Crewe Area Group - online meetings

Moderator: Will L

User avatar
Will L
Posts: 1930
Joined: Sun Jul 20, 2008 3:54 pm

Crewe Area Group - online meetings

Postby Will L » Sun Nov 08, 2020 7:41 pm

Sunday 8/1/2020

As it has become clear that it will be a while before we are able to start face to face meetings again, CAG has at last bitten the bullet and gone Virtual.

Using Zoom we held our first online meeting in our traditional meeting slot (14:00 on the first Sunday of the month) and it was well received. 8 members attended the meeting, although one had technical issues and had to retire from the fray early. The remaining 7 had a good catch up chat which lasted comfortably for 2 1/2 hours despite the organiser (wonder who that was) having shamefully failed to provide an agenda.

It was sad not to have Ron Dickinson with us as, regrettably, he reached his final destination on the 10th of June. Given the times, we were not able to attend the funeral on mass but fortunately it was possible for us to be represented. Fittingly, Ron had asked that any donations in his memory should go to the LMS Patriot Projects. Therefor we will have our own reasons for remembrance when we get to see the loco in action. Perhaps we should get a rivet suitably inscribed! Ron was a fine modeller and a good friend, we will miss him.

Our Zoom talk ranged over many topics, some even related to model railways. Zoom often gives you unexpected insights into other people’s homes, it amazing how may choose to sit in front of a bookcase, but those who caught up with Jeremy in his workshop during the Virtual Scaleforum will recognise where we found him. We had the advantage of being able to talk to him direct and discuss the turning techniques he has been so ably describing elsewhere on the forum. He told us how many locos he thinks he has produced over the years, and it does rather put my spending over 5 years to produce two to shame. When not discussing the availability of replacement irons for Antex soldering stations or the merits of the wire wool style of soldering iron bit cleaners. we did consider, among other things, the best way to model boiler bands and whether the chimney on one of my Buckjumpers was on strait (it is, whatever it looks like in the photograph). I think we enjoyed ourselves.

The upshot is that we are now planning to make this a regular event. There will be changes, given that there will be no need to drive anywhere, the meetings times will change, probably becoming an evening event and not necessarily on a Sunday. It was also agreed that we should publicise these events here and say we would be happy to include others, who live in our area or have other connections to the group, who would like to attend in future. Anybody who would like to take up this invite should send me a PM either over the forum or by email on Crewe@Scalefour.org

User avatar
Will L
Posts: 1930
Joined: Sun Jul 20, 2008 3:54 pm

Crewe Area Group - online meetings 13/12/2020

Postby Will L » Sat Dec 19, 2020 3:35 pm

Monday 13th December 2020

Nine of the Crewe Area Group, including a past member living in Aberdeen (Peter H) and potential new member (Peter M) enjoyed a good Zoom session last Monday night.

Given his new railway room is now available, David B has been in layout planning mode. He talked through his thinking on fiddle yards. This included the interesting discovery of just how much length is needed for the points to connect together a fan of 12 fiddle yard sidings. This has caused him to reconsider exactly how his fiddle yard was going to work, and a number of possibilities were discussed. They are influenced by the fact that his prototype sits at the bottom of a bank which has a significant affect on the train formations going up the bank as compared to those which come down. Hopefully the whole experience has advanced his thinking.

After the intermission caused by our dependence on a Free Zoom account, the rest of the meeting discussed a variety of topics such as the various sorts of self-etch primer; the advantages of modelling in nickel silver rather than brass, the desirability and possibility of modelling inside valve gear; and even an apparent historic variation in cut ply sleeper lengths. However, I was involved in a rather poorly timed (not my choice) phone call discussing (successfully) a consumer issue. Hence I wasn’t necessarily taking a lot of notice, missed a few things and certainly can't do justice to what was discussed. I wasn’t the only one as Jeremy took a stores phone order during the meeting.

The meeting was enjoyed by all, as far as I can tell, and we will continue to hold monthly meetings on the second Monday each month at 19:30. Anybody who feels they might like to be a member of the Crewe Area Group, should contact me.


Return to “Crewe (CAG)”

Who is online

Users browsing this forum: No registered users and 1 guest