Re: 1980's cars and other road vehicles
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
thanks Mark
Sometimes the stuff in the toybox needs a bit of a sympathic eye to see any hope for it. I present you..
The Matchbox Dodge Command and below after some hacking to the cab and marrying to a base toys chassis and modified box body
The picture below shows where the destruction was required!
Cheers
Jim
Sometimes the stuff in the toybox needs a bit of a sympathic eye to see any hope for it. I present you..
The Matchbox Dodge Command and below after some hacking to the cab and marrying to a base toys chassis and modified box body
The picture below shows where the destruction was required!
Cheers
Jim
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Hi All
Using all of my creative powers I came up with the title of white van men for the following picture. Thats because its, erm, a load of white vans!
Cheers
Jim
Using all of my creative powers I came up with the title of white van men for the following picture. Thats because its, erm, a load of white vans!
Cheers
Jim
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Hi All
Thanks to feedback on another forum my Lutons now have a representation of Translucent roofs.
Another project that was a tad more involved than I first thought was my VW van.
The main thing was to file the windscreen aperature to allow a much wider window. Another minor mod was to thin the bumper down under the doors where it forms a step and drill out the headlights.
Cheers
Jim
Thanks to feedback on another forum my Lutons now have a representation of Translucent roofs.
Another project that was a tad more involved than I first thought was my VW van.
The main thing was to file the windscreen aperature to allow a much wider window. Another minor mod was to thin the bumper down under the doors where it forms a step and drill out the headlights.
Cheers
Jim
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Hi All
Progress on my White arrow van
A little comparison of where it started from.
I am hoping this might end up another signature vehicle (like my WHSmiths lorry) that spark a few memories for people.
Cheers
Jim
Progress on my White arrow van
A little comparison of where it started from.
I am hoping this might end up another signature vehicle (like my WHSmiths lorry) that spark a few memories for people.
Cheers
Jim
-
- Posts: 884
- Joined: Thu May 21, 2009 8:11 am
Re: 1980's cars and other road vehicles
"..that spark a few memories for people" Jim, you've succeeded already!
Make Worcestershire great again.
Build a wall along the Herefordshire border and make them pay for it.
Build a wall along the Herefordshire border and make them pay for it.
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Thanks
A before and after shot showing what can be had from the toybox.
In this case the Corgi mobile shop, narrowed, fitted with new wheels and the sides filled in to produce something more like a Mercedes 307D
Cheers
Jim
A before and after shot showing what can be had from the toybox.
In this case the Corgi mobile shop, narrowed, fitted with new wheels and the sides filled in to produce something more like a Mercedes 307D
Cheers
Jim
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Hi All
A few more lorries for you
Another Dodge commando from a modified matchbox cab and a Base toys Leyland FG
A Base toys Roadtrain converted to a Freighter - below is how the cab was chopped up
This was re-assembled then the back cut off to loose the small window. a spot of filler and some sanding and its done.
Cheers
Jim
A few more lorries for you
Another Dodge commando from a modified matchbox cab and a Base toys Leyland FG
A Base toys Roadtrain converted to a Freighter - below is how the cab was chopped up
This was re-assembled then the back cut off to loose the small window. a spot of filler and some sanding and its done.
Cheers
Jim
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
And now a few cars
Austin Maestro from the 3D print from Paul Burkitt-Gray For more on the evolution of this model see http://www.rmweb.co.uk/community/index.php?/topic/46411-austin-maestro-cad-3d-printing-project/
This next project was a bit of a suck it and see one - the Ford Sierra from the Hornby (um) thing. Suck it and see because it it didnt work out its no big deal. Below is what I came up with (with an original for comparison)
Best keep these towards the back of the layout I think but a fun little project none the less.
Cheers
Jim
Austin Maestro from the 3D print from Paul Burkitt-Gray For more on the evolution of this model see http://www.rmweb.co.uk/community/index.php?/topic/46411-austin-maestro-cad-3d-printing-project/
This next project was a bit of a suck it and see one - the Ford Sierra from the Hornby (um) thing. Suck it and see because it it didnt work out its no big deal. Below is what I came up with (with an original for comparison)
Best keep these towards the back of the layout I think but a fun little project none the less.
Cheers
Jim
-
- Posts: 1382
- Joined: Tue Jul 29, 2008 9:24 am
Re: 1980's cars and other road vehicles
Looks more like an Austin Ambassador.
That would be an ecumenical matter.
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
One of these? http://www.google.co.uk/search?q=Austin+ambassador&oe=UTF-8&hl=en&client=safari&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=yzxeT4_PG83m8QP9-pndDg&biw=768&bih=946&sei=3zxeT_ibH4iH8gOU3uyWAw
Are you sure? A Talbot Alpine yes. Here's my efforts so far to see if I can make one.
Cheers
Jim
Are you sure? A Talbot Alpine yes. Here's my efforts so far to see if I can make one.
Cheers
Jim
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Hi All
A modernised mini (if you can call something about 30 years old modernised), its shown here compared with the original version
As an aside this is Halfords ford signal yellow which is supposedly a good match for Warning panel yellow - as you can see its no where near.
Cheers
Jim
A modernised mini (if you can call something about 30 years old modernised), its shown here compared with the original version
As an aside this is Halfords ford signal yellow which is supposedly a good match for Warning panel yellow - as you can see its no where near.
Cheers
Jim
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: 1980's cars and other road vehicles
Those Minis need the silver plastic trim along the seams hanging off, could never get it to stay on. If only Duct Tape had been invented earlier....
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Some would say that they left the factory like that Tim!
-
- Posts: 1253
- Joined: Wed Sep 01, 2010 9:57 am
Re: 1980's cars and other road vehicles
Jim just looking back at the whitevans should one or 2 be missing off side lights and scrapes down the side. Maybe a learning taxi driver & motorbike stuck in the grill?
Doug
Still not doing enough modelling
Still not doing enough modelling
-
- Forum Team
- Posts: 3044
- Joined: Sun Jul 20, 2008 6:00 pm
Re: 1980's cars and other road vehicles
Tim V wrote:Those Minis need the silver plastic trim along the seams hanging off, could never get it to stay on. If only Duct Tape had been invented earlier....
How old was your Mini then Tim?
"In 1942 Revolite, formerly a division of Johnson & Johnson, originally developed an adhesive tape made from a rubber-based adhesive applied to a durable duck cloth backing. This tape resisted water and was used as sealing tape on ammunition cases during World War II"
My Mini (my first every car - a chocolate brown Clubman) would never have had silver trim on the seams - you couldn't have forced it in place over the bubbling rust! That car finally bit the dust when the driver's door fell off due to the metal collapsing around the hinges...
Great fun though, and I'd have a "classic" Mini again if I had the room. Although in terms of classics, I'm currently talking with a friend about acquiring this:
I just need to find space in the garage...
Flymo
You do not have the required permissions to view the files attached to this post.
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk
www.5522models.co.uk
-
- Posts: 163
- Joined: Sun Jul 20, 2008 3:00 pm
Re: 1980's cars and other road vehicles
Minis without the chrome trim still had a metal finisher applied, it was just that it was the same colour as the rest of the body. My old pick-up had these and they seemed to last much better than the plastic chrome - my truck had withstood a flood and cost all of £20 but still gave another four years service. For the real mini afficionados it was one of the very rare commercials with a one piece rear bumper rather than the pair of quarter bumpers.
Tony Comber
Tony Comber
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: 1980's cars and other road vehicles
My Mini was a Clubman Estate on a K plate, so would have been about eight years old when I got it and about 11 years old when it went to the great motorway in the sky in '83. I then acquired a MK1 Cortina (now there's another car for you to model Jim) on a D plate which lasted till about '87. My first car was a split screen Morris Minor which went to the great A road in the sky in '74, if only I'd kept it. Bit outside Jim's period.
Umm nice looking bike there Paul. I'm sure there's room in the garage....
During the eighties I was also spinning around on my BSA Bantam (still got it now), a 1955 model - another item for Jim to model!
And I was shown today on the Finney and Smith stand a BSA Bantam produced by 3D printing. I think one may appear on Clutton.....
Umm nice looking bike there Paul. I'm sure there's room in the garage....
During the eighties I was also spinning around on my BSA Bantam (still got it now), a 1955 model - another item for Jim to model!
And I was shown today on the Finney and Smith stand a BSA Bantam produced by 3D printing. I think one may appear on Clutton.....
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Now I am really asking for trouble - the VW beetle!
My friend had an 'oval' so i have attacked the oxford beetle.
So far I have filed off the canvas roof, added a small bit of filler to the upper windscreen corners (the windscreens seemed rounder on the oval beetles) and filed off the indicators. the rear window was glued and filled and an oval cut into it (needs a bit more filler yet). Luckily the oxford beetle has the smaller tail lights as per my friends car.
Cheers
Jim
My friend had an 'oval' so i have attacked the oxford beetle.
So far I have filed off the canvas roof, added a small bit of filler to the upper windscreen corners (the windscreens seemed rounder on the oval beetles) and filed off the indicators. the rear window was glued and filled and an oval cut into it (needs a bit more filler yet). Luckily the oxford beetle has the smaller tail lights as per my friends car.
Cheers
Jim
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Hi All
Ive added some thoughts on Oxfords Transporter to my work bench
For more see http://www.p4newstreet.com/category/workbench
Cheers
Jim
Ive added some thoughts on Oxfords Transporter to my work bench
For more see http://www.p4newstreet.com/category/workbench
Cheers
Jim
-
- Posts: 1382
- Joined: Tue Jul 29, 2008 9:24 am
Re: 1980's cars and other road vehicles
An acquaintance of mine lives in Coventry. He has a 1974 NSU Ro80. Not inconceivable that he drove it around Birmingham in the 1980s...
That would be an ecumenical matter.
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Bit ugly ain't it?
Doesn't really fit with my approach of modelling 'ordinary' though.
Cheers
Jim
Doesn't really fit with my approach of modelling 'ordinary' though.
Cheers
Jim
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Hi all
Added some thoughts on modelling Minis to my workbench
For more see http://www.p4newstreet.com/category/workbench
Cheers
Jim
Added some thoughts on modelling Minis to my workbench
For more see http://www.p4newstreet.com/category/workbench
Cheers
Jim
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Hi all
Started work on the BW Models kit for the Volvo FL6
This one is going to be a challenge! For more see http://www.p4newstreet.com/category/workbench
Cheers
Jim
Started work on the BW Models kit for the Volvo FL6
This one is going to be a challenge! For more see http://www.p4newstreet.com/category/workbench
Cheers
Jim
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
I have to admit I've quite enjoyed getting to grips with this. The beauty of a white metal kit is that you can tweak it with low melt solder used as a filler. You don't have to wait for it to dry and it doesn't break away when you attack it with files and filler. I decided to do a solid sided box and do away with the windbreak in the end. I also replaced the marker/indicator lights and added the rainstrips from wire. The front panel, below the windscreen was filled with solder, sanded smooth and the panel re-scribed so that it was the same height at both ends! Below is where it is now.
Cheers
Jim
Cheers
Jim
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: 1980's cars and other road vehicles
Still some little details to do but this ones pretty much done.
Theres a certain sense of achievement when kits don't just fall together from the box.
Cheers
Jim
Theres a certain sense of achievement when kits don't just fall together from the box.
Cheers
Jim
Who is online
Users browsing this forum: No registered users and 2 guests