had lumps of coal stored on every single possible surface. As they were generally only used for the very lowest of speed shunting duties, I assume that they didn't have the problem of the coal being bounced off when they moved!

I've been meaning to finish weathering my own Coffeepot for a while now, and this has given me a kick up the posterior to get on with it. Like CraigW found on his excellent wagon building topic, I am far too easily distracted!

Cheers
Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk

Terry Bendall
Posts: 1741
Joined: Sun Jul 27, 2008 7:46 am

Re: Another Round...

Postby Terry Bendall » Tue Jan 13, 2015 8:17 am

There is nothing more like coal than ... coal. I have done the same thing for wagon loads and there is lots of coal on Elcot Road part of which can be seen at http://www.scalefour.org/scaleforum/201 ... _7627.html.

I tend to wrap the coal in newspaper since the application of the hammer will soon cause holes to appear in the plastic bag. Mind you the domestic authorities in Flymo's house must be more forgiving than mine I managed to extract one sieve but it is now not suitable for cooking purposes. :( Anther way is to use some etched brass mesh to make a sieve, which is what I use for ash ballast. And on that I use real steam loco ash rather than ash from the domestic fire since it is a better colour.

Terry Bendall

User avatar
Flymo748
Posts: 2356
Joined: Sun Jul 20, 2008 6:00 pm

Happiness...

Postby Flymo748 » Wed Mar 04, 2015 10:21 pm

...is opening an old locomotive kit box to see whether you fancy taking it to Missenden for the weekend, and finding an unused Portescap in there.

That's going to be going on Ebay after I've checked that it runs properly, so mentally is offset against the course cost :-)

Cheers
Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk

martin goodall
Posts: 1062
Joined: Fri Oct 02, 2009 6:20 pm

Re: Happiness...

Postby martin goodall » Thu Mar 05, 2015 6:05 pm

Flymo748 wrote:...is opening an old locomotive kit box to see whether you fancy taking it to Missenden for the weekend, and finding an unused Portescap in there.

That's going to be going on Ebay after I've checked that it runs properly, so mentally is offset against the course cost :-)

Cheers
Flymo



Don't apply power to it until you are sure it has not seized up.

It will probably need re-lubricating.

I haven't done mine yet, but I assume a spray with IPA would be the first step, so as to get any remaining solidified grease out of the gear box. Then what grease to use? LaBelle seems to be virtually unobtainable, so it may have to be something less sophisticated - clock grease, for example?

User avatar
Flymo748
Posts: 2356
Joined: Sun Jul 20, 2008 6:00 pm

Missenden Spring 2015 is go!

Postby Flymo748 » Sat Mar 07, 2015 10:26 am

Last night saw the clans gathering for a virtually full capacity Railway Modelling Weekend at Missenden Abbey. The maximum capacity of the Abbey is 70 places, and we have 69 attendees signed up. It's a tribute to how popular these courses have become. Note to self - book for the Autumn course as soon as it is available...

After an excellent fish and chip dinner, the main room was filled for the ritual Health and Safety briefing.

David Brandreth has just explained to Tim Shackleton how to avoid paper cuts...

Missenden Mar 15 08.JPG


Some of the assembled masses. This room is used for the 4mm modelling cohort, so there are 19 of us happily filing little bits of brass.

Missenden Mar 15 09.JPG


Missenden Mar 15 10.JPG


My own workstation.

Missenden Mar 15 11.JPG


I'm aiming to use the weekend to (nearly) finish a Connoisseur Models GER J65 Buckjumper that I started at Missenden last autumn, and basically haven't touched since. It's being built with CSB suspension, which I'm comfortable with. However it's also going to be my first attempt at split-frame chassis, so watch out for the fun and games!

Until later...
Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk

User avatar
Flymo748
Posts: 2356
Joined: Sun Jul 20, 2008 6:00 pm

Re: Another Round...

Postby Flymo748 » Sun Mar 08, 2015 9:43 pm

jon price wrote:I'll be at my first Missenden in Spring. Signed up for loco building, I already know about simple workshop accidents so I will arrive with some basic knowledge.


And yesterday Jon did indeed do a crackingly good demonstration of workshop accidents as well! So his basic knowledge of them stood him in very good stead.

However once he'd stopped bleeding on the carpets, he returned to his Craftsman kit and by the end of the weekend his soldering skills had improved out of all recognition. A really nice bit of modelling and a good start on the project.

Great to meet you, and hope to see you at Missenden again in the future.
Cheers
Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk

dal-t
Posts: 636
Joined: Mon Jan 11, 2010 8:06 pm

Re: Happiness...

Postby dal-t » Sun Mar 08, 2015 10:28 pm

martin goodall wrote: Then what grease to use? LaBelle seems to be virtually unobtainable, so it may have to be something less sophisticated - clock grease, for example?


P&H Models are still quoting LaBelle 106 (and 107 and 108 oil) ...
David L-T

User avatar
Flymo748
Posts: 2356
Joined: Sun Jul 20, 2008 6:00 pm

Re: Happiness...

Postby Flymo748 » Mon Mar 09, 2015 10:11 pm

martin goodall wrote:
Flymo748 wrote:...is opening an old locomotive kit box to see whether you fancy taking it to Missenden for the weekend, and finding an unused Portescap in there.

That's going to be going on Ebay after I've checked that it runs properly, so mentally is offset against the course cost :-)

Cheers
Flymo


Don't apply power to it until you are sure it has not seized up.

It will probably need re-lubricating.

I haven't done mine yet, but I assume a spray with IPA would be the first step, so as to get any remaining solidified grease out of the gear box. Then what grease to use? LaBelle seems to be virtually unobtainable, so it may have to be something less sophisticated - clock grease, for example?


Hi Martin,

I have renovated a couple of these motors before, and you are absolutely right. Making sure that it isn't seized up is critical.

I have electrical circuit board cleaner in a small aerosol that I can use to remove any dried grease or dust. It is small enough to be controllable, and carries the muck away before it evaporates.

After that, a small drop of clock oil seems to do the trick for lubrication.

Cheers
Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk

martin goodall
Posts: 1062
Joined: Fri Oct 02, 2009 6:20 pm

Re: Happiness...

Postby martin goodall » Wed Mar 11, 2015 3:49 pm

dal-t wrote:
martin goodall wrote: Then what grease to use? LaBelle seems to be virtually unobtainable, so it may have to be something less sophisticated - clock grease, for example?


P&H Models are still quoting LaBelle 106 (and 107 and 108 oil) ...


I think it was LaBelle 102 that was quoted for this application.

I must look it up with P&H Models

Winander
Posts: 182
Joined: Thu Mar 20, 2014 12:19 pm

Re: Another Round...

Postby Winander » Thu Mar 12, 2015 12:50 pm

Hi,

What is the advantage of using LaBelle oil or grease and when/where should each be used? Lubrication, other than my throat ;) , has not occurred to me.

LaBelle 102 is still manufactured (now with PTFE) and some is on fleabay for £10.99. 106 is grease and 107 "for larger scale locos" and 108 "for smaller scale locos" according to the manufacturer. I am curious why a smaller scale would need a different oil to a larger scale - HO (apologies for mentioning it) is the dividing line. http://www.con-cor.com/Labelle.html

What is normally used for running in, the same product as for maintenance or something different?

Sorry for busting in on your thread Flymo and the many questions.

regards
Richard Hodgson

User avatar
grovenor-2685
Posts: 3320
Joined: Sun Jun 29, 2008 8:02 pm

Re: Another Round...

Postby grovenor-2685 » Thu Mar 12, 2015 2:20 pm

Regards
Keith
Grovenor Sidings

billbedford
Posts: 709
Joined: Tue Oct 02, 2012 2:40 pm

Re: Another Round...

Postby billbedford » Fri Mar 13, 2015 8:44 am

Of course, Halfords sell cycle oil with PTFE, which is much the same as the LaBelle oil.
Bill Bedford
Mousa Models
http://www.mousa.biz

martin goodall
Posts: 1062
Joined: Fri Oct 02, 2009 6:20 pm

Re: Another Round...

Postby martin goodall » Fri Mar 13, 2015 10:33 am

I know nothing about the technology of lubricants. So I am dependent (like most other modellers, I imagine) on recommendations for a lubricant which

(a) will not attack the nylon bevel gears in a Portescap gearbox, and

(b) will 'stick' to the gears, rather than being thrown off as the gears turn.

The grease whch was applied to Portescap gearboxes before they were supplied to the customer obviously fulfilled both these criteria. The problem we have is finding a replacement in order to re-lubricate Portescap gearboxes which have seized up (mainly, it must be admitted, due to their not having been run recently, or at all in some cases).

I understand that LaBelle 102 has been recommended for this application, although I have no knowledge of the technical specifications that make it suitable. I am sure there are other lubricants that will fill the bill, but I have no means of knowing whether the other products that have been mentioned do in fact meet both of the criteria listed above.

Some advice specifically addressed to this point (preferably from someone with expert technical knowledge of these lubricants) would be very welcome.

[P.S. I have some unused grease which was supplied either by Trans-Europ Models as successors to Studiolith, or possibly by Exactoscale in their early days. I beleve it was intended for use with the precision gearboxes that they supplied at the time, rather than for Portescaps, but I and wonder whether this might possibly be suitable?]

User avatar
Guy Rixon
Posts: 695
Joined: Sun Mar 27, 2011 6:40 pm

Re: Another Round...

Postby Guy Rixon » Fri Mar 13, 2015 1:45 pm

martin goodall wrote:I have some unused grease which was supplied either by Trans-Europ Models as successors to Studiolith, or possibly by Exactoscale in their early days. I beleve it was intended for use with the precision gearboxes that they supplied at the time, rather than for Portescaps, but I and wonder whether this might possibly be suitable?


I bought some of the grease sold by Exactoscale for gearboxes. Over many years, it dried out and became like rosin. So even if it's the right kind of product for Escap gears, I would not want to risk an old batch on an expensive gearbox.

User avatar
grovenor-2685
Posts: 3320
Joined: Sun Jun 29, 2008 8:02 pm

Re: Another Round...

Postby grovenor-2685 » Fri Mar 13, 2015 2:45 pm

For the de-luxe approach see http://www.nano-oil.com/Model%20RailRoad.html
Keith
Regards
Keith
Grovenor Sidings


Return to “Flymo748”

Who is online

Users browsing this forum: No registered users and 0 guests