Handy Riveting Jig!

Lindsay G
Posts: 207
Joined: Thu Aug 07, 2008 2:16 am

Handy Riveting Jig!

Postby Lindsay G » Wed Dec 18, 2013 11:54 pm

Thankfully, the Caley weren't strong on rivets so I've not needed to lash out on a proper riveting machine so far. However, the bottom of the firebox on a Class 782, under construction presently, needed a double offset row of rivets. Hardly the easiest thing to accomplish freehand. A proper tool could be borrowed but that would only have delayed things. The answer was at hand all along, and a jolly nice job it made, equal to that of more expensive tools :

Firebox.jpg

And the nature of this highly accurate piece of kit? Nothing more than the High Level CSB jig :

CSB cum Riveting jig.jpg

The outline of the jig was drawn on paper, thin brass (from the K&S Shim Pack) was selotaped along the line of the oblong holes, the jig position over the outline, and the first row marked out using row A of the jig and the .5mm side of the jig. Turn the jig round to the whole mm side, position it slightly higher (if needed), and mark out using row B. All marked out with a scriber from the Aldi craft tool set that supposedly aren't meant to last. So,all in all, a really cheap but very effective solution.

Lindsay
You do not have the required permissions to view the files attached to this post.

David Knight
Posts: 813
Joined: Sun Jul 20, 2008 6:02 pm

Re: Handy Riveting Jig!

Postby David Knight » Thu Dec 19, 2013 2:23 am

Very creative thinking! :thumb

Cheers,

David

User avatar
Tim V
Posts: 2868
Joined: Tue Jul 29, 2008 4:40 pm

Re: Handy Riveting Jig!

Postby Tim V » Thu Dec 19, 2013 4:59 pm

A use for the jig at last :D
Tim V
(Not all railways in Somerset went to Dorset)


Return to “Other Workshop Practice”

Who is online

Users browsing this forum: ClaudeBot and 0 guests