May I please ask what the 'Triang Adapter Bushes' are noted in this digest issue, which suggests how an old hornby Jinty chassis may be converted to something suitable to P4?
I have two locomotives kits both of which are originally specified to use the jinty chassis - no doubt compromised in wheelbase or diameter, but ultimately a usful starting point to get some usable motive power quickly for my layout:
[img]
https://i.imgur.com/dhYmvoi.png
[/img]
These are not listed in the stores - any ideas? I have a lathe so I'm happy to turn some up, or if they are for sale that might be more straight forward!
Digest 41.9 and the Hornby Jinty Chassis
-
- Posts: 1953
- Joined: Mon Aug 10, 2009 7:49 pm
Re: Digest 41.9 and the Hornby Jinty Chassis
In the good old days when Hornby were called Tri-ang axles were 9/64” so adapter bushes were produced by the trade to allow the use of 1/8” axles which were the standard then. I doubt they are available now.
Tri-ang chassis of that time had their X04 motor which was a fine piece of engineering, and this continued well into the Hornby era, but gradually this was superseded by cheaper ‘bought in’ alternatives, nowhere near as good. The X04 was, however, a three pole motor, with a 20:1 single start worm, so performance, whilst good, tended to be a bit lively!
Philip
Tri-ang chassis of that time had their X04 motor which was a fine piece of engineering, and this continued well into the Hornby era, but gradually this was superseded by cheaper ‘bought in’ alternatives, nowhere near as good. The X04 was, however, a three pole motor, with a 20:1 single start worm, so performance, whilst good, tended to be a bit lively!
Philip
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Digest 41.9 and the Hornby Jinty Chassis
That digest is from July 1984!
Good luck with old technology chassis - I'm not even sure which incarnation of Jinty chassis that was at that time.
Good luck with old technology chassis - I'm not even sure which incarnation of Jinty chassis that was at that time.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 2524
- Joined: Sun Jul 20, 2008 3:54 pm
Re: Digest 41.9 and the Hornby Jinty Chassis
There must be a number of rather more modern Jinty chassis kits that will fit into the same hole. The Perseverance kit springs to mind though I don't know if that is still avaible. Wizard do something like, cheaper than buying an original chassis on Ebay too. I haven't even looked at Comet or London Road Models.
Re: Digest 41.9 and the Hornby Jinty Chassis
Thank you - HL with wheels and a gearbox looks like the thick end of £70 - but such is the price of finescle, I guess! Comet/Wizard is about £30 cheaper, but doesn't appear to be fold-up...
-
- Posts: 819
- Joined: Sun Jul 20, 2008 6:02 pm
Re: Digest 41.9 and the Hornby Jinty Chassis
The HighLevel chassis is designed to fit the Bachmann version of the Jinty which is more accurate than the Hornby. I can’t swear that it will fit the Hornby body without fettling or worse. The Comet/Wizard edition will fit the Hornby no problem. A HighLevel gearbox is still a good investment for smooth running.
HTH,
David
HTH,
David
-
- Posts: 95
- Joined: Sun Dec 17, 2017 8:49 pm
Re: Digest 41.9 and the Hornby Jinty Chassis
Having built a Highlevel Jinty chassis only this past year, I can say what a joy it was to build.
On the other hand I started a Comet chassis for a Ivatt 2mt 2-6-2T and it wasn't long before I put it all back into a box for another day.
You get what you pay for. Saving a few bob at the start of a model, when you consider the hours we all spend in building these models, i believe is false economy.
Best of luck with your choice.
On the other hand I started a Comet chassis for a Ivatt 2mt 2-6-2T and it wasn't long before I put it all back into a box for another day.
You get what you pay for. Saving a few bob at the start of a model, when you consider the hours we all spend in building these models, i believe is false economy.
Best of luck with your choice.
-
- Posts: 819
- Joined: Sun Jul 20, 2008 6:02 pm
Re: Digest 41.9 and the Hornby Jinty Chassis
ISTR that Bill Bedford did a Jinty frame at one time maybe ten years back? It might be worth asking about to see if one is available second hand. I built his J72 frame and it worked well.
Cheers,
David
Cheers,
David
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Digest 41.9 and the Hornby Jinty Chassis
Is this the Bachman 3F? It wasn't mine, I was asked to investigate poor running, bit of work on the wheels it was a very good runner.
As far as I remember, it had Gibson wheels in the original chassis.
If I wanted a quick conversion, I think the Bachman Jinty is quite easy. I've converted a few panniers by just changing their wheels.
As far as I remember, it had Gibson wheels in the original chassis.
If I wanted a quick conversion, I think the Bachman Jinty is quite easy. I've converted a few panniers by just changing their wheels.
You do not have the required permissions to view the files attached to this post.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 312
- Joined: Tue Oct 01, 2013 10:06 am
Re: Digest 41.9 and the Hornby Jinty Chassis
HL with wheels and a gearbox looks like the thick end of £70
Does the HL kit include a gearbox. My Dean Goods one did.
-
- Posts: 334
- Joined: Mon Jul 12, 2010 5:15 pm
Re: Digest 41.9 and the Hornby Jinty Chassis
David Knight wrote:ISTR that Bill Bedford did a Jinty frame at one time maybe ten years back? It might be worth asking about to see if one is available second hand. I built his J72 frame and it worked well.
Cheers,
David
I have two brand new, pt. no. LFF1001/4 in stock. Will happily trade them both for one High Level version.
Ted.
(A purists' purist)
Who is online
Users browsing this forum: ClaudeBot and 2 guests