Welcome to our latest newsletter. Since our last newsletter, we have been very busy responding to customer requests, adding new products and improving the website.
We hope you are all keeping well and looking forward to the summer.
We will not be closing during the summer and anticipate normal service at all times.
We are pleased to announce that we have just accepted an invita tion to Wells Town Hall on 4th November, more details to follow. This will be a skill training day for all 4mm modellers as well as the AGM of the EM Gauge Society. The training and sales area will open be for all visitors, and not restricted to members. As always with Wells, there is an outdoor market in the square outside the Town Hall, so plenty for the other half to do.
We will also be at Crewe on the same weekend so pre-orders are strongly advised for both events. This will be our first visit so we will see how it goes.
Expo EM North has developed into a nice show, it hasbeen at different venues over the years. This year it is back to Partington, the same venue as 2015 (9/10 September to be confirmed).
The Wigan Show will be 1 week earlier than last year. This year it is on 30 September & 1 October 2017 to avoid a clash with Great Electric Train Show (Gaydon).
A list of exhibitions we will attend in the next few months are shown at the end of this newsletter, and the latest information is as always on our website: http://www.eileensemporium.com
Lots of new products are now in stock:
4mm and 7mm Etched Chequer Plate in the Bill Bedford range.
Rubberised Abrasive Blocks in 30, 60, 120 and 240 grit.
Modelcraft Flexible Sanding Sticks.
More tools From Expom including Tube Bender, Tube Cutting Guide, Drill Press, Drill Press Vice, Swivel Head Vice, Spare bits for Low Temperature Solder Station, PVA and Fast Acting PVA adhesives, Master Cut from Amati, Expo Paint Stripper and Expo Card Glue.
We now have Gaugemaster as a supplier. We are stocking Point Motors from the Seep and DCC Concepts ranges and other items such as Kadee Couplers, Modroc, DCC Concepts Back to Back Gauges and Pattern Makers Dowels. We have listed many Gaugemaster Controllers and put them on the website at a discount to compensate customers for the fact that they are not in stock and there may be a 2 week delay in delivery (subject to availability at Gaugemaster). If there are any Gaugemaster, DCC Concepts or Kadee products required that we do not list please ask for a quote.
Supplies of Ballast for N, 00 and 0 gauge in both Light and Dark Grey have been re-established.
The range of Dormer Branded HSS Drill range has been extended downwards by adding 0.25mm HSS Drills.
Many requests for High Power Magnets are covered with 1mm and 2mm diameter 1mm thick Magnets. Other sizes will be made available on request.
Electrical products now include a selection of 4mm Banana Plugs and Sockets, Slide Switches, 5 Pin Din Plugs and Sockets.
The range of wires continues to increase with more colours and options. We now stock heavy grade DCC bus wire by the yard. We will ship any quantity ordered as a continuous length. We now also have Decoder wiring wire.
We have added Grain or Wheat Bulbs, even smaller Grain of Rice Bulbs, 12V LED's in 3mm and 5mm diameters, all available in several colours. We have aso panel Mount Clips for 3mm and 5mm LED's.
Several more products have been added from the Deluxe range including Living Steam, Solid Water, Aqua Magic, Strip Magic, Brush Magic, Fix 'n Flex, Glue 'n Glaze, Glue Buster, Roket Cyano Hot and Cyano Rapid.
All models of Avonside Chassis2 are in stock.
We have all Hold and Fold except 14" in stock. There has been a delay in manufacture and we are expecting stocks around the end of June to mid August.
We have a special offer valid until the end of June 2017. We are offering 10% off Metal materials. Specifically any product listed under "Metal Sections" or "Metal Sheets, Strips, Flats and Squares" on the products page of the webite. These offers are for retail sales only and are only valid for orders placed before the end of day on Friday 30th June 2017. For all offers please enter JUNEMETAL in the Coupon Box on checkout and do not forget to give the show name for collection in the comment box if appropriate.
Full details of all our other products are on our website.
Derek, Anita, Matt and Judith.
Do not forget that you can beat the queues at shows by pre-ordering through the website. There is a checkout option for this. You can choose to pay through the website or on collection. Please state in the 'Comments' box which show you wish to collect the order from.
Please allow at least 1 week for pre-orders, 2 weeks for Guildex - Telford, Scaleforum, Railex, Expo EM, York and Warley.
A full list of shows is on our website http://www.eileensemporium.com
17/18 June 2017 Scalefour Society AGM - Watford http://www.scalefour.org/calendar
24/25 June 2017 Perth http://www.perthmrc.com
12/13 August 2017 Wells [url]railwells.com/railway-show/railwells-show-2017[/url]
2/3 September 2017 Telford GOG http://www.gauge0guild.com/events/events.aspx
9/10 September 2017 Expo EM North - Manchester Note: Change of venue returning to Partington http://www.emgs.org/events/?event_id1=14
23/24 September 2017 Scaleforum - Aylesbury http://www.scalefour.org/shows/shows.html
30 September/ 1 October 2017 Wigan (Note 1 week earlier than usual) http://www.wiganfrm.org.uk
7/8 October 2017 Hornby Magazine Great Electric Train Show - Gaydon http://www.greatelectrictrainshow.com
14/15 October 2017 Festival of Railway Modelling - Peterborough http://www.world-of-railways.co.uk/shows/show/the-national-festival-of-railway-modelling
28th October 2017 Expo NG - Swanley http://www.expong.org
To Subscribe to recieve future copies of this newsletter please send an email to email@example.com with subscribe in the subject line.
For new product announcements, recommendations, reviews and sourcing. Must be relevant to society members.
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 8 guests