Hi all,
I'm hoping for a little bit of help with some exactoscale transfer boxes. I've managed to get hold of a couple of the 1:1 and 2:1 boxes of the newer type (4GB 110A and 4GB 113A) but appear to be missing some parts.
Has anybody got a copy of the instructions for either I could see?
Many thanks for any help.
Sam
Exactoscale transfer boxes.
-
- Forum Team
- Posts: 3923
- Joined: Sun Jun 29, 2008 8:02 pm
Re: Exactoscale transfer boxes.
I would also like instructions, I'm sure I had some once! But I do have some parts so can probably help if you can work out what's missing.
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Exactoscale transfer boxes.
Any good?
You do not have the required permissions to view the files attached to this post.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Forum Team
- Posts: 3923
- Joined: Sun Jun 29, 2008 8:02 pm
Re: Exactoscale transfer boxes.
Ah,
The really new type, my bits are the Bernard era mark 2.
The really new type, my bits are the Bernard era mark 2.
-
- Posts: 23
- Joined: Sat Feb 06, 2016 2:03 am
Re: Exactoscale transfer boxes.
Keith, Tim, thanks for your help. Looks like I'm missing the input shaft bearings from all the boxes! Hopefully I'll be able to turn something up to do the job.
Cheers!
Sam
Cheers!
Sam
-
- Posts: 56
- Joined: Sat Jul 26, 2008 1:12 pm
Re: Exactoscale transfer boxes.
This is an earlier version.
Not very clear, but hope of some use.
Not very clear, but hope of some use.
You do not have the required permissions to view the files attached to this post.
Andy Westcott
-
- Forum Team
- Posts: 3923
- Joined: Sun Jun 29, 2008 8:02 pm
Re: Exactoscale transfer boxes.
Thanks Andy, that will help me sort out the bits I have.
-
- Posts: 132
- Joined: Wed Apr 11, 2012 4:55 pm
Re: Exactoscale transfer boxes.
sam.makins wrote:
(4GB 110A and 4GB 113A)
Has anybody got a copy of the instructions for either I could see?
Late to the party as ever. Are these any help? If the Exactoscale pdfs are hard to get hold of perhaps someone in the society can archive them in an appropriate location.
P
You do not have the required permissions to view the files attached to this post.
Return to “Product Information”
Who is online
Users browsing this forum: ClaudeBot and 1 guest