Wondering if someone can help.
I have built a MK2 lever frame, (15 levers in fact)fitted with Microswitches.
I have been given a Dapol signal, to use it in an on/off mode as opposed to pulse I have fitted a merg upgrade.
The problem is the normal state (signal at danger) for the merg unit is powered ie with the lever pulled.
Is there a way to change the switch to reverse this.i can't change the polarity of the merg board.
MK2 Lever Frame, microswitch, dapol signal
-
- Posts: 61
- Joined: Thu Sep 04, 2008 3:36 pm
MK2 Lever Frame, microswitch, dapol signal
Regards
Terry
Terry
-
- Posts: 643
- Joined: Sun Jul 20, 2008 4:24 pm
Re: MK2 Lever Frame, microswitch, dapol signal
Then use the other contact on the micro-switch.
regards
Alan
regards
Alan
-
- Posts: 61
- Joined: Thu Sep 04, 2008 3:36 pm
Re: MK2 Lever Frame, microswitch, dapol signal
Thanks very much. It's easy when you know.
Regards
Terry
Terry
Return to “Signals and Control Systems”
Who is online
Users browsing this forum: ClaudeBot and 1 guest