Coronation

If you are making something new or have found something, announce it here.
User avatar
jim s-w
Posts: 1701
Joined: Wed Jul 30, 2008 5:56 pm

Coronation

Postby jim s-w » Sat Jan 02, 2016 9:49 am

Hi all

Not seen this mentioned elsewhere.

http://www.brassmasters.co.uk/coronation.htm

I always said of brassmasters did one I'd have a go at it. :)

Jim

Philbax
Posts: 81
Joined: Tue Sep 22, 2009 11:27 am

Re: Coronation

Postby Philbax » Sat Jan 02, 2016 5:54 pm

I'll join you Jm.
I can see a lot of Martin Finney in the etches, framework to build up the cab roof, fold up base for the footplate.
I haven't seen the etches from the 7mm version from Martin so cannot compare but if this is based on the same etch design it should go together well.
I hope they build one completely before release

I am in the queue for this

Philbax

Tim Easter
Posts: 10
Joined: Sun Feb 02, 2014 4:26 pm

Re: Coronation

Postby Tim Easter » Sun Jan 03, 2016 1:01 am

I think I'll have a go at one of these too... I know it says on the page that the last pair require parts not included in the kit, but I wonder who will be the first to build one of them as such?

Cheers,
Tim

User avatar
Penrhos1920
Posts: 190
Joined: Wed Jul 23, 2008 6:00 pm

Re: Coronation

Postby Penrhos1920 » Wed Jan 06, 2016 12:47 am

Oooh. My favourite. I think I'll buy enough kits to build the whole class of 35.
Getting it Alright

Penrhos Junctions near Caerphilly - Barry Rly, Rhymney Rly and A(N&SW)D&R 1920 and pseudo modern image in S4F
and
Awrhyllgwami for DEMU challenge
and
Dispelling the P4 drop in wheel myth
and
TOERAG Obergruppenführer

User avatar
Craig Warton
Posts: 153
Joined: Sun Jul 20, 2008 7:58 pm

Re: Coronation

Postby Craig Warton » Wed Jan 06, 2016 1:01 am

I purchased one of the Princess kits when that came out and made a comment in the email exchange with John J that if they released a Duchess I would be seriously tempted. When he updated their website with the announcement he sent me an email saying I should have a look at their website.

Suffice to say, I have my name down for one as well.

Craig W

Pannier Tank
Posts: 41
Joined: Sun May 02, 2010 1:11 pm

Re: Coronation

Postby Pannier Tank » Wed Jan 06, 2016 8:29 am

jim s-w wrote:I always said of brassmasters did one I'd have a go at it. :)


46235 City of Birmingham in BR Green Late Crest ??
Regards

David

Tim Easter
Posts: 10
Joined: Sun Feb 02, 2014 4:26 pm

Re: Coronation

Postby Tim Easter » Wed Jan 06, 2016 2:59 pm

Penrhos1920 wrote:I think I'll buy enough kits to build the whole class of 35.


Surely you mean 38? ;)

User avatar
jim s-w
Posts: 1701
Joined: Wed Jul 30, 2008 5:56 pm

Re: Coronation

Postby jim s-w » Wed Jan 06, 2016 8:15 pm

Pannier Tank wrote:
jim s-w wrote:I always said of brassmasters did one I'd have a go at it. :)


46235 City of Birmingham in BR Green Late Crest ??


Could be. But I do like the red ones

dal-t
Posts: 615
Joined: Mon Jan 11, 2010 8:06 pm

Re: Coronation

Postby dal-t » Wed Jan 06, 2016 10:38 pm

Tim Easter wrote:
Penrhos1920 wrote:I think I'll buy enough kits to build the whole class of 35.


Surely you mean 38? ;)


My 1959 ABC certainly says 38 (last of class 46257 City of Salford). It was a class I had 'cleared' in my spotting days, but I think that was after the first couple of withdrawals - I'd have to find my marked-up 1960s Ian Allans to be sure. :mrgreen:
David L-T

User avatar
Horsetan
Posts: 910
Joined: Tue Jul 29, 2008 9:24 am

Re: Coronation

Postby Horsetan » Sat Jan 09, 2016 11:31 pm

Yes, reserved one as well. Hopefully they'll be able to turn out a few more than 40 before the resin mould expires.... And if spare etches / castings become available, I can see a few DJH kits being upgraded.....

Philbax wrote:....I can see a lot of Martin Finney in the etches, framework to build up the cab roof, fold up base for the footplate.
I haven't seen the etches from the 7mm version from Martin so cannot compare but if this is based on the same etch design it should go together well.....


This was a kit that Martin flatly refused to make available in 4mm because he thought the etches alone would be too expensive to produce (that's what he told me at the time, anyway), and he didn't think there'd be many wanting to shell out that kind of money.

Suppose similar reasoning applies to not producing the Bulleid Light Pacific in 4mm.

Penrhos1920 wrote:Oooh. My favourite. I think I'll buy enough kits to build the whole class of 35.


If you're the winner of tonight's £57.8 million Lotto (the winning numbers are all BR diesel classes, BTW), you'll be able to clean Brassmasters' production out several times over.

I can see this kit plus tender breaking £300 before you start shopping for wheels (only Ultrascales are correct) and the rest.

And as for Ultrascale wheels, David Rogers has a large bag full of a couple of hundred axles' worth of P4-profile Duchess driving wheels with steel tyres in stock (I've seen them), so it shouldn't take him six months to get them to you.
That would be an ecumenical matter.

John Fitton

Re: Coronation

Postby John Fitton » Sun Jan 10, 2016 3:26 pm

Tim Easter wrote:
Penrhos1920 wrote:I think I'll buy enough kits to build the whole class of 35.


Surely you mean 38? ;)


There were going to be 42 but the universe ended early...

John F.

User avatar
Penrhos1920
Posts: 190
Joined: Wed Jul 23, 2008 6:00 pm

Re: Coronation

Postby Penrhos1920 » Sun Jan 10, 2016 10:54 pm

Tim Easter wrote:
Penrhos1920 wrote:I think I'll buy enough kits to build the whole class of 35.


Surely you mean 38? ;)

Yes. I meant 36 as the kit won't do the last 2.
Getting it Alright

Penrhos Junctions near Caerphilly - Barry Rly, Rhymney Rly and A(N&SW)D&R 1920 and pseudo modern image in S4F
and
Awrhyllgwami for DEMU challenge
and
Dispelling the P4 drop in wheel myth
and
TOERAG Obergruppenführer

User avatar
Horsetan
Posts: 910
Joined: Tue Jul 29, 2008 9:24 am

Re: Coronation

Postby Horsetan » Mon Jan 18, 2016 10:36 pm

Philbax wrote:....I can see a lot of Martin Finney in the etches, framework to build up the cab roof, fold up base for the footplate.
I haven't seen the etches from the 7mm version from Martin so cannot compare but if this is based on the same etch design ...


I've asked Brassmasters to comment on this point.
That would be an ecumenical matter.

User avatar
Horsetan
Posts: 910
Joined: Tue Jul 29, 2008 9:24 am

Re: Coronation

Postby Horsetan » Wed Jan 20, 2016 11:25 pm

Update:

Further to Phil's observation, here's what Brassmasters wrote -

"...The artwork has been produced by ....Geoff Hurley using AutoCad – Martin did not produce his 7mm kit using CAD but he allowed us to use his GA drawings and design work to help us develop a 4mm kit. So it would be accurate to say that it combines the best of Brassmasters and Finney."

So there you go.
That would be an ecumenical matter.


Return to “New Products”

Who is online

Users browsing this forum: No registered users and 2 guests