Last orders for an etched chassis kit for the Hornby 0-4-0 Peckett.

User avatar
steamraiser
Posts: 406
Joined: Thu Dec 31, 2009 4:49 pm

Re: An etched chassis for the Hornby Peckett.

Postby steamraiser » Mon Mar 18, 2019 12:42 pm

Version 3 of the etch with the modified lower boiler barrel.

Yes it fits.
HP V3.jpg


Unfortunately I forgot to add the cylinders before soldering the lower boiler barrell in place.

HP chassis V3.jpg


Not the best of pictures, both taken with my phone.
One minor mod to think about which will not require a new etch.
Finalise the written instructions, insert pictures and test.

Gordon A

David Knight
Posts: 627
Joined: Sun Jul 20, 2008 6:02 pm

Re: An etched chassis for the Hornby Peckett.

Postby David Knight » Mon Mar 18, 2019 1:35 pm

Very encouraging Gordon :thumb :thumb ! Any estimates as to price yet?

Cheers,

David

User avatar
steamraiser
Posts: 406
Joined: Thu Dec 31, 2009 4:49 pm

Re: An etched chassis for the Hornby Peckett.

Postby steamraiser » Tue Mar 19, 2019 12:21 am

Sorry David, no estimates on price yet.

Gordon A

Knuckles
Posts: 1198
Joined: Fri Nov 18, 2011 9:15 pm

Re: An etched chassis for the Hornby Peckett.

Postby Knuckles » Tue Mar 19, 2019 5:52 pm

Mark me as a potential buyer. :thumb
“He who dares not offend cannot be honest.” Thomas Paine

http://www.shapeways.com/shops/sparksho ... eationsscc
Mostly offering Loco kits & bits in 4mm.
SCC Photon Resin Prints Price list
download/file.php?id=19320

Andrew Ullyott
Posts: 165
Joined: Fri Aug 08, 2008 2:31 pm

Re: An etched chassis for the Hornby Peckett.

Postby Andrew Ullyott » Tue Mar 19, 2019 6:47 pm

Likewise

User avatar
steamraiser
Posts: 406
Joined: Thu Dec 31, 2009 4:49 pm

Re: An etched chassis for the Hornby Peckett.

Postby steamraiser » Sun Apr 07, 2019 6:35 pm

Dodo visiting Rolvenden late Saturday afternoon at Scalefour North.
IMG_20190406_164240.jpg


Just the instructions and a third party test build to do.

Gordon A

David Knight
Posts: 627
Joined: Sun Jul 20, 2008 6:02 pm

Re: An etched chassis for the Hornby Peckett.

Postby David Knight » Mon Apr 08, 2019 1:07 am

Excellent Gordon. Two for me please.

Cheers,

David

User avatar
steamraiser
Posts: 406
Joined: Thu Dec 31, 2009 4:49 pm

Re: An etched chassis for the Hornby Peckett.

Postby steamraiser » Tue May 07, 2019 3:38 pm

Ins 52.jpg


At last I am pleased to announce that the Hornby EM / P4 chassis kit has been assembled using the version 3 etch and the twelve pages of instructions with photographs.
A few tweaks to the instructions were requested otherwise I was advised all was well.

The etch along with associated rod, tube, 8ba screw and nut will cost £22.00.
Post and packing will cost a further £3.50 for signed for delivery.
The instructions if I can e-mail them to you will be Free Of Charge.
If you wish a hard copy colour printing in Bristol costs between £0.75 to £1.00 an A4 sheet!

What I would like is confirmation of definite orders along with personal contact details to be e-mailed to me at ga007d9065@blueyonder.co.uk please.
I am looking to place an order with the etchers at the end of the month, unless I get an initial tsunami of orders.
There is no need to send me any money until I have received the etches, then I will notify you requesting payment before despatch.

I will send out instructions to those who wish to see them before placing an order. Just send me a request at the above e-mail address.

Gordon A

David Knight
Posts: 627
Joined: Sun Jul 20, 2008 6:02 pm

Re: An etched chassis for the Hornby Peckett.

Postby David Knight » Tue May 07, 2019 4:13 pm

Brilliant! Email to follow :thumb :thumb

Cheers,

David

philip-griffiths
Posts: 97
Joined: Wed Aug 18, 2010 9:44 pm

Re: An etched chassis for the Hornby Peckett.

Postby philip-griffiths » Tue May 07, 2019 10:59 pm

I am interested in an etch.

What else is required to complete please so that I can determine the total cost? Wheels, gear set?

Many thanks.

User avatar
steamraiser
Posts: 406
Joined: Thu Dec 31, 2009 4:49 pm

Re: An etched chassis for the Hornby Peckett.

Postby steamraiser » Wed May 08, 2019 11:47 am

Sent you a message.

Gordon

Enigma
Posts: 233
Joined: Tue Aug 13, 2013 2:49 pm

Re: An etched chassis for the Hornby Peckett.

Postby Enigma » Wed May 08, 2019 1:50 pm

Yes please Mr A. Just the one for me - and there's no rush :thumb

User avatar
jsherratt
Posts: 73
Joined: Sun Aug 17, 2008 3:21 pm

Re: An etched chassis for the Hornby Peckett.

Postby jsherratt » Thu May 09, 2019 2:27 pm

I think this looks excellent!

Cheers, John

AndrewPW
Posts: 1
Joined: Sat Sep 15, 2018 4:09 pm

Re: An etched chassis for the Hornby Peckett.

Postby AndrewPW » Fri May 24, 2019 3:53 pm

Hi Barry
Please advise me when this is available. Met you at S4 North and very definatley interested ...
Cheers!
Andy

User avatar
steamraiser
Posts: 406
Joined: Thu Dec 31, 2009 4:49 pm

Re: An etched chassis for the Hornby Peckett.

Postby steamraiser » Fri May 24, 2019 4:36 pm

PM sent.
Gordon A

User avatar
steamraiser
Posts: 406
Joined: Thu Dec 31, 2009 4:49 pm

Re: Last orders for an etched chassis kit for the Hornby 0-4-0 Peckett.

Postby steamraiser » Tue Sep 03, 2019 2:56 pm

Firstly my thanks to every one who bought a chassis kit from the first batch.
This far exceeded my expectations.

Now as the revised heading indicates I am giving notice that I will not be accepting any more orders for the 0-4-0 Peckett chassis kit after the 30th September 2019, as I wish to get back to other projects including some actual modelling.

Orders can be placed by e-mail to ga007d9065@blueyonder.co.uk , or by writing to me at 154 Newbridge Road, St Annes, Bristol. BS4 4DS.

Again thank you for your support.

Gordon A

User avatar
Tim V
Posts: 2236
Joined: Tue Jul 29, 2008 4:40 pm

Re:Last orders for an etched chassis kit for the Hornby 0-4-0 Peckett.

Postby Tim V » Tue Sep 03, 2019 3:27 pm

You need to alter the heading on your first post!

Done,
Keith
Last edited by grovenor-2685 on Tue Sep 03, 2019 4:07 pm, edited 1 time in total.
Reason: topic header changed
Tim V
Scalefour News Editor

User avatar
Horsetan
Posts: 920
Joined: Tue Jul 29, 2008 9:24 am

Re: Last orders for an etched chassis kit for the Hornby 0-4-0 Peckett.

Postby Horsetan » Wed Sep 04, 2019 1:45 pm

steamraiser wrote:..... I will not be accepting any more orders for the 0-4-0 Peckett chassis kit after the 30th September 2019, as I wish to get back to other projects including some actual modelling.

Orders can be placed by e-mail to ga007d9065@blueyonder.co.uk ....


Order duly sent.
That would be an ecumenical matter.


Return to “Chassis and Suspensions”

Who is online

Users browsing this forum: No registered users and 1 guest