Filing jigs for vee rails are expensive -- but not if 3D printed. Using toughened PLA polymer they would last for several vees, but if it gets too worn you would just print a new one. This filing jig cost 86p:
More info and download STL files if anyone wants to try this:
https://85a.uk/templot/club/index.php?t ... inted.226/
cheers,
Martin.
Rail filing jigs - 3D printed
-
- Posts: 1172
- Joined: Mon May 14, 2012 4:27 pm
Rail filing jigs - 3D printed
40+ years developing Templot. Enjoy using Templot? Join Templot Club. Be a Templot supporter.
-
- Forum Team
- Posts: 2427
- Joined: Sun Jul 27, 2008 7:46 am
Re: Rail filing jigs - 3D printed
Martin Wynne wrote: This filing jig cost 86p:
Is that the cost to make, or the retail selling price?
Terry Bendall
-
- Posts: 1172
- Joined: Mon May 14, 2012 4:27 pm
Re: Rail filing jigs - 3D printed
Terry Bendall wrote:Martin Wynne wrote: This filing jig cost 86p:
Is that the cost to make, or the retail selling price?
Hi Terry,
??? I'm not selling anything.
Templot generates the STL file. Templot is free. The file is free. Unless you want to claim copyright on it, in which case I charge a million pounds.
Over to you to make it on your 3D filament printer. Or a friend's printer. Or a club's printer. Or pay a firm to make it for you.
On my machine the total material cost was 86p. Plus a bit for the electricity to melt about 45 grams of PLA polymer. It also needs a couple of M6 bolts.
cheers,
Martin.
40+ years developing Templot. Enjoy using Templot? Join Templot Club. Be a Templot supporter.
-
- Posts: 2527
- Joined: Sun Jul 20, 2008 3:54 pm
Re: Rail filing jigs - 3D printed
Martin Wynne wrote: Using toughened PLA polymer they would last for several vees, but if it gets too worn you would just print a new one.
Add a couple of groves along the top edge a good tight to hold say 20though piano wire flush with top surface and I suspect it will last a lifetime.
-
- Posts: 1172
- Joined: Mon May 14, 2012 4:27 pm
Re: Rail filing jigs - 3D printed
Will L wrote:Add a couple of groves along the top edge a good tight to hold say 20thou piano wire flush with top surface and I suspect it will last a lifetime.
Hi Will,
But how long will the file last? A good file is much more valuable than a disposable jig.
Martin.
40+ years developing Templot. Enjoy using Templot? Join Templot Club. Be a Templot supporter.
-
- Posts: 2527
- Joined: Sun Jul 20, 2008 3:54 pm
Re: Rail filing jigs - 3D printed
Martin Wynne wrote:Will L wrote:Add a couple of groves along the top edge a good tight to hold say 20thou piano wire flush with top surface and I suspect it will last a lifetime.
Hi Will,
But how long will the file last? A good file is much more valuable than a disposable jig.
Martin.
No worse than using a hardened steel jig surely Martin?
-
- Posts: 1172
- Joined: Mon May 14, 2012 4:27 pm
Re: Rail filing jigs - 3D printed
40+ years developing Templot. Enjoy using Templot? Join Templot Club. Be a Templot supporter.
-
- Posts: 899
- Joined: Tue Dec 02, 2008 11:24 pm
Re: Rail filing jigs - 3D printed
Will L wrote:No worse than using a hardened steel jig surely Martin?
The hardened steel jigs are a very fine way of blunting a file! I have a couple of files I dedicate to them for this reason (and because they go blunt, using them becomes progressively harder).
So I will be up for some of these when I next build track. I would have thought that you can keep the jig true for a while longer than martin says as whilst the head may well get abraded being a fairly soft material, it is the angle of this face to the rail protrusion that is of interest, not the face per say.
Mark Tatlow
-
- Posts: 2527
- Joined: Sun Jul 20, 2008 3:54 pm
Re: Rail filing jigs - 3D printed
Mark Tatlow wrote:Will L wrote:No worse than using a hardened steel jig surely Martin?
The hardened steel jigs are a very fine way of blunting a file! I have a couple of files I dedicate to them for this reason (and because they go blunt, using them becomes progressively harder).
...
Or perhaps rather better, as the file may blunt down the sides where it slides over the wires, but not so much in the centre where you want it to cut the rail.
-
- Posts: 1172
- Joined: Mon May 14, 2012 4:27 pm
Re: Rail filing jigs - 3D printed
Will L wrote:Or perhaps rather better, as the file may blunt down the sides where it slides over the wires, but not so much in the centre where you want it to cut the rail.
Hi Will,
But I don't want to blunt it at all -- it's used for other jobs too. I would rather just print a new jig if necessary.
cheers,
Martin.
40+ years developing Templot. Enjoy using Templot? Join Templot Club. Be a Templot supporter.
-
- Posts: 141
- Joined: Thu Dec 04, 2008 9:24 am
Re: Rail filing jigs - 3D printed
Martin
While I am a user of the hardened steel jigs, I welcome your initiative as it, hopefully, opens the door to an economical way of obtaining and using filing jigs which I have found extremely useful.
More power to your elbow.
Jim P
While I am a user of the hardened steel jigs, I welcome your initiative as it, hopefully, opens the door to an economical way of obtaining and using filing jigs which I have found extremely useful.
More power to your elbow.
Jim P
Return to “Track and Turnouts”
Who is online
Users browsing this forum: ClaudeBot and 3 guests