Recommendations please for a suitable combination of Mashima motor and High Level gearbox for a Finney M7.
The two Portescap gearbox sides are missing from the etch so l won't be able to use my last Portescap for the build.
Many thanks
John
Suitable motor/gearbox for Finney M7
-
- Posts: 561
- Joined: Thu Dec 31, 2009 4:49 pm
Re: Suitable motor/gearbox for Finney M7
John,
Have a look at the High Level range combined with a Mashima motor.
Gordon A
Have a look at the High Level range combined with a Mashima motor.
Gordon A
-
- Posts: 2524
- Joined: Sun Jul 20, 2008 3:54 pm
Re: Suitable motor/gearbox for Finney M7
steamraiser wrote:Have a look at the High Level range combined with a Mashima motor....
.. there is a lot of useful stuff planning stuff on the Highlevel site under GEARBOXES including lots of sample installations and dimensioned diagrams of all the possibilities.
-
- Posts: 654
- Joined: Mon Jan 11, 2010 8:06 pm
Re: Suitable motor/gearbox for Finney M7
But if you wanted to use your Portescap, doesn't MJT do gearbox sides?
David L-T
-
- Posts: 492
- Joined: Sat Jul 26, 2008 4:53 pm
Who is online
Users browsing this forum: ClaudeBot and 1 guest