In various discussions about the Society's MkII Lever Frame, people have mentioned that they have difficulty following the instructions to roll the quadrant plate into the correct radius and since this is quite an important aspect, I promised to make a little video to show how it is done. Well, it has taken a while, and it is not very good, but here it is.
I hope that is helpful.
Best Wishes,
Howard
Mk II Lever Frame - Rolling the quadrant plate
-
- Posts: 813
- Joined: Wed Dec 16, 2009 3:47 pm
-
- Posts: 751
- Joined: Mon Jul 21, 2008 8:31 am
Re: Mk II Lever Frame - Rolling the quadrant plate
Doesn't it come out 2.33mm under size by using a Railway Modeller ?
- Nigel
- Nigel
Nigel Cliffe - Blog of various mostly model making topics
Re: Mk II Lever Frame - Rolling the quadrant plate
Well, Howard, that is about 100 times faster than I managed to achieve and with seemingly very little effort. The work of a certain Uri Geller comes to mind...
(Interesting choice of RM by the way. I suspect it is the one with an article scratchbuilding Bulleid 2 HAPs. The editors added some history on HAPs Saps and 4CAPs in the article, then had to print a correction in the next issue, because someone wrote in and complained that only BR HAPs were so classified. The strange thing was, the letter writer was wrong as it turned out!)
(Interesting choice of RM by the way. I suspect it is the one with an article scratchbuilding Bulleid 2 HAPs. The editors added some history on HAPs Saps and 4CAPs in the article, then had to print a correction in the next issue, because someone wrote in and complained that only BR HAPs were so classified. The strange thing was, the letter writer was wrong as it turned out!)
-
- Posts: 813
- Joined: Wed Dec 16, 2009 3:47 pm
Re: Mk II Lever Frame - Rolling the quadrant plate
nigelcliffe wrote:Doesn't it come out 2.33mm under size by using a Railway Modeller ?
- Nigel
Some unkind soul suggested it was the best use for that particular Rag... but see below!
Colin Parks wrote:Well, Howard, that is about 100 times faster than I managed to achieve and with seemingly very little effort. The work of a certain Uri Geller comes to mind...
No phoney illusionism here! Told you it was easy - even in the absence of Will's thigh - it just needs a bit of self confidence.
Colin Parks wrote:(Interesting choice of RM by the way. I suspect it is the one with an article scratchbuilding Bulleid 2 HAPs. The editors added some history on HAPs Saps and 4CAPs in the article, then had to print a correction in the next issue, because someone wrote in and complained that only BR HAPs were so classified. The strange thing was, the letter writer was wrong as it turned out!)
You are quite right - it is that one. I don't often buy the modeller but you provided an excellent reason to buy that one! Seems I should have bought the two subsequent issues as well!
Very Best Wishes,
-
- Posts: 813
- Joined: Wed Dec 16, 2009 3:47 pm
Re: Mk II Lever Frame - Rolling the quadrant plate
nigelcliffe wrote:Doesn't it come out 2.33mm under size by using a Railway Modeller ?
- Nigel
Some unkind soul suggested it was the best use for that particular Rag... but see below!
Colin Parks wrote:Well, Howard, that is about 100 times faster than I managed to achieve and with seemingly very little effort. The work of a certain Uri Geller comes to mind...
No phoney illusionism here! Told you it was easy - even in the absence of Will's thigh - it just needs a bit of self confidence.
Colin Parks wrote:(Interesting choice of RM by the way. I suspect it is the one with an article scratchbuilding Bulleid 2 HAPs. The editors added some history on HAPs Saps and 4CAPs in the article, then had to print a correction in the next issue, because someone wrote in and complained that only BR HAPs were so classified. The strange thing was, the letter writer was wrong as it turned out!)
You are quite right - it is that one. I don't often buy the modeller but you provided an excellent reason to buy that one! Seems I should have bought the two subsequent issues as well!
Very Best Wishes,
Edit:- Colin says "an article" - he wrote it - and first-rate scratchbuilding it is as well.
-
- Posts: 2527
- Joined: Sun Jul 20, 2008 3:54 pm
Re: Mk II Lever Frame - Rolling the quadrant plate
JFS wrote:No phoney illusionism here! Told you it was easy - even in the absence of Will's thigh - it just needs a bit of self confidence.
Exactly
Return to “Signals and Control Systems”
Who is online
Users browsing this forum: ClaudeBot and 2 guests