GWR inside frame colour
-
- Posts: 912
- Joined: Sun Feb 01, 2009 10:16 pm
GWR inside frame colour
Just finishing a High Level 14xx chassis kit and am wondering if the red that the GWR painted the inside frames and motion was the same as bufferbeam red? which I would interpret as vermillion.
Anyone any thoughts as to whether Railmatch or Precision would be the better bet? I ask because I know from previous jobs that red can be a very transparent colour.
Steve
Anyone any thoughts as to whether Railmatch or Precision would be the better bet? I ask because I know from previous jobs that red can be a very transparent colour.
Steve
-
- Posts: 1600
- Joined: Wed Feb 11, 2015 3:39 pm
Re: GWR inside frame colour
I had always understood that the colour was Red Oxide rather than buffer beam red? Could well be wrong though.
Tim Lee
-
- Posts: 181
- Joined: Wed Jul 23, 2008 7:45 pm
Re: GWR inside frame colour
I found a link from the GWR Modelling site to a page by Ian Rathbone http://www.ianrathbonemodelpainting.co.uk/gwr-locomotive-liveries-1923-39.php which says Venetian Red, which is the same as Red Oxide.
The GWR Modelling livery section http://www.gwr.org.uk/liveries.html has further details with more specific time periods, but I don't know which matches yours. The 1906-1934 section has a preservation period photo of a set of frames taken at Didcot (by Tim Venton).
Bryan
The GWR Modelling livery section http://www.gwr.org.uk/liveries.html has further details with more specific time periods, but I don't know which matches yours. The 1906-1934 section has a preservation period photo of a set of frames taken at Didcot (by Tim Venton).
Bryan
-
- Posts: 912
- Joined: Sun Feb 01, 2009 10:16 pm
Re: GWR inside frame colour
That's very useful, thank you, luckily I have some Venetian Red in the paintbox!
One other query for GW buffs; when did the safety valve cover get painted? my loco is early '30s so relatively new and I thought they were outshopped with painted covers, but all colour pictures (admittedly of other models or preserved examples) show it as brass.
Steve
One other query for GW buffs; when did the safety valve cover get painted? my loco is early '30s so relatively new and I thought they were outshopped with painted covers, but all colour pictures (admittedly of other models or preserved examples) show it as brass.
Steve
-
- Posts: 181
- Joined: Wed Jul 23, 2008 7:45 pm
Re: GWR inside frame colour
Covered in the text below Tim's photo in http://www.gwr.org.uk/liveriesloco1906.html
Officially painted after 1922, but plenty of local variation.
Bryan
Officially painted after 1922, but plenty of local variation.
Bryan
-
- Posts: 1983
- Joined: Wed Jun 23, 2010 1:04 pm
Re: GWR inside frame colour
BryanJohnson wrote: Venetian Red, which is the same as Red Oxide.
Not according to BS381.
steve howe wrote:One other query for GW buffs; when did the safety valve cover get painted? my loco is early '30s so relatively new and I thought they were outshopped with painted covers, but all colour pictures (admittedly of other models or preserved examples) show it as brass.
The 48XX as built were in plain green, and the safety valve bonnets were painted. Brass is basically a preservation affectation, although may have appeared in earlier days occasionally, but unofficially. They became 14XX in 1946 to allow for oil burning 2-8-0s to be numbered in the 48XX series.
Regards
Noel
Noel
-
- Posts: 643
- Joined: Sun Jul 20, 2008 4:24 pm
Re: GWR inside frame colour
Venetian Red is an Iron Oxide pigmented paint. As is Indian Red - called Indian Red as it used a particular Haematite ore imported from India which gave it a purplish hue.
regards
Alan
regards
Alan
-
- Posts: 1425
- Joined: Fri Oct 02, 2009 6:20 pm
Re: GWR inside frame colour
The red inside frame colour used on preserved GWR locos (including the preserved Dean Goods at 'Steam' museum in Swindon - which was restored at Swindon Works before going to the museum) is a bright red - certainly not red oxide, indian red or venetian red.
[Incidentally, do you remember when Pendennis Castle went to Australia? Someone misinterpreted the painting guidelines and painted the outsides of the frames red (!!!!) It looked very odd indeed.
[Incidentally, do you remember when Pendennis Castle went to Australia? Someone misinterpreted the painting guidelines and painted the outsides of the frames red (!!!!) It looked very odd indeed.
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: GWR inside frame colour
Here is the underside of Caerphilly Castle, pictures taken in 2003. I believe this engine was not painted in preservation, but at Swindon works.
You do not have the required permissions to view the files attached to this post.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 912
- Joined: Sun Feb 01, 2009 10:16 pm
Re: GWR inside frame colour
Hmmm..
Its all rather subjective isn't it? like so many period paint colours it depended on the eye of the foreman doing the mixing among many other factors. I have Precision Red Oxide and Railmatch SR Venetian Red in my paintbox. On examination the Venetian Red was a sort of muddy pinky brown, heaven knows what the Southern used that for.
I was told the reason why the motion was painted red was in view of so many accidents involving enginemen, fitters, 'jumpers' et al, so as not to show the blood...
This may be just a hoary old tale, and as it was told to me by Chris Challis, himself a hoary old taleteller, we may take it with a pinch of salt.
My frames are now painted Red Oxide and look rather good!
Steve
Its all rather subjective isn't it? like so many period paint colours it depended on the eye of the foreman doing the mixing among many other factors. I have Precision Red Oxide and Railmatch SR Venetian Red in my paintbox. On examination the Venetian Red was a sort of muddy pinky brown, heaven knows what the Southern used that for.
I was told the reason why the motion was painted red was in view of so many accidents involving enginemen, fitters, 'jumpers' et al, so as not to show the blood...
This may be just a hoary old tale, and as it was told to me by Chris Challis, himself a hoary old taleteller, we may take it with a pinch of salt.
My frames are now painted Red Oxide and look rather good!
Steve
-
- Posts: 1600
- Joined: Wed Feb 11, 2015 3:39 pm
Re: GWR inside frame colour
steve howe wrote:I was told the reason why the motion was painted red was in view of so many accidents involving enginemen, fitters, 'jumpers' et al, so as not to show the blood...
This may be just a hoary old tale, and as it was told to me by Chris Challis, himself a hoary old taleteller, we may take it with a pinch of salt.
I understood that it was meant to be easier to see cracks when painted red.
Tim Lee
-
- Posts: 1983
- Joined: Wed Jun 23, 2010 1:04 pm
Re: GWR inside frame colour
steve howe wrote:On examination the Venetian Red was a sort of muddy pinky brown, heaven knows what the Southern used that for.
Headstocks (and sometimes buffer guides), veranda ends and inner body ends of goods brake vans. Whether Railmatch got the shade right I couldn't say.
Regards
Noel
Noel
-
- Posts: 174
- Joined: Wed Jan 30, 2013 12:18 pm
Re: GWR inside frame colour
I'm now struggling to remember where, in the last 20 years, I read about hollow bolts filled with red ink that would "bleed" when faulty. Fairly sure it was in aviation.
Andrew
Andrew
-
- Posts: 1557
- Joined: Sun Sep 14, 2008 10:25 pm
Re: GWR inside frame colour
Not GWR but EE. Early paint technology used red for frames and gears as it showed up cracks. Green was used for boilers as it was heat resistant.
https://lms10000.co.uk/
https://lms10000.co.uk/
You do not have the required permissions to view the files attached to this post.
Ordsall Road (BR(E)), Forge Mill Sidings (BR(M)), Kirkcliffe Coking Plant (BR(E)), Swanage (BR (S)) and Heaby (LMS/MR). Acquired Thorneywood (GNR). Still trying to "Keep the Balance".
-
- Posts: 364
- Joined: Sun May 05, 2013 5:23 pm
Re: GWR inside frame colour
When doing dye penetrant crack detection, the initial colour is red liquid which after a pre-determined time is removed and the white is sprayed over the area being tested and you hope not too see any red leaching from cracks.
Phil
Phil
-
- Posts: 19
- Joined: Mon Dec 06, 2010 12:00 am
Re: GWR inside frame colour
I used a red oxide primer for the inside of the frames for my 58xx (an old Perseverence etched body on a High Level chassis). It comes out darker than the Castle and Dean Goods in this thread but a loco in service would have picked up dirt and oil fairly quickly in this area I don't think the examples which were prepared for display in the Science Museum or GWR Museum have the appearance of a working loco, since they have become effectively "stuffed and mounted" (a great shame as I would love to see 2516 in steam again)
Return to “Chassis and Suspensions”
Who is online
Users browsing this forum: ClaudeBot, Ian@Exton and 2 guests