Mark Tatlow GNR/ECJS twelve wheelers

[Alan Woodard]

Hi Mark.
I noticed that you'v produced a very nice chassis/bogie etch for the GNR/ECJS twelve wheelers. Are you planing to make these available to those who are also in need ? .

Cheers.

Alan Woodard.

[Mark Tatlow]

Alan,

Yes in principal once I have debugged a few points from these.

See comment about "what you get is what you see" in the main thread though!!

Pop me a note via the "contact page" of www.highlandmiscellany.com if you wish, to register interest.

[billbedford]

You might want to note that the GA of the underframe shows only two truss rods, and that the queen posts have struts running from their low end inboard to the underframe cross beams.

[Mark Tatlow]

Thank you to Bill for this and also the supply of the GA for one of the similar vehicles.

A modification is on the way!!

[Alan Woodard]

Hi Mark.

The bogies look great. does Lochgrom kits sell the spring/axle box castings separate? if so do you know the part number. I had a look on there site but could only find two bogie kits.

Cheers.

Alan.