Terry Bendall wrote:I will give you an A grade for woodwork Mark, or perhaps it should go to your assistants.
Looks like birch plywood to me. What thickness did you use?
.................mostly to my assistant I would have to admit!
Yes, it is birch ply and the perimeter is in 6mm and the internal braces in 4mm. I mentioned that we would be laminating onto this with formers for the ground levels (which will include preformed holes for pattern makers dowels) which will be 4mm. What I am describing will be more clear in the next photos, hopefully.
Tim (my assistant) reckons to be able to build to 1/2mm and certainly, when it came to gettign these square, we stopped when we thought we were at this level of accuracy!
Somewhat of an improvement on my previous efforts!