Swanage (again)

Tell us about your layout, where you put it, how you built it, how you operate it.
nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Swanage (again)

Postby nberrington » Thu Dec 27, 2018 2:02 pm

I thought I would shift over to a formal layout thread, as the “scenic modules” have now progressed beyond “baseboards and carpentry.”

What started out as a potential module of the Swanage MPD to showcase my locos has suffered from a massive dose of concept creep, and now is an attempt to model Swanage.

I know it’s been done to death, but many of my vacations in the UK have been spent in Dorset - so why not? Other that being ambitious and potentially boring due to the lack of scenic landscape, there is not a lot of potential in a space 20’ x2’.

The Christmas holidays brought some spare time, so good progress was made.

The turntable was temporarily installed to help establish roadbed height, and cork underlay glued down. The roadbed is glued with “No More Nails” - a water soluble very tacky glue available in North America. It remains somewhat flexible, but takes a day or two to really set up.

This time weight provided by books in the library - whatever looks heavy and on hand.

6E9FBA27-5144-4687-9835-CD27A6ACE6C7.jpeg
0745B90F-F2AA-4F7D-BB5C-C2ADBBAAFF13.jpeg
109F0C88-6ECE-4EDB-A43D-8DA4355DF671.jpeg
You do not have the required permissions to view the files attached to this post.
Last edited by nberrington on Sat May 16, 2020 10:32 pm, edited 2 times in total.

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Sun Dec 30, 2018 5:15 pm

Some further tweaking around the MPD. I think some improvements can be made. I’ll recut the profile when I get a chance....

70B9BBC5-CA9C-416E-AC08-E685E2E3BD7F.jpeg

DFF39F08-D173-4DFB-9AF0-F3A395FDEB57.jpeg


The roadbed has been glued done now - curves look right when I lay the template over it.
95104ADA-42F5-41BE-9B83-02ECB37FB2FB.jpeg

A3BA2DDA-57C3-40C1-8D1B-79B3189AAA21.jpeg
You do not have the required permissions to view the files attached to this post.

User avatar
steve howe
Posts: 911
Joined: Sun Feb 01, 2009 10:16 pm

Re: Dorset 1937

Postby steve howe » Mon Dec 31, 2018 3:19 pm

Nice work :thumb
What make of turntable is that Neil?

Steve

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Mon Dec 31, 2018 4:33 pm

It’s the C&S 60ft from Midland Railway Centre:

http://www.midrailcentre.com/4mm-scale-00-em-p4#anchor

As far as I know it is the correct turntable, but I did use some modellers licence and made it a 60ft instead of the prototypically correct 50ft. The original Swanage turntable was somewhat limited in this respect, and I did want to run locos on the layout and turn them. I compromised for operational reasons.

Mark Stapleton did a nice piece on construction on this forum. It has some tricky problems you need to work around.

Here are some pictures from earlier this year :

2245C2D1-0CD6-4F9B-84A9-9E1BDEE9C566.jpeg

F4C83083-4223-4774-8CD0-8515648E64B8.jpeg
BDC18CB4-D893-4190-9825-ACAF22264D06.jpeg
You do not have the required permissions to view the files attached to this post.

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Mon Dec 31, 2018 4:40 pm

Here is the link the Mark’s description:

viewtopic.php?f=95&t=2503&p=26912&hilit=Turntable#p22020

User avatar
Le Corbusier
Posts: 1598
Joined: Wed Feb 11, 2015 3:39 pm

Re: Dorset 1937

Postby Le Corbusier » Wed Jan 02, 2019 8:50 am

Can I ask what the road bed is? .... you say cork but it looks to have some sort of additive - or perhaps the type is unfamiliar? It has a lot of black in it similar to a cork/rubber combo gaskets I sometimes get for my 70s VW Camper rocker heads.

Have you used 'no more nails' for the foam as well?

75817.jpg


Tim
You do not have the required permissions to view the files attached to this post.
Tim Lee

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Wed Jan 02, 2019 3:17 pm

The trackbed.

I’ve experimented with a variety of track beds with P4 track products on my “feasibility” project some years ago. I found Woodland Scenics foam to have quite a bit of “give”. This seemed fine on thick plastic sleepers, but flimsy for the thin ply product from Timber Tracks. I resorted to cork as I have had enormous difficulty sourcing C&L or Exactoscale track from this side of the pond.

In the cork line, I initially tried gasket cork. This is high quality, dense stuff. I bought a 2mm thickness, which in hindsight isn’t quite right.
I’ve now settled on Midwest Products cork. The advantages are that the stuff is 45mm wide. Perfect. You can use them “solid”, or split in two which will give you two bevelled pieces. The disadvantage is that the bevels don’t separate cleanly and one needs to sand the edge a bit. One needs to do this anyway, as the angle of repose is 45 degrees.
midwest cork 3.jpg

midwest cork.jpg

midwest cork 2.jpg
midwest cork 2.jpg


I made a small sanding jig to allow me to thin it down to 3mm for the turntable-MPD area. It tolerates sanding quite well.

sanding jig.jpg


The “No More Nails” is great for gluing this down. It has a slight flex, but importantly is immediately tacky and will hold things in place while you tweak the alignment. Great to work with! I made an error or two and could remove it with a sharp chisel even after it had cured.

Gluing Foam

My previous experiments included PVA glue, Gorilla glue, expanding foam sealer and high quality wood glue. The PVA is inconsistent in quality, and I would encourage you to buy the good stuff. I had a batch that didn’t really set up for several weeks. The expanding foam sealer makes a bond that can be compromised if you don’t weight it down well – because it expands like crazy.

glue.jpg


The Aussie product - Gorilla glue is excellent. You also need to compress it evenly and dampen the surface before. It makes fierce bond that is a bit tough on foam cutters. Unfortunately, much like Aussie cricketers though, Gorilla glue can be extremely irritating. My delicate hands don’t like blistering redness….. So wear gloves. I chose not to use it beyond the first few baseboards I assembled. Even with gloves I found it foul stuff.

So I finally settled on high quality LePage wood glue. The stuff is activated by pressure, and won’t set without it. It is fantastic for gluing wood under a clamp. It was used throughout the layout and it made a great bond. It will sort of cut with a wire foam cutter, but I did break a couple of wires doing it.
You do not have the required permissions to view the files attached to this post.

David Knight
Posts: 810
Joined: Sun Jul 20, 2008 6:02 pm

Re: Dorset 1937

Postby David Knight » Thu Jan 03, 2019 12:25 am

I've been using the same roadbed as Neil and it is very much like gasket material. As a plus, if you have any gaps to fill, the strips can be filed with a rasp and the dust left behind mixed with PVA blends in very nicely. I used water based contact cement from the local hardware to fix my strips down. Instant grab, low odour the only inconvenience is waiting for the stuff to go off before placing. If you are unsure of positioning some waxed paper between baseboard and track base lets you get things lined up.

Cheers,

David

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Sun Jan 06, 2019 7:04 pm

Revisited the turntable coping and approach
Epilog laser makes quick work of things....
BA69EA8E-9FF4-4461-9996-E463EA3D42C4.jpeg

EF87784A-C3C9-4BA4-9F07-7D2AA876BBD2.jpeg


D59E4351-AE04-4861-B91F-BE731531CBCA.jpeg
Did a mock up of the goods shed while I was at it;
8C7F3186-3DC4-4D28-939C-38773EC0EE3B.jpeg

81A42BED-62D3-44AD-BFF5-A64814727C39.jpeg

1281D19E-7285-4018-ACC8-C7836BF145C1.jpeg
You do not have the required permissions to view the files attached to this post.

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Sun Jan 13, 2019 1:27 am

Moving to the turntable pit - some Chooch Industries flexible wall placed- coping glued in place:

94EF5323-1343-4FE4-873D-65D250697EEC.jpeg

5871D052-0075-4284-9A07-4E88E1B5AA7B.jpeg


Feline Inspector of Works, Kato, seems to approve:

0734FD7B-3188-4C32-854E-13025329086D.jpeg

E96F519F-BF1E-4489-BD70-48E87257161E.jpeg
You do not have the required permissions to view the files attached to this post.

David Knight
Posts: 810
Joined: Sun Jul 20, 2008 6:02 pm

Re: Dorset 1937

Postby David Knight » Sun Jan 13, 2019 3:16 pm

Great progress Neil :thumb :thumb . The goods shed looks particularly interesting, will you be cladding the outside with the same material you used on the turntable wall?

Kato puts me in mind of our late Maggie who used to supervise my efforts for many years :cry:

Cheers,

David

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Mon Jan 14, 2019 2:03 am

Hi Dave

The goods shed is a basic shape mock up drawn quickly on Corel. I have some dimensional corrections to make, and I missed a few windows not on the plans I had. (Period photos don't lie.) I'm still not sure how I intend to do the stonework. The Chooch stone used on the turntable is a funky flexible vinyl, and is barely OK - it's "wiggly" - not easy to cut and glue - wouldn't like it for a building (I think).

Historically I have used Wills plastic card, but I think the stones are too large for dressed Purbeck stone seen around Swanage - and it isn't the easiest stuff to use.. I might have to scribe them (not a job I would relish considering the size of the shed). I'm currently trying to learn the finer points of Corel, so that possibly laser cutting the cladding is an option.

I ran some experiments today on the laser. Romark didn't engrave well and curled up - obviously a learning curve..... Styrene is dodgy and gets the melts if the setting are wrong, but I did get some nice hairlines going with repeat cuts on low power fast speed and frequency.

More to follow when I figure it out. Unfortunately vinyl is a no-no - due to toxic gas and wrecking of machines. Considering I access the laser at a "maker space" with a a co-operative of users, I won't even try.

Long explanation for the short answer - "not there yet".

Sadly I have to get back to the real world this week, and the gigantic project of re-inventing neuro for the Province. Some smart aleck has decided to "un-regionalize" our Health System.

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Fri Jan 25, 2019 11:33 am

Some details- ashpit with stone walls, service pit in brick (can’t really be seen -in the shed, but I was playing with Corel. I suppose I should have tried to do Flemish bond, but I was having fun drawing little bricks.....

00C9B80F-0C0D-42C9-89C1-341EBC095AD5.jpeg
EB59A57D-29F5-40B6-9987-BA8F3A27C81E.jpeg
7E33FA63-11EC-463D-8285-576ACC081C65.jpeg
BEA98341-0A7A-45AB-91C7-2F28382103ED.jpeg
F04D97F7-7264-42F5-ADFF-0A904252BC3F.jpeg
You do not have the required permissions to view the files attached to this post.

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Mon Feb 11, 2019 12:20 am

Tackling the last of the rough jobs - fascia boards. Now that I have the basic contour of the landscape, I could shape the ply accordingly.

Bending around corners requires some soaking and plenty of clamps.....

2E3CB8CC-7418-4374-A4C8-BB703C0F6F34.jpeg

3B617692-F98B-4549-9485-16F4AFA0CA3A.jpeg

BF4C13D3-6B55-47C2-8615-4FAF74CD4542.jpeg
You do not have the required permissions to view the files attached to this post.

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Tue Mar 19, 2019 10:49 pm

Some idle doodling done last week:

E591D528-54E2-427D-A87D-7485B252392E.jpeg


I still need to do the faces - but I prefer oil washes for that...
You do not have the required permissions to view the files attached to this post.

User avatar
Paul Willis
Forum Team
Posts: 3031
Joined: Sun Jul 20, 2008 6:00 pm

Re: Dorset 1937

Postby Paul Willis » Sat Apr 06, 2019 10:30 am

nberrington wrote:Some idle doodling done last week:

E591D528-54E2-427D-A87D-7485B252392E.jpeg

I still need to do the faces - but I prefer oil washes for that...


Lovely painting. A real depth and impression of the folds in the cloth. I clicked on the picture and zoomed out in to have a closer look, and the figures just got better and better :-)

Very realistic range of colouring for the clothes as well. Workaday, but subtly different from figure to figure.

More inspiration please!

Cheers,
Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk

User avatar
Julian Roberts
Posts: 1388
Joined: Sat Jan 09, 2010 11:33 pm

Re: Dorset 1937

Postby Julian Roberts » Sun Apr 07, 2019 8:48 am

Neil I've just caught up with this amazing thread. Are those figures brush painted?

This link is the only one I can find on a Google search that refers to Mike Walshaw's 00 layout "Westport". It is based on Swanage and he now lives there. He has written extensively about it in various magazine articles over the years. He and his modelling I found a terrific inspiration when I started in this hobby about 20 years ago, when he lived near Glasgow. I'm saying this just in case you're interested and I expect he'll be very interested too in your project.

http://www.brmodelling.com/story2.htm

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Sun Apr 07, 2019 12:15 pm

Thanks for the kind words Flymo and Julian. The figures are indeed brush painted. My wife and I have been doing them over the last few weeks as my work schedule hasn’t allowed me the time to work on the big project (i.e. the layout itself.) she has a great eye for colour and is a very neat painter.

The figures are brush painted in acrylics - Vallejo, Reaper and P3 paints. The technique is a layering technique trying to keep to reasonable rules of clolour theory. The highlights are mostly an overhead (zenithal lghts technique). This is hard to pull off in 1:72. Both of us are more used to 54mm figures in the figure painting world.

The faces are still blank as I prefer oil for faces. Will start on them in due course.....

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Sun Nov 10, 2019 2:32 am

Progress has been slow over the last few months. Work can be annoying sometimes....

Anyway- a shell of smoothon two part resin now covers the foam. The stuff is light and solid as a rock.

5F2AFF07-4203-4A31-88EC-288FA8B3964C.jpeg
F375030B-324F-46BB-8D50-9B01D1EF3F33.jpeg
5F2AFF07-4203-4A31-88EC-288FA8B3964C.jpeg
You do not have the required permissions to view the files attached to this post.

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Sun Dec 15, 2019 8:52 pm

Some progress since last update
Most of the messy work is now done- time to start actually laying track!

CFF9A8D4-E266-43A1-9965-566961E3E515.jpeg
B1A10860-ED40-49FA-9014-3BE2A8B75D6D.jpeg
AE87D21C-FCF0-43BE-8EE7-2049C156F9F4.jpeg
42623D9E-39E4-4F9F-9D9B-A9B8496D6663.jpeg
You do not have the required permissions to view the files attached to this post.

User avatar
Le Corbusier
Posts: 1598
Joined: Wed Feb 11, 2015 3:39 pm

Re: Dorset 1937

Postby Le Corbusier » Sun Dec 15, 2019 9:37 pm

I am really enjoying watching this come together :thumb - Track next .... shame there isn't a clapping emoji for that :D
Tim Lee

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Thu Jan 02, 2020 11:44 am

Last of 2019 - rural lane - stages of construction..

A vertical strut of foam core buried in styrofoam and secured with gorilla glue
Split pieces of chooch industries stone wall secured to the support
Coping made from hydrocal bits
Needs a bit more work, but getting there!

22E35BE4-40C4-4A60-8BAE-EFBADCCAFD9B.jpeg
6119B881-B765-4EB5-BFD3-E4D0FB7A4F6C.jpeg
DEE3B61C-36F9-4C3A-BA60-D5E725BDB232.jpeg
[attachment=1]AEBFB1EA-86B3-4169-AE71-19A4FC8E9171.
You do not have the required permissions to view the files attached to this post.

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Thu Jan 02, 2020 11:53 am

F5C7D3C4-D6D0-4F0E-8C8B-2FD3E26BE3A2.jpeg
57ECCB9D-113E-40ED-8B14-5FE00A0E832B.jpeg
B2B3953A-194A-451E-B80B-06A6528D503C.jpeg
550D66B1-C056-49FB-8F06-5DE3529E975E.jpeg
You do not have the required permissions to view the files attached to this post.

User avatar
Noel
Posts: 1972
Joined: Wed Jun 23, 2010 1:04 pm

Re: Dorset 1937

Postby Noel » Thu Jan 02, 2020 3:01 pm

Regards
Noel

nberrington
Posts: 575
Joined: Thu Dec 04, 2008 2:15 pm

Re: Dorset 1937

Postby nberrington » Thu Jan 02, 2020 3:29 pm

Wow - thanks Noel. I am going for the overgrown look of the walls I saw near Norden.

wall.jpg

wall 2.jpg


The vertical copestones are going to be interesting, as I have about 6 ft of it to do on the retaining wall across from the passenger platform. I started out, but it's a very slow process, as one needs tiny stones to simulate them!
You do not have the required permissions to view the files attached to this post.
Last edited by nberrington on Thu Jan 02, 2020 3:42 pm, edited 2 times in total.


Return to “Layouts and Operations”

Who is online

Users browsing this forum: ClaudeBot and 2 guests