Hi all,
I've recently purchased an Rsu. What I wish to know is what the connection called attached to the negative lead to connect to the unit. It looks a bit like a 3.5mm audio jack but with splines running up the metal tip. I can't find them for the life of me. I wish to make up a couple of spare return leads to connect to a couple of different sized metal work plates and one to a ground flat crocodile clip. If anyone can help me with the name of the connectors used to attach the leads to the unit I'd be ever so grateful. Thankyou for reading,
Take care ✌️
London road models RSU electric connector type?
-
- Posts: 12
- Joined: Tue Jan 31, 2023 6:36 pm
-
- Posts: 1172
- Joined: Mon May 14, 2012 4:27 pm
Re: London road models RSU electric connector type?
Hi Stu,
Most likely 4mm dia. Banana Plugs, like these:
https://uk.rs-online.com/web/p/banana-c ... rs/2080274
Martin.
Most likely 4mm dia. Banana Plugs, like these:
https://uk.rs-online.com/web/p/banana-c ... rs/2080274
Martin.
40+ years developing Templot. Enjoy using Templot? Join Templot Club. Be a Templot supporter.
-
- Posts: 131
- Joined: Sat Dec 05, 2015 2:03 pm
Re: London road models RSU electric connector type?
I concur with Martin.
What you need are 4mm banana plugs, but in fact what you really need are the sockets to add to your various steel plates
https://www.rapidonline.com/pjp-3230-c-n-black-4mm-socket-17-0600
This is the socket I have used.
Steve
What you need are 4mm banana plugs, but in fact what you really need are the sockets to add to your various steel plates
https://www.rapidonline.com/pjp-3230-c-n-black-4mm-socket-17-0600
This is the socket I have used.
Steve
-
- Posts: 1519
- Joined: Sun Jul 20, 2008 5:30 pm
Re: London road models RSU electric connector type?
I refer you to this post which has links to the right bits at RS: https://www.scalefour.org/forum/viewtopic.php?f=7&t=138&hilit=RSU&start=50#p64062
If you look at my video you will see how I have made a connection to my metal plate. The relevant part begins at about 3mins 30 secs.
If you look at my video you will see how I have made a connection to my metal plate. The relevant part begins at about 3mins 30 secs.
Who is online
Users browsing this forum: ClaudeBot and 0 guests