Brassmasters Coronation test build
-
- Posts: 2186
- Joined: Wed Jul 30, 2008 5:56 pm
Brassmasters Coronation test build
Hi All
I am currently embarked on building a test build of the forthcoming Brassmasters Coronation or Duchess kit. Way before I got distracted with Brettell Road I always thought that if Brassmasters ever did a Duchess i would have a go at building one as 46235 'City of Birmingham'. Well now they are and so I am!
Of course its a personal opinion thing but I never really liked streamlined steam locos. While the Duchesses were a little more thoughtfully designed than the god awful GWR efforts I always thought they looked a bit like an upturned bath tub and have to admit the A4's did look a fair bit better. However with the streamlining taken off the Duchesses were 'it'. The steam locomotive version of the Concorde moment. To my eyes, at least, the pinnacle of steam loco perfection.
Anyway enough hero worship and on to the model. Starting with...
The main sub-frames. The loco frames come in 3 sub sections related to the wheels. A driving wheel section, a pony truck section and a bogie section.
The chassis upside down, test fitting the main coupling rods.
The main frame with the brass overlays fitted.
The front or bogie area sub-frame.
More to follow.
I am currently embarked on building a test build of the forthcoming Brassmasters Coronation or Duchess kit. Way before I got distracted with Brettell Road I always thought that if Brassmasters ever did a Duchess i would have a go at building one as 46235 'City of Birmingham'. Well now they are and so I am!
Of course its a personal opinion thing but I never really liked streamlined steam locos. While the Duchesses were a little more thoughtfully designed than the god awful GWR efforts I always thought they looked a bit like an upturned bath tub and have to admit the A4's did look a fair bit better. However with the streamlining taken off the Duchesses were 'it'. The steam locomotive version of the Concorde moment. To my eyes, at least, the pinnacle of steam loco perfection.
Anyway enough hero worship and on to the model. Starting with...
The main sub-frames. The loco frames come in 3 sub sections related to the wheels. A driving wheel section, a pony truck section and a bogie section.
The chassis upside down, test fitting the main coupling rods.
The main frame with the brass overlays fitted.
The front or bogie area sub-frame.
More to follow.
Last edited by jim s-w on Thu Mar 02, 2023 6:34 pm, edited 2 times in total.
-
- Posts: 87
- Joined: Sun Aug 17, 2008 3:21 pm
Re: Brassmasters Duchess test build
Looks very nice so far
John
John
-
- Posts: 533
- Joined: Tue Aug 13, 2013 2:49 pm
Re: Brassmasters Duchess test build
Looks so good it almost make me want to buy one! And that's something for a GWR man to admit.
Although, at the end of the day, it's only a glorified King innit..............................
I used to love seeing them at Crewe and Chester when I was a lad.
Although, at the end of the day, it's only a glorified King innit..............................
I used to love seeing them at Crewe and Chester when I was a lad.
-
- Posts: 1252
- Joined: Wed Sep 01, 2010 9:57 am
Re: Brassmasters Duchess test build
Jim, your making me want to get back into the Finney V2 I have been building for years.... The chassis has had the main bits put together.... the tender is painted black... and the foot plate and boiler fabricated.... But my list of things to finish keep pushing it back a little... completion of a Dave Bradwell J39 which was commenced by others is nearing running. Just needs the motor gear box installed, pickups and a paint!
Doug
Still not doing enough modelling
Still not doing enough modelling
-
- Posts: 1389
- Joined: Sat Jan 09, 2010 11:33 pm
Re: Brassmasters Duchess test build
This is a delicious prospect Jim! It will be great if you keep on showing us the build.The forum can show so much more than magazine articles. Did you test build their Princess kit too I wonder.
-
- Posts: 2186
- Joined: Wed Jul 30, 2008 5:56 pm
Re: Brassmasters Duchess test build
Julian Roberts wrote:This is a delicious prospect Jim! It will be great if you keep on showing us the build.The forum can show so much more than magazine articles. Did you test build their Princess kit too I wonder.
Nope, not me. I’ve built a couple of Brassmasters kits now but this is my first test build
I will post here as I go along
Jim
Last edited by jim s-w on Sat Oct 26, 2019 5:01 pm, edited 1 time in total.
-
- Posts: 1371
- Joined: Tue Jul 29, 2008 9:24 am
Re: Brassmasters Duchess test build
Already have my name down for one. Just the one
Wonder how many resin boilers they'll be able to produce before the mould gives up? They managed to squeeze 43 Princesses out of the last one!
Wonder how many resin boilers they'll be able to produce before the mould gives up? They managed to squeeze 43 Princesses out of the last one!
That would be an ecumenical matter.
-
- Posts: 2186
- Joined: Wed Jul 30, 2008 5:56 pm
Re: Brassmasters Duchess test build
So progress continues on my Coronation build.
The front frame is as far as I can go for the moment. (I don't have the cast bits for the loco yet. If you are wondering about the cylinders they are a separate sub assembly.
No problems with the pony truck so far. The kit provides for both the earlier and later types. This is the later one.
The bogie is compensated. As the bogie is the only part of the loco that traps the wheels in place I have used some old/rejected wagon wheels for the moment. I ideally only want to put wheels onto the axle once if I can.
Without the wheels in the way.
I couldn't resist a temporary mock up to see get a better feel for the loco. I've used a High Level Road runner + gearbox. The main drivers don't have their springs in place yet so its sitting a little off at the moment.
The front frame is as far as I can go for the moment. (I don't have the cast bits for the loco yet. If you are wondering about the cylinders they are a separate sub assembly.
No problems with the pony truck so far. The kit provides for both the earlier and later types. This is the later one.
The bogie is compensated. As the bogie is the only part of the loco that traps the wheels in place I have used some old/rejected wagon wheels for the moment. I ideally only want to put wheels onto the axle once if I can.
Without the wheels in the way.
I couldn't resist a temporary mock up to see get a better feel for the loco. I've used a High Level Road runner + gearbox. The main drivers don't have their springs in place yet so its sitting a little off at the moment.
-
- Posts: 80
- Joined: Tue Apr 23, 2019 10:54 pm
Re: Brassmasters Duchess test build
How would you rate the fold-up and ease of soldering Jim? Expert standard required or average with due care and attention?
Any tips on how you set up and quartered the drivers?
PBM
Any tips on how you set up and quartered the drivers?
PBM
-
- Posts: 2186
- Joined: Wed Jul 30, 2008 5:56 pm
Re: Brassmasters Duchess test build
Seems ok so far.
Bear in mind I’ve only actually built 2 complete etched loco kits, one mashed up white metal one and a handful of chassis before. This will be my second attempt at outside valve gear so I guess ‘if’ I manage to do it It can’t be that hard.
Jim
Bear in mind I’ve only actually built 2 complete etched loco kits, one mashed up white metal one and a handful of chassis before. This will be my second attempt at outside valve gear so I guess ‘if’ I manage to do it It can’t be that hard.
Jim
-
- Posts: 2186
- Joined: Wed Jul 30, 2008 5:56 pm
Re: Brassmasters Duchess test build
I’ve got a GW models wheel press but to be honest haven’t really got on with it so I do the quartering by eye (looking through the spokes)
-
- Posts: 1252
- Joined: Wed Sep 01, 2010 9:57 am
Re: Brassmasters Duchess test build
Have to agree with you Jim, I find it easier to quarter by eye and feel as if the chassis and the rods are correct the loco rolls nicely. I have recently done a J39 which had a few challanges as the Gibson wheels on the driven axle are slightly loose on the axle. I have to look at a way to pin the wheels to the axle now that it is running OK.
Doug
Still not doing enough modelling
Still not doing enough modelling
-
- Posts: 80
- Joined: Tue Apr 23, 2019 10:54 pm
Re: Brassmasters Duchess test build
Thanks for the replies Jim.
PBM
PBM
-
- Posts: 2516
- Joined: Sun Jul 20, 2008 3:54 pm
Re: Brassmasters Duchess test build
DougN wrote:Have to agree with you Jim, I find it easier to quarter by eye and feel as if the chassis and the rods are correct the loco rolls nicely. I have recently done a J39 which had a few challanges as the Gibson wheels on the driven axle are slightly loose on the axle. I have to look at a way to pin the wheels to the axle now that it is running OK.
Wouldn't be without my GW wheel press, much easier then doing it by eye. What's your problem guy's?
Easiest way to pin an axles is to cut a slot across the end of the axle at a slight angle so it is deeper at one side and hardly goes down the other side at all. Pop on the axle as usual. Then use the slot to drill into the wheel hub. Put in a wire pin, fill up slot and clean off.
Don Roland taught me this.
-
- Posts: 1600
- Joined: Wed Feb 11, 2015 3:39 pm
Re: Brassmasters Duchess test build
Will L wrote:
Easiest way to pin an axles is to cut a slot across the end of the axle at a slight angle so it is deeper at one side and hardly goes down the other side at all. Pop on the axle as usual. Then use the slot to drill into the wheel hub. Put in a wire pin, fill up slot and clean off.
Don Roland taught me this.
Thanks
Tim Lee
-
- Posts: 176
- Joined: Mon Oct 22, 2018 7:48 am
Re: Brassmasters Duchess test build
Jim,
From what you've posted, so far, that kit looks to be quite something. For me, even as a confirmed North Eastern, LNER and Gresley devotee, the 'semis' - that was how we knew then as youthful train spotters - were quite something and, perhaps, along with the Peppercorn Pacifics, the epitome of British Express Passenger loco design.
Looking forward to seeing this progress and I bet you'll build more than one!!
Regards
Mike
From what you've posted, so far, that kit looks to be quite something. For me, even as a confirmed North Eastern, LNER and Gresley devotee, the 'semis' - that was how we knew then as youthful train spotters - were quite something and, perhaps, along with the Peppercorn Pacifics, the epitome of British Express Passenger loco design.
Looking forward to seeing this progress and I bet you'll build more than one!!
Regards
Mike
-
- Forum Team
- Posts: 3918
- Joined: Sun Jun 29, 2008 8:02 pm
Re: Brassmasters Duchess test build
Will L wrote:Easiest way to pin an axles is to cut a slot across the end of the axle at a slight angle so it is deeper at one side and hardly goes down the other side at all. Pop on the axle as usual. Then use the slot to drill into the wheel hub. Put in a wire pin, fill up slot and clean off.
Don Roland taught me this.
Only problem there is that the Duchess has hollow driving axles
Rgds
-
- Posts: 61
- Joined: Thu May 12, 2011 12:05 pm
Re: Brassmasters Duchess test build
grovenor-2685 wrote:Will L wrote:Easiest way to pin an axles is to cut a slot across the end of the axle at a slight angle so it is deeper at one side and hardly goes down the other side at all. Pop on the axle as usual. Then use the slot to drill into the wheel hub. Put in a wire pin, fill up slot and clean off.
Don Roland taught me this.
Only problem there is that the Duchess has hollow driving axles
Rgds
I don't think this will be an issue, because if I interpret Wills approach correctly the slot is cut on the outside of the axle and the taper runs out along the length of the axle not across the face similar to the method I wrote up in MRJ several years ago.
-
- Forum Team
- Posts: 3918
- Joined: Sun Jun 29, 2008 8:02 pm
Re: Brassmasters Duchess test build
Not how I interpret "across the end"
Rgds
Rgds
-
- Posts: 2516
- Joined: Sun Jul 20, 2008 3:54 pm
Re: Brassmasters Duchess test build
And not what I intended either but a perfectly good approach.
However, given a hollow axle, rather than cutting an angled slot, could you not drill an angled hole starting in the hole in the middle of the axle?
I'm only persisting with this because I usually find that if you want to drill a hole through adjacent things of different hardnesses it's better to start of with the hard one. Remember I'm a kitchen table man so, if this is going to be a hand drilling job, drilling through the wheel hub first and into the axle is something which is unlikely to go well.
However, given a hollow axle, rather than cutting an angled slot, could you not drill an angled hole starting in the hole in the middle of the axle?
I'm only persisting with this because I usually find that if you want to drill a hole through adjacent things of different hardnesses it's better to start of with the hard one. Remember I'm a kitchen table man so, if this is going to be a hand drilling job, drilling through the wheel hub first and into the axle is something which is unlikely to go well.
-
- Posts: 2186
- Joined: Wed Jul 30, 2008 5:56 pm
Re: Brassmasters Duchess test build
Will L wrote: Remember I'm a kitchen table man so, if this is going to be a hand drilling job, drilling through the wheel hub first and into the axle is something which is unlikely to go well.
It’s what I normally do. Had a few broken bits (which I just use as the pin anyway) but other than that not had a problem. I don’t do it by hand mind you.
Jim
-
- Posts: 2516
- Joined: Sun Jul 20, 2008 3:54 pm
Re: Brassmasters Duchess test build
jim s-w wrote:... I don’t do it by hand mind you.
I think that's the point Jim.
-
- Posts: 2186
- Joined: Wed Jul 30, 2008 5:56 pm
Re: Brassmasters Duchess test build
I use a hand held mini drill if that helps?
-
- Posts: 61
- Joined: Thu May 12, 2011 12:05 pm
Re: Brassmasters Duchess test build
Will L wrote:And not what I intended either but a perfectly good approach.
However, given a hollow axle, rather than cutting an angled slot, could you not drill an angled hole starting in the hole in the middle of the axle?
I'm only persisting with this because I usually find that if you want to drill a hole through adjacent things of different hardnesses it's better to start of with the hard one. Remember I'm a kitchen table man so, if this is going to be a hand drilling job, drilling through the wheel hub first and into the axle is something which is unlikely to go well.
The photo below shows the way I do it.
You do not have the required permissions to view the files attached to this post.
-
- Forum Team
- Posts: 3918
- Joined: Sun Jun 29, 2008 8:02 pm
Re: Brassmasters Duchess test build
The photo below shows the way I do it.
Or rather it shows the end result More information on the way its done would be very useful.
Regards
Who is online
Users browsing this forum: ClaudeBot and 2 guests