Ready-made wire tree armatures

For general building and scenery topics that are not in the other two subforums.
User avatar
barhamd
Posts: 104
Joined: Sun Jul 20, 2008 2:45 pm

Ready-made wire tree armatures

Postby barhamd » Mon Mar 25, 2019 12:12 am

I thought folks might like to see my progress with product I'd not come across before. Model Scenery Supplies sell a packet of tree armatures under the brand name 'Footpath'. These seemed good value to me at £9.85 for 5 armatures about 140mm tall.

As supplied they are a little squashed together in the packet, the wire is well twisted, but on the recommendation of MSS I applied a little solder to the major joints just to stop them unwrapping.

IMG_6953a.jpg


The wire is quite robust but nowhere near as painful on the fingers as picture wire or brake cable. I found that a little extra winding is worthwhile at the ends of the branches, this probably took about 5-10 minutes per armature.
IMG_6950a.jpg


I've added some bark (sorry I don't know the source, it was just a plastic bag in my scenics box labelled 'bark'!. I mixed whatever this was with some PVA and painted it on in a number of layers.
IMG_6956a.jpg


I'm quite pleased with the results, thought I'd share..

David

User avatar
Hardwicke
Posts: 662
Joined: Sun Sep 14, 2008 10:25 pm

Re: Ready-made wire tree armatures

Postby Hardwicke » Mon Mar 25, 2019 12:59 am

I can see some will like this but following the advice from the late, great, George Iliffe Stokes I'll stick to brake cable thrown into a fire to soften and remove the oil. Free. A smear of pva on fingers protects them.
Builder of Forge Mill Sidings, Kirkcliffe Coking Plant, Swanage and Heaby. Still trying to "Keep the Balance".

User avatar
Tim V
Posts: 2247
Joined: Tue Jul 29, 2008 4:40 pm

Re: Ready-made wire tree armatures

Postby Tim V » Mon Mar 25, 2019 5:38 pm

But if these kits get you making trees, that's a Good thing :D
Tim V
Scalefour News Editor

User avatar
Noel
Posts: 1130
Joined: Wed Jun 23, 2010 1:04 pm

Re: Ready-made wire tree armatures

Postby Noel » Mon Mar 25, 2019 6:09 pm

Not if you get leaves on the line...
Regards
Noel

User avatar
Paul Townsend
Posts: 775
Joined: Mon Sep 14, 2009 6:09 pm

Re: Ready-made wire tree armatures

Postby Paul Townsend » Mon Mar 25, 2019 7:03 pm

Noel wrote:Not if you get leaves on the line...


Not a problem for the proper periods to model!


Return to “Materials and Techniques”

Who is online

Users browsing this forum: No registered users and 1 guest