Over the past 3 weeks I have had a couple of excursions into buying a replacement for an old desktop light.
First try was from Amazon - £61 for a PureLight 3 in one lamp, could stand on the floor or be clamped somewhere, lots of very positive reviews. Had to send it back on safety grounds, the main switch was leaky, I could switch it off and the light would come back dimly. It was all right when switched off at the wall though. All credit to Amazon - they refunded very quickly.
Second try was from Coopers of Stortford. The lamp looked good, but the 3-pin plug would not go in any socket in the house (all right I didn't check every single one).
The 3 pin plug does not conform to BS1363. The earth pin is too wide at 4.6 mm, it must be between 3.90 and 4.05 mm. I am reluctant to file it down - its a safety thing again!
So this also will be on its way very shortly.
So, any recommendations from this esteemed group would be welcome.
John
Desk Top Magnifier and Light (LED)
-
- Posts: 809
- Joined: Wed Jul 02, 2008 6:39 pm
Desk Top Magnifier and Light (LED)
Slaving away still on GCR stuff ...
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Desk Top Magnifier and Light (LED)
I bought standard LED bulbs that fitted standard SBC holders. 6000k, so good colour.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 911
- Joined: Sun Mar 27, 2011 6:40 pm
Re: Desk Top Magnifier and Light (LED)
Recently I've switched from a light-and-magnifier combination on a desk mount to a headband magnifier and separate light. This works much better for me, and gives a wider choice of lamps.
-
- Forum Team
- Posts: 3923
- Joined: Sun Jun 29, 2008 8:02 pm
Re: Desk Top Magnifier and Light (LED)
-
- Posts: 825
- Joined: Fri Jul 15, 2011 11:09 pm
Re: Desk Top Magnifier and Light (LED)
I recently bought a Daylight 32500 Triple Bright Fluorescent Lamp http://www.daylight-lamps.co.uk/lamps-daylight/daylight-desk-table-lamps/daylight-triple-bright-fluorescent-lamp-d32500. Daylight's own website is currently offering them at £124.99 but I was able to buy one from Sewandsew for £79.20.
I had been thinking in terms of getting a replacement for my magnifying lamp, the plastic in which is crumbling to dust due to the heat radiated from its incandescent bulb. However, what seemed like exhaustive research didn't reveal a lamp/magnifier combination with which I was entirely happy. Whilst watching a TV programme on a firm of jewellers (Boodle's?), I noticed that their workshop was equipped with Daylight 32500's or something very similar. This led me to conclude that the reason I was dissatisfied with the lamp/magnifier combinations I had seen was that they represented a compromise: they were neither the best magnifier available nor the best source of illumination for my worktop. So I decided to forego the magnification capability and concentrate on getting the best lighting I could. Daylight brand lamps seem to be a high quality product and I am more than pleased with the choice I made.
When placing my order with Sewandsew I took the opportunity to pick up a cheap and cheerful clip-on LED lamp with flexible stem (http://www.sewandso.co.uk/Products/XtraFlex-Craft-Light---Silver__MTB-60432.aspx). Although this could do with being a bit brighter, I've clipped it onto my Unimat's motor mounting plate found it invaluable to be able to manouevre the light into very close proximity to the attachment holding the piece I'm working on.
I had been thinking in terms of getting a replacement for my magnifying lamp, the plastic in which is crumbling to dust due to the heat radiated from its incandescent bulb. However, what seemed like exhaustive research didn't reveal a lamp/magnifier combination with which I was entirely happy. Whilst watching a TV programme on a firm of jewellers (Boodle's?), I noticed that their workshop was equipped with Daylight 32500's or something very similar. This led me to conclude that the reason I was dissatisfied with the lamp/magnifier combinations I had seen was that they represented a compromise: they were neither the best magnifier available nor the best source of illumination for my worktop. So I decided to forego the magnification capability and concentrate on getting the best lighting I could. Daylight brand lamps seem to be a high quality product and I am more than pleased with the choice I made.
When placing my order with Sewandsew I took the opportunity to pick up a cheap and cheerful clip-on LED lamp with flexible stem (http://www.sewandso.co.uk/Products/XtraFlex-Craft-Light---Silver__MTB-60432.aspx). Although this could do with being a bit brighter, I've clipped it onto my Unimat's motor mounting plate found it invaluable to be able to manouevre the light into very close proximity to the attachment holding the piece I'm working on.
-
- Posts: 35
- Joined: Fri Oct 23, 2009 7:38 pm
Re: Desk Top Magnifier and Light (LED)
A suggestion I have not yet tried:
From IKEA, a FOTO Pendant lamp, aluminium (001.258.11), £12, fitted to the ceiling with up to 1.6m drop, ES fitting
and from Homebase, TCP CFL Spiral Daylight Bulb 23w ES - 1 Pack (550183), £6.99
Two of those over a workbench giving the equivalent of 210W of lighting at 6500K. I use a headband magnifier.
Dave Harvey
From IKEA, a FOTO Pendant lamp, aluminium (001.258.11), £12, fitted to the ceiling with up to 1.6m drop, ES fitting
and from Homebase, TCP CFL Spiral Daylight Bulb 23w ES - 1 Pack (550183), £6.99
Two of those over a workbench giving the equivalent of 210W of lighting at 6500K. I use a headband magnifier.
Dave Harvey
Return to “Tools and Techniques”
Who is online
Users browsing this forum: ClaudeBot and 0 guests