Hornby Brighton Belle conversion.
Posted: Mon Feb 18, 2013 9:17 am
P4ing looks to be a reasonably straightforward job. The fore and aft stretcher bars and the four centre brackets will have to be cut and spaced outwards.
Some more checking of the trailer car wheelsets will be necessary, as they at first seemed OK.
This was acquired as an experiment for the Balcombe 6PUL/6PAN project
Some more checking of the trailer car wheelsets will be necessary, as they at first seemed OK.
This was acquired as an experiment for the Balcombe 6PUL/6PAN project