As part of an ongoing program to upgrade my portable layout I have come to the point where I need to start adding some lineside fencing. A few particulars should be mentioned; it is a light railway (fictional), time period- early to mid 1950s, condition - generally run down ie skint. I am thinking (hoping) that wire and post should be adequate, can anyone offer some suggestions? One final thing, what happened to the fence when the line passed through a bridged cutting, did it go up the slope or terminate at a convenient spot?
Cheers,
David
Lineside fencing regulations
Re: Lineside fencing regulations
Post & wire is quite adequate. It could be sleepers cut in half (lengthwise) with 5 wires. Have you looked at the Youtube videos of light railways for some inspiration? I know the K&ESR is on there.
The fence would run up the edge of the cutting - it usually designated the boundary of the railway land. The rules in Britain required the railways to fence their land and make it stock-proof - from domestic farm animals.
The fence would run up the edge of the cutting - it usually designated the boundary of the railway land. The rules in Britain required the railways to fence their land and make it stock-proof - from domestic farm animals.
Tim V
Scalefour News Editor
Scalefour News Editor
-
- Posts: 631
- Joined: Sun Jul 20, 2008 6:02 pm
Re: Lineside fencing regulations
Thanks Tim, very useful on all counts. One other thing though, what would the typical spacing be between posts?
Cheers,
David
Cheers,
David
- Russ Elliott
- Posts: 930
- Joined: Thu Jun 02, 2011 6:38 pm
Re: Lineside fencing regulations
For the spacing of posts for this type of fencing, my guess is in the region of 8'. (There were drawings in GWRJ #13 and #56, which I haven't got access to at the moment.)
-
- Posts: 137
- Joined: Mon Jul 21, 2008 10:34 am
Re: Lineside fencing regulations
I would say that i would be nearer to six foot spacings. again no evidence to support this but a gut feeling.....
Re: Lineside fencing regulations
I can only speak for the GWR. The Ratio kit for lineside fencing gives 20mm between posts. I made it to this , but it looked wrong. I went out and measured some on the Camerton line (closed 1952), and it was 6'.
Tim V
Scalefour News Editor
Scalefour News Editor
Re: Lineside fencing regulations
This subject was discussed in some length on RMWeb some time back, I suggest you may find more information on this link
http://www.rmweb.co.uk/community/index. ... msearch__1
H T H
Wally
http://www.rmweb.co.uk/community/index. ... msearch__1
H T H
Wally
Re: Lineside fencing regulations
Ok this is BR or LNER fencing in East Suffolk....
Builder of Forge Mill Sidings, Kirkcliffe Coking Plant, Swanage and Heaby. Still trying to "Keep the Balance".
-
- Posts: 631
- Joined: Sun Jul 20, 2008 6:02 pm
Re: Lineside fencing regulations
Hardwick wrote:Ok this is BR or LNER fencing in East Suffolk....
Hmm, Looks like if I grow my grass long enough I can get away with just showing the posts

Cheers,
David
Re: Lineside fencing regulations
davknigh wrote:Hardwick wrote:Ok this is BR or LNER fencing in East Suffolk....
Hmm, Looks like if I grow my grass long enough I can get away with just showing the posts![]()
Cheers,
David
If you do you may be eligable for a grant from the EEC for helping wildlife through the field margins scheme!
Wally
Re: Lineside fencing regulations
Tim V wrote:I can only speak for the GWR. The Ratio kit for lineside fencing gives 20mm between posts. I made it to this , but it looked wrong. I went out and measured some on the Camerton line (closed 1952), and it was 6'.
Tim,
I've just dug out my copy of GWRJ No. 56 (with the drawing of the the GW wire and post fencing) which has the distance between posts as 6'. By the way 56 is a good issue as it has the article on local freight working on the Radstock line.
Return to “Other Buildings and Scenery”
Who is online
Users browsing this forum: No registered users and 1 guest