NAG Meeting17th May 2018

Moderator: ken kirk

User avatar
Posts: 938
Joined: Sun Feb 15, 2009 4:39 pm

NAG Meeting17th May 2018

Postby RobM » Fri Jun 01, 2018 6:36 am

Nine members present at the meeting.
Members were working on their own projects as follows:
 David Clark was building a Lanarkshire Models etched LMS tender chassis.
 Howard Bolton was sizing up an etched brass GWR broad gauge 4-2-2
‘Rover’ kit in 7mm scale! This certainly won’t run on our test track.
 John Slack was constructing a Salop Group lever frame kit.
 Ken Kirk was batch building GNR over bridges in plasticard.
 Nigel Fawcett was constructing some card steps for his Cupar overbridge.
 Brian Slater was constructing Slaters LMS 5 plank open wagons.
 Richard Marshall was filing point blades for the NAG layout using the S4S
 Bevis Heap was assembling a SR brake van from a Cambrian kit.
 Martin Neild was busy building an RSH 0-4-0ST from a High Level kit.
Bevis appealed for members to look after our Test Track at the DEMU Showcase
in Burton Town Hall on 2/3 June.
Richard Marshall 31 May 2018
Updated December 2016

Return to “Nottingham Area Group (NAG)”

Who is online

Users browsing this forum: No registered users and 1 guest