Starting a new thread hear as it changing the subject from the original
DougN has asked if I have any pictures of NER G6 044t ex BTP tank no 672 withdrawn in 1929.
I only have the 2 pictures of this engine both taken on the same side.
672 York circa 1928
672 Unknown station
Railway Photos
-
- Posts: 360
- Joined: Tue Apr 14, 2009 6:56 pm
Railway Photos
You do not have the required permissions to view the files attached to this post.
Tips and tricks in machine tool practice viewtopic.php?f=132&t=6350
-
- Posts: 1253
- Joined: Wed Sep 01, 2010 9:57 am
Re: Railway Photos
Absolutely Brilliant Jeremy!
These show more details than I was hoping for. Dare I say one that I had not really looked deeply into, the push pull gear to the front/ back bufferbeams. The photos in the RCTS and BRJ 41 both have side on views, the 3/4 view shows the push pull gear mounted through the buffer beam.
These photos also include a better view of the Westinghouse pump pipework which will be a challenge for the weekend. Then there is the round "washers" and the control gear on the buffer beams... which also need 4 rivets and 4 times... 2 front 2 rear. I am not sure if it is possible to make the Universal joint looking ends. Nothing but a challenge to scratch build!
thanks again
Doug
These show more details than I was hoping for. Dare I say one that I had not really looked deeply into, the push pull gear to the front/ back bufferbeams. The photos in the RCTS and BRJ 41 both have side on views, the 3/4 view shows the push pull gear mounted through the buffer beam.
These photos also include a better view of the Westinghouse pump pipework which will be a challenge for the weekend. Then there is the round "washers" and the control gear on the buffer beams... which also need 4 rivets and 4 times... 2 front 2 rear. I am not sure if it is possible to make the Universal joint looking ends. Nothing but a challenge to scratch build!
thanks again
Doug
Doug
Still not doing enough modelling
Still not doing enough modelling
Who is online
Users browsing this forum: ClaudeBot and 0 guests