Types of points
-
- Posts: 95
- Joined: Sun Dec 17, 2017 8:49 pm
Types of points
Can anyone advise the differences between type A, B, C and D points other than dimensions?
-
- Posts: 2192
- Joined: Wed Jul 30, 2008 5:56 pm
Re: Types of points
Basically the letters A, B, C, D refer to the planing length of the switch blades.
-
- Forum Team
- Posts: 3923
- Joined: Sun Jun 29, 2008 8:02 pm
Re: Types of points
The difference is in the dimensions.
However that difference results in different allowable maximum speeds over the diverging track, the speed increasing with increasing radius which relates to the switch designation.
A switches are the smallest radius and hence lowest speed, of use only in shunting yards and similar.
B can be used in cramped locations with a speed limit around 15 mph
C and D are fairly common values for main line track
E and F can be used for higher speed junctions, approx 60 and 75 mph respectively
G, H and J come int use for really high speeds.
Full data can be had from the Network Rail track handbooks.
Info on the older GWR and BR(W) is available here http://www.norgrove.me.uk/permanent_way_notes.htm
Regards
However that difference results in different allowable maximum speeds over the diverging track, the speed increasing with increasing radius which relates to the switch designation.
A switches are the smallest radius and hence lowest speed, of use only in shunting yards and similar.
B can be used in cramped locations with a speed limit around 15 mph
C and D are fairly common values for main line track
E and F can be used for higher speed junctions, approx 60 and 75 mph respectively
G, H and J come int use for really high speeds.
Full data can be had from the Network Rail track handbooks.
Info on the older GWR and BR(W) is available here http://www.norgrove.me.uk/permanent_way_notes.htm
Regards
-
- Posts: 5
- Joined: Mon Nov 05, 2012 12:31 pm
Re: Types of points
The attached file is a table for CEN56 turnouts taken from the NR Track Design Handbook. CEN56 is still commonly referred to as 113 lb by some of us older folk and is one of the common modern flatbottomed rail types. The other is NR60 which is even heavier and is used on lines with higher speeds/lots of traffic. Many turnouts these days are DV, EV and FV switches - the higher speed turnouts are much rarer but do exist. For instance Aynho Junction is 90 mph throughout.
You do not have the required permissions to view the files attached to this post.
Return to “Track and Turnouts”
Who is online
Users browsing this forum: ClaudeBot and 0 guests