Page 1 of 1
H Class Wheels
Posted: Sat Sep 21, 2019 8:17 am
by billbedford
I will be taking a few sets of SECR H class wheels to Scaleforum this year. There will also be some for the Beattie well tank.
IMG_1414.JPG
Note that these have 2mm axles on the drivers. If anyone needs wheels with 1/8" axle please let me know so I can add them to the print.
Re: H Class Wheels
Posted: Sat Sep 21, 2019 9:20 am
by Steve Carter
Great Bill
One set with 2mm axles as discussed please.
See you at Scaleforum.
Many thanks
Steve
Re: H Class Wheels
Posted: Sat Sep 21, 2019 1:17 pm
by kelly
Two sets needed here. Depending on funds at the show however.
Re: H Class Wheels
Posted: Sun Sep 22, 2019 10:01 pm
by Horsetan
billbedford wrote:I will be taking a few sets of SECR H class wheels to Scaleforum this year. There will also be some for the Beattie well tank.
IMG_1414.JPG
Note that these have 2mm axles on the drivers. If anyone needs wheels with 1/8" axle please let me know so I can add them to the print.
One set of each, please, with 1/8" axles.
Any chance of 9F or Britannia / Class 8 drivers?
Re: H Class Wheels
Posted: Tue Sep 24, 2019 1:39 pm
by Guy Rixon
One set please. Either size of axle is OK, as I haven't bought the rest of the chassis bits yet.
Re: H Class Wheels
Posted: Tue Sep 24, 2019 9:37 pm
by kelly
I should have said that it was the H I was interested in wheels wise.
I can't recall what the hornby axles are, are they 2mm? I have 2 of them that will need converting.
What is the price per set?
Re: H Class Wheels
Posted: Sun Sep 29, 2019 8:35 am
by Horsetan
kelly wrote:..... What is the price per set?
H class: £42.50 per set
Beattie WT: £37.50 per set
The Beattie drivers are interesting as the outer circumference of the wheel centre protrudes slightly from the tyre face. Might need shaving back a little. Can the spokes be filed down a little, I wonder?
Re: H Class Wheels
Posted: Thu Oct 03, 2019 7:56 pm
by richard49
Unfortunately I couldn't make Scaleforum. Will these wheels be available on your website?
Richard
Re: H Class Wheels
Posted: Fri Oct 04, 2019 11:21 am
by FCA
Bill, I notice that the wheels look like they're self quatering.
If this is so are they left lead like the prototype please?
Richard
Re: H Class Wheels
Posted: Fri Oct 04, 2019 4:10 pm
by billbedford
They could be, if I could work out what the geometry should be.