Hello,
My experience in P4 conversions to date is entirely with diesel and electric locos, and lots of rolling stock, so quite experienced with MJT and Brassmasters, and latterly Penbits (sample of one so far!). Its about time to bite the bullet and get going on some steam engines, and I have some Brassmasters Easichas kits waiting in the wings, with AG wheels.
So my first question for ten, is there a recommended wheel press/ quartering tool please? I would prefer something foolproof (!), and certainly reliable. To date I have had no issues assembling diesel and coach wheels on their axles, but don't really want to use the hand pressure for steam loco wheels. Any advice appreciated.
PBM.
Wheel Press and Quartering Tools.
-
- Posts: 645
- Joined: Tue Nov 11, 2008 6:51 pm
Re: Wheel Press and Quartering Tools.
Mike Ainsworth covered wheel mounting on page 20 of Scalefour News 198 which you can find in the Scalefour News Archive if you haven't got it.
The GW Models wheel press and quartering jig is worth getting.
George doesn't have a web site but here are the ordering details taken from the latest MRJ
The GW Models wheel press and quartering jig is worth getting.
George doesn't have a web site but here are the ordering details taken from the latest MRJ
You do not have the required permissions to view the files attached to this post.
Last edited by Steve Carter on Sat Dec 05, 2020 11:43 pm, edited 1 time in total.
Steve Carter
-
- Posts: 279
- Joined: Fri Feb 19, 2010 10:36 pm
Re: Wheel Press and Quartering Tools.
The GW Models jigs a good tool of this job but if you are using it for an Easichas with AGW wheels these may be 3mm axles rather than the standard 1/8" axles catered for in the "standard" wheel press. If you call George he will be able to advise the price of the additional parts - I think they were £5 a set when I bought mine. They do make RTR conversions using 3mm axles somewhat easier...
Mike's S4N article, referred to by Steve, is a good one to look out to help with this stage of construction.
Jeremy
Mike's S4N article, referred to by Steve, is a good one to look out to help with this stage of construction.
Jeremy
-
- Posts: 82
- Joined: Tue Apr 23, 2019 10:54 pm
Re: Wheel Press and Quartering Tools.
Thanks for the advice, gents.
John
John
-
- Posts: 12
- Joined: Sat Feb 04, 2023 11:26 am
Re: Wheel Press and Quartering Tools.
Hello,all. I'm going to appear extremely stupid, but I have a GW wheel press and simply cannot work out how to use it, except that it goes in a vice.
Does anyone have written instructions that they could post, or offer a few photos on its use.
Thanks in advance,
Geoff
Does anyone have written instructions that they could post, or offer a few photos on its use.
Thanks in advance,
Geoff
-
- Posts: 46
- Joined: Wed Apr 12, 2017 9:20 pm
Re: Wheel Press and Quartering Tools.
Hi Geoff,
PM me your address or email and I can either email an electronic copy or post a photocopy.
Martin
PM me your address or email and I can either email an electronic copy or post a photocopy.
Martin
-
- Posts: 12
- Joined: Sat Feb 04, 2023 11:26 am
Re: Wheel Press and Quartering Tools.
Thanks, Martin. PM sent
-
- Posts: 861
- Joined: Thu Mar 20, 2014 12:19 pm
Re: Wheel Press and Quartering Tools.
It is in Manufacturers' Instructions in the wiki:
https://www.scalefour.org/members/notes/_media/gw_models_gfc_watts_wheel_press_jig.pdf
https://www.scalefour.org/members/notes/_media/gw_models_gfc_watts_wheel_press_jig.pdf
-
- Posts: 2527
- Joined: Sun Jul 20, 2008 3:54 pm
Re: Wheel Press and Quartering Tools.
Geoff wrote:Hello,all. I'm going to appear extremely stupid, but I have a GW wheel press and simply cannot work out how to use it, except that it goes in a vice.
Does anyone have written instructions that they could post, or offer a few photos on its use.
You may find this description of using a GW press in practice useful too.
viewtopic.php?p=8535#p8535
-
- Forum Team
- Posts: 3046
- Joined: Sun Jul 20, 2008 6:00 pm
Re: Wheel Press and Quartering Tools.
And you don’t really need a vice…
I’ve always hand-pressed on wheels using my GW press. I find that I have enough control, and the wheels I’ve used (Gibson, Sharman, Ultrascale) have never needed forcing.
All the best, and do follow Will’s excellent instructions.
Best
Paul
I’ve always hand-pressed on wheels using my GW press. I find that I have enough control, and the wheels I’ve used (Gibson, Sharman, Ultrascale) have never needed forcing.
All the best, and do follow Will’s excellent instructions.
Best
Paul
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk
www.5522models.co.uk
-
- Posts: 12
- Joined: Sat Feb 04, 2023 11:26 am
Re: Wheel Press and Quartering Tools.
Thank you all so much for your replies. I'll follow it all up.
Geoff
Geoff
-
- Posts: 645
- Joined: Tue Nov 11, 2008 6:51 pm
Re: Wheel Press and Quartering Tools.
Also have a look at the article about Wheel Mounting by Mike Ainsworth on page 20 of Scalefour News 198 (July 2016). Its available in the Scalefour News Archive https://www.scalefour.org/news/news.html
Steve
Steve
Steve Carter
-
- Posts: 12
- Joined: Sat Feb 04, 2023 11:26 am
Re: Wheel Press and Quartering Tools.
Thanks, Steve, I'll check it out.
Who is online
Users browsing this forum: ClaudeBot and 0 guests