I have just come across this page:
http://boltonsbits.com/7mm%20Etches.htm
On which there is a lever frame intended for 7mm scale. It's described as a "cosmetic/non-working" model of a prototype BR frame, but it looks chunky enough possibly to be made to work in 4mm scale. MDF frames, etched levers, metal rod.
At £1 per lever it is a lot cheaper than other options.
I know no more than what is on that page.
cheers,
Martin.
An Inexpensive Lever Frame?
-
- Posts: 1172
- Joined: Mon May 14, 2012 4:27 pm
An Inexpensive Lever Frame?
40+ years developing Templot. Enjoy using Templot? Join Templot Club. Be a Templot supporter.
-
- Posts: 813
- Joined: Wed Dec 16, 2009 3:47 pm
Re: An Inexpensive Lever Frame?
A little bit further on the same site is another option - it is much more expensive but it is definitely the best available:-
http://boltonsbits.com/Scale%20Signal%20Supply.htm
So there are the two extremes on the same site!
Best Wishes,
Howard
http://boltonsbits.com/Scale%20Signal%20Supply.htm
So there are the two extremes on the same site!
Best Wishes,
Howard
-
- Posts: 1172
- Joined: Mon May 14, 2012 4:27 pm
Re: An Inexpensive Lever Frame?
+1
40+ years developing Templot. Enjoy using Templot? Join Templot Club. Be a Templot supporter.
Return to “Signals and Control Systems”
Who is online
Users browsing this forum: ClaudeBot and 1 guest