PenBits Sprung Bogies for Heljan 26/27/33

If you are making something new or have found something, announce it here.
User avatar
ianpenberth
Posts: 42
Joined: Wed Dec 29, 2010 6:25 pm

PenBits Sprung Bogies for Heljan 26/27/33

Postby ianpenberth » Tue Mar 03, 2015 4:43 pm

PenBits sprung bogie kits now in stock for the Heljan Classes 26, 27 and 33, aka BRCW Type 2s and 3s. For one reason and another these have been a little while in production, so I'm very pleased to finally have them on the books.

I have included quite a lot of detail parts on these etches as much is either missing or in the wrong place on the originals. The kits can be built up fairly quickly into functioning units, the details take a little more time and can be added either as you go or later on at your leisure.

There are two kits, one for the Type 2s and one for the Type 3s, based on the same basic subframe with different detail bits.

A couple of photos here, more details on the PenBits website: http://www.penbits.co.uk.

IMG_4199_w800.jpg
Kit components and wheelsets
IMG_4199_w800.jpg (160.46 KiB) Viewed 1651 times


IMG_4207_w800.jpg
Kit with Heljan drive units and sideframes fitted
IMG_4207_w800.jpg (167.86 KiB) Viewed 1651 times
Ian
PenBits Model Railways - Diesel bogie springing and detailing

shipbadger
Posts: 117
Joined: Sun Jul 20, 2008 3:00 pm

Re: PenBits Sprung Bogies for Heljan 26/27/33

Postby shipbadger » Tue Mar 03, 2015 4:46 pm

Ian,

Will you have these with you at Newport on Saturday?

Tony Comber

User avatar
ianpenberth
Posts: 42
Joined: Wed Dec 29, 2010 6:25 pm

Re: PenBits Sprung Bogies for Heljan 26/27/33

Postby ianpenberth » Tue Mar 03, 2015 5:14 pm

Tony,

Yes but not very many as travelling light. Let me know if you'd like me to put one aside for you.

Cheers
Ian
PenBits Model Railways - Diesel bogie springing and detailing


Return to “New Products”

Who is online

Users browsing this forum: No registered users and 1 guest