Evening all,
Does anyone have an photo's of Masokits 10.01 Standard Gangway Unit, specially made into the GWR Bracket hung type?
Debating an order.
Regards
Masokits 10.01 Standard Gangway Unit
-
- Posts: 111
- Joined: Wed Jun 13, 2012 10:15 am
Masokits 10.01 Standard Gangway Unit
Matt Rogers
-
- Posts: 1371
- Joined: Tue Jul 29, 2008 9:24 am
Re: Masokits 10.01 Standard Gangway Unit
ClikC wrote:....Does anyone have an photo's of Masokits 10.01 Standard Gangway Unit, specially made into the GWR Bracket hung type?...
No, but took delivery of a pack of four sets of the things yesterday, for experimental use on Collett coaches....
That would be an ecumenical matter.
-
- Posts: 323
- Joined: Sat Jan 02, 2010 5:04 pm
Re: Masokits 10.01 Standard Gangway Unit
Hi Matt,
If you have access to a collection of MRJs there are some pictures of completed and painted Masokits gangways made up into this type on Gerry Beale's bow ended coaches that were featured in numbers 247 and 258.
Justin
If you have access to a collection of MRJs there are some pictures of completed and painted Masokits gangways made up into this type on Gerry Beale's bow ended coaches that were featured in numbers 247 and 258.
Justin
-
- Posts: 111
- Joined: Wed Jun 13, 2012 10:15 am
Re: Masokits 10.01 Standard Gangway Unit
Horsetan wrote:No, but took delivery of a pack of four sets of the things yesterday, for experimental use on Collett coaches....
Hi Ivan, I'm hoping they'll be a bit more finescale than the rubber ones on the new Accurascale Siphon G's.
jjnewitt wrote:Hi Matt,
If you have access to a collection of MRJs there are some pictures of completed and painted Masokits gangways made up into this type on Gerry Beale's bow ended coaches that were featured in numbers 247 and 258.
Justin
Hi Justin,
Alas not being a member of a club anymore I've lot out on access to a complete set of MRJs, but I'll take a look at obtaining the those publications, thanks for the tip!
Regards
Matt
Matt Rogers
-
- Forum Team
- Posts: 3918
- Joined: Sun Jun 29, 2008 8:02 pm
Re: Masokits 10.01 Standard Gangway Unit
jjnewitt wrote:Hi Matt,
If you have access to a collection of MRJs there are some pictures of completed and painted Masokits gangways made up into this type on Gerry Beale's bow ended coaches that were featured in numbers 247 and 258.
Justin
Its 247 you want for this, 258 just has one extra pic which does not show any more of the gangway than those in 247.
-
- Posts: 1371
- Joined: Tue Jul 29, 2008 9:24 am
Re: Masokits 10.01 Standard Gangway Unit
ClikC wrote:Horsetan wrote:No, but took delivery of a pack of four sets of the things yesterday, for experimental use on Collett coaches....
Hi Ivan, I'm hoping they'll be a bit more finescale than the rubber ones on the new Accurascale Siphon G's.
I'm not sure that you can make a rubber moulding finer past a certain point. The Masokits unit will always have the advantage.
That would be an ecumenical matter.
-
- Posts: 2186
- Joined: Wed Jul 30, 2008 5:56 pm
-
- Posts: 111
- Joined: Wed Jun 13, 2012 10:15 am
Re: Masokits 10.01 Standard Gangway Unit
Hi Jim,
Close, but slightly different for the particular prototype, I'm satisfied they would make a big difference to the Accurascale Siphon G's.
Regards
Matt
Matt Rogers
-
- Posts: 69
- Joined: Tue Jun 20, 2023 4:04 am
Re: Masokits 10.01 Standard Gangway Unit
following this with interest as I've got a few old Mainline Collett coaches at home that will be on the upgrade table once i return to the UK, and very close to making an order with accurascale for a siphon too... all very tempting. Looking forward to progress updates on both.
Yours aye,
James
James
Who is online
Users browsing this forum: ClaudeBot and 0 guests