Hi guys
I am going to try and build a small laout using the P4 flexi track, I like watching trains go round (tail chaser) and plan on having a small station on an oval of track.
I am thinking 1000mm bends is that about correct? Is ther anything along the lines of tracksettas for P4 track?
David
Oval
-
- Posts: 2189
- Joined: Wed Jul 30, 2008 5:56 pm
Re: Oval
Depends on your couplings and the size of the stock. 1000 mm will work in p4 but it won't look good. I'd say 2000mm as a minimum for visible track but even then it's tight.
HTH
Jim
HTH
Jim
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Oval
1000mm is cutting it fine. Recommended is 1200mm. OK, so I have used 920mm, but I was building stock to fit on it.
There is no Tracksetta for 18.83, you could use a trammel to set the curves out.
There is no Tracksetta for 18.83, you could use a trammel to set the curves out.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
Return to “Track and Turnouts”
Who is online
Users browsing this forum: ClaudeBot and 1 guest