SCC - Sparkshot Custom Creations

If you are making something new or have found something, announce it here.
Dave Franks
Posts: 75
Joined: Tue Apr 16, 2019 9:02 am

Re: SCC - Sparkshot Custom Creations

Postby Dave Franks » Fri Sep 27, 2019 4:53 pm

Thought I'd seen that picture before.... Not quite but it did remind me of this.
Caley 812s.jpg
Caley 812s.jpg (48.99 KiB) Viewed 2759 times


Caley Coaches kits, some with new turned chimneys and added extras. Two in OO, one in EM and one in P4 which is pictured on the Caley Coaches website.
Back in the day when I was still able to do these things in batches. :(

The 3D prints are fantastic though, what tenders are you doing to go with them?

Dave Franks
Dave Franks

Wharfeside project:- www.rmweb.co.uk/community/index.php?/to ... s-project/

Lanarkshire Models& Supplies
www.lanarkshiremodels.com

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Fri Sep 27, 2019 8:52 pm

Thanks, the 3000 Gallon one although may do more too.

Caley ones look good, especially in that primer.
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Tue Oct 01, 2019 10:16 am

CR 812 4mm Body Shells: I'm now ready to accept 3D print orders for those whom it may interest. :) Riveted and non riveted, also specify 00, EM or P4 as the cab splashers are set accordingly. Chassis and tenders are still in development but for now the bodies are available. Will finish off the 652 bodies too.

https://twitter.com/KnucklesSCC/status/ ... 2699688961

Image
Image

Quick render for painted impression.
Image


As a reminder: For those of you in various online places who have expressed confusion and wonderment as to why I set out to make the 812 when there is a brass kit and an RTR model coming along;

as said before, ultimately I want to build 4 of these so it's a lot cheaper for me to do my own, on top of that the plan has been in my mind for around a decade so it isn't anything new.

Further more, I can re-scale these up or down if there is any interest so from my perspective it makes perfect sense. :thumb

Note: Considering Dave Bradwell's view on the boiler bands I have reduced them to 0.1mm as seen in the photographs which although a tad over-scale still, are closer than what a lot were, previously at 0.2mm. Making them much smaller will likely render them mushy on the prints.
Last edited by Knuckles on Tue Oct 01, 2019 7:06 pm, edited 1 time in total.
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

Lindsay G
Posts: 167
Joined: Thu Aug 07, 2008 2:16 am

Re: SCC - Sparkshot Custom Creations

Postby Lindsay G » Tue Oct 01, 2019 12:11 pm

I'd limit portrayal to LMS or BR days as round headed rivets, dogs on the smokebox door, and lamp irons (other than on the top of the smokebox and cab sides) were not features in the Caley era.

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Tue Oct 01, 2019 12:56 pm

Yeah I know, this is just a quick render to give an impression, not an attempt to show an accurate combination. You'll also see I didn't finish all the livery details for the same reason. A nice blue and white render looks better than boring black.

The body comes in riveted or non riveted form and there are 3 smokebox types; no lip, lip and lip with dogs as in the render.

Lamp irons are not modelled on the smokebox top as it'd foul the rivets for the printing tolerance thicknesses needed for a resin lamp iron. I'd expect these to be cut off and replaced by etches from most anyway.

I have swapped the safety valve and bunged a number on and painted it black. Again, just for a quick impression.
Image
Image
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

User avatar
Mike Garwood
Posts: 558
Joined: Sun Aug 03, 2008 4:51 pm

Re: SCC - Sparkshot Custom Creations

Postby Mike Garwood » Tue Oct 01, 2019 6:55 pm

Fair play Gav...that looks superb!

Mike

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Tue Oct 01, 2019 7:02 pm

Thanks, Mike.

Apart from a few things I'm still part way designing will be taking a break from new stuff as I am bottle necked with a few half completed 3D print loco's on the desk. Built another HL gearbox today for one. (55 minutes, not bad) Must get them finished. Want some nice new shiny pics and loco's finished fully for the new layout/s. :)

Loft work is still slowly going forward in preparation for the next layouts although at a trickle, roof still leaking although we have almost sorted it.
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Wed Nov 13, 2019 5:23 pm

As well as working on the 812 tender and other bits, also doing a few commissions,

Progress on the USA Scotty is coming along nicely, ultimately it is being done as the client wants a H0 model but it's agreed to release things in 4mm too.

https://twitter.com/KnucklesSCC/status/ ... 7358447618
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Tue Dec 03, 2019 2:26 pm


https://www.shapeways.com/shops/sparksh ... enders&s=0

3.5mm H0 Scotty is released.  4mm one following in a day or two once everything is uploaded.

On the Photon can print everything bar the loco bodies at around 50% of the price although I haven't yet calculated the costs exactly but roughly that.

Loco bodies are a Shapeways only purchase currently due to the Photon being a smaller machine.  Will be buying a 2nd one soon.

 4mm Versions released.
https://www.shapeways.com/shops/sparksh ... enders&s=0

 https://twitter.com/KnucklesSCC/status/1201869233791131650

-

 

Now where is that 812 tender I was working on...and the 2-4-0 Broad Victoria, and the...and the......Yeah.....

 

Need 20 hands. :thumb
Getting there, modelling desk is a bomb site too.

“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Thu Mar 26, 2020 4:55 pm

Caledonian 812 TENDERS now available in 4mm!



Photon 3D Prints for bodies are £32 + postage, chassis Shapeways only (FUD/SFDP) & there are double pack offers for the whole sets too, bit pricey though.



If this interests please share.



For Photon orders email sparkshot082@gmail.com

for everything else

https://www.shapeways.com/shops/sparksh ... ilways&s=0



Image





Also have two Anycubic Photon's now, much easier!
Last edited by Knuckles on Tue Mar 31, 2020 8:27 am, edited 1 time in total.
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Thu Apr 16, 2020 11:52 am

“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

nberrington
Posts: 402
Joined: Thu Dec 04, 2008 2:15 pm

Re: SCC - Sparkshot Custom Creations

Postby nberrington » Thu Apr 16, 2020 12:53 pm

Those look smashing. Decent price here in Canada. I might grab a couple of the Midland wagons.

User avatar
Guy Rixon
Posts: 695
Joined: Sun Mar 27, 2011 6:40 pm

Re: SCC - Sparkshot Custom Creations

Postby Guy Rixon » Thu Apr 16, 2020 12:59 pm

Do you have photos of the wagon prints?

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Thu Apr 16, 2020 1:47 pm

I got some photo's of the S scale prints in FUD/SFDP.

Printed some on the Photon too although I'm not entirely happy with the anoying line that insists on forming on these wagons when printed on Photon which is why for now they are just on Shapeways.

Will upload in 5 or so minutes.
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Thu Apr 16, 2020 2:12 pm

These are the S scale ones in Shapeways FXD/SFDP

Image
Image
Image
Image

Image
Image
Image
Image

Image
Image
Image

Image
Image
Image
Image
Image

This last one is also S scale but the one below is a Photon print that after a wee rub slapped some paint on.
Image

Photon Prints, can't remember if 4mm or S although the results are almost identical, they turn out pretty good although they sometimes have an annoying line on the side that needs rubbing out. Happens a lot with large flat panels, not so bad if the panel is big but with plank detail a bit awkward. Can print them if it interests though.

Image
Image
Image
Image
Last edited by Knuckles on Thu Apr 16, 2020 11:58 pm, edited 1 time in total.
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

nberrington
Posts: 402
Joined: Thu Dec 04, 2008 2:15 pm

Re: SCC - Sparkshot Custom Creations

Postby nberrington » Thu Apr 16, 2020 4:16 pm

Ah, the loathsome fibreglass brush.....

User avatar
Guy Rixon
Posts: 695
Joined: Sun Mar 27, 2011 6:40 pm

Re: SCC - Sparkshot Custom Creations

Postby Guy Rixon » Thu Apr 16, 2020 7:26 pm

Thanks. So it looks like you have patterning on the sides of the SW prints, but not so much on the ends? That's what I was expecting.

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Thu Apr 16, 2020 7:53 pm

Cleaning up 3D prints in areas is fairly normal though. Until we get to injection moulded quality it'll be the norm.

Those pics are from 2018 so modern prints might be different now. It's the usual orientation factor no doubt.

It's the 3 plank that looks the worst there. Bit of a scrub would sort it.

As FXD/SFDP prints go these are some of the best I've seen.

What concerns you here?
Last edited by Knuckles on Thu Apr 16, 2020 11:57 pm, edited 1 time in total.
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

Tony Wilkins
Posts: 381
Joined: Tue Mar 20, 2012 3:57 pm

Re: SCC - Sparkshot Custom Creations

Postby Tony Wilkins » Thu Apr 16, 2020 9:28 pm

I have to say that I am quite impressed with the results. The S scale wagons look particularly good, but the translucent material reminds me of some ancient ERG kits for LNER riveted mineral wagons that I once built and needed several layers of paint to hide the see through look.
Regards
Tony.

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Fri Apr 17, 2020 12:40 pm

They also have a rather interesting Marzipan onk to them when new. :D


Regarding the 4 recently uploaded wagons, I've been talking in PM to Compound2632 on RMweb who's very kindly spend considerable time unearthing some extra information.  Based on that, with these two....



https://www.shapeways.com/product/PKHMJ ... 7&li=shops

https://www.shapeways.com/product/N5QUS ... 9&li=shops



I've added the following notes to the descriptions:



Notes: These 4mm ones have been altered slightly from the initial CADs in that the number plates always appear on the right hand side as you observe the wagon.  Some details had to be thickened slightly or left out entirely due to 3D printing tolerances and design choices of over-scale visibility when the commission was taking place. 
Also some of the inside bolts that would be countersunk have been made as protrusions so there is at least some representation of visibility, feel free to file them off.
Normal concessions although feel free to view the CAD in the 3D viewer, top right of the images.
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

User avatar
Guy Rixon
Posts: 695
Joined: Sun Mar 27, 2011 6:40 pm

Re: SCC - Sparkshot Custom Creations

Postby Guy Rixon » Fri Apr 17, 2020 5:41 pm

Knuckles wrote:Cleaning up 3D prints in areas is fairly normal though. Until we get to injection moulded quality it'll be the norm.

Those pics are from 2018 so modern prints might be different now. It's the usual orientation factor no doubt.

It's the 3 plank that looks the worst there. Bit of a scrub would sort it.

As FXD/SFDP prints go these are some of the best I've seen.

What concerns you here?


I agree that they came out very well for SFDP. I'm not criticising them. What I'm after is hints on whether it's now safe to model vehicles with vertical sides at SW, or whether they need to be flat-packed, as I've been assuming. I'm encouraged by your results, but I think it's a change in degree, not a complete change in process as the patterning can still just be seen.

Knuckles
Posts: 1222
Joined: Fri Nov 18, 2011 9:15 pm

Re: SCC - Sparkshot Custom Creations

Postby Knuckles » Fri Apr 17, 2020 7:01 pm

Ok, thanks for clarifying. :thumb
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320


Return to “New Products”

Who is online

Users browsing this forum: No registered users and 1 guest