New Street

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

New Street

Postby jim s-w » Tue Nov 10, 2009 4:21 pm

Hi All

When I built the plank I needed representations of the Westinghouse EP point machine and heater. With nothing available I knocked them up from scratch but while I needed 2 I built 3. The third one, by a roundabout route found its way to George from S-Kits. Today a parcel arrived back from George with his version of what I sent him. To say I am well pleased with what he has produced would be an understatement!

Cheers

Jim


Image
Last edited by jim s-w on Sun Apr 16, 2023 1:57 pm, edited 1 time in total.
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Fri Nov 20, 2009 10:14 pm

Everyone makes mistakes!

Back in Oct 2003 I had reached this point with my signal box.

Image

I had made a master for the distinctive cladding and copied it in resin. But there comes a time when you have to step back and look at what you have done not from the heart but from the head. It doesn't matter how much time, effort and money you have spent to reach this point but there is one overiding question that needs an answer. That question is a simple one, "is it good enough?"

The answer might not be an easy one and as much as i didn't want to admit it at the time the answer was no! Could I live with it? Ultimately its not about living with it. Will do just wont do. It was inevitable that it would have to be redone.

I had not enjoyed the resin side of the build and I didn't think with my skills (or lack of) I would be able to produce what I needed so the alternative was to use Evergreen L section - nearly 25 packs of it! (70 lengths in total!)

It was 3/16 which was a tad too big so every length needed a sliver cutting off using a piece of H section brass as a guide.

The end result is something I am much, much happier with and I am now pretty much back to where I was in october 03 - This time I am happy to move forward with the model

Image

Image

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

David Knight
Posts: 810
Joined: Sun Jul 20, 2008 6:02 pm

Re: New Street progress

Postby David Knight » Sat Nov 21, 2009 12:18 am

Hi Jim,

Much cleaner looking and well worth the effort. :)

Cheers,

David

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Wed Nov 25, 2009 4:10 pm

Hi All

With my thoughts on my signal box my attention has been drawn to the lighting gantry outside of it. Express models do a lighting gantry but alas the top platform is square while the one at New Street is round. I was able to source the etched bits that Express Models use and set about scratchbuilding the platform. I used a 10 pence piece to assist me file the platform out of 20 thou NS. This was then overlaid with planking and the rest built up from various metal sections from my scrap box. As the layout is set in the day I didn't need the lights to work!

Cheers

Jim

Image
Image
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Wed Dec 02, 2009 11:15 pm

Hi All

Work continues on my Signal box.

This is pretty much there now - Just needs weathering which as the smaller building is secured to the layout I will do in situe. I need to do some work on the interior too but that can be done after the weathering stage.

Image

I decided the safety cage on the ladder was too heavy so I redid it with finer wire.

Image

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
Paul Willis
Forum Team
Posts: 3031
Joined: Sun Jul 20, 2008 6:00 pm

Re: New Street progress

Postby Paul Willis » Thu Dec 03, 2009 7:50 am

I have to say Jim, the bit that caught my eye were the three air-con cabinets on the roof.

Those are just perfectly modelled, and capture such a typical detail of modern buildings so well. I spend a lot of time in meetings on the top floors of buildings, and if you're on (say) the 34th floor, it's fascinating to look down and see how much "junk" there is on the roof of a modern office or factory.

Keep up the inspiration! It's not exactly my personal modelling idyll of rural Suffolk, but it's crackingly good stuff :-)

Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Thu Dec 03, 2009 12:25 pm

Thanks Flymo

If you ever need an air con unit for rural suffolk then these are from S kits.

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Fri Dec 04, 2009 5:09 pm

Hi All

A few pictures of my signal box in situe. Still needs weathering.

Cheers

Jim

Image
Image
Image
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

CBM

Re: New Street progress

Postby CBM » Fri Dec 04, 2009 7:48 pm

Lookin' Good Jim

Chris.

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Fri Dec 11, 2009 11:15 pm

Hi All

A few more classic BNS shots in black and white.

Cheers

Jim

Image

Image
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Fri Dec 18, 2009 5:43 pm

Hi All

This post comes with a warning - if anyone is bored of seeing pictures of that b*****y signal box please look away now!

For those still here I have been weathering! It now looks far more like the depressingly filthy thing it was in the 80's!

Image

Image

I couldn't resist a bit of photoshoppery on this one!

Image

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
Andy W
Posts: 884
Joined: Thu May 21, 2009 8:11 am

Re: New Street progress

Postby Andy W » Sat Dec 19, 2009 9:11 pm

Jim, I remember the building and the area well from that era - and you've nailed it. Brilliant.
Make Worcestershire great again.
Build a wall along the Herefordshire border and make them pay for it.

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Thu Mar 11, 2010 8:07 pm

Hi All

A few new piccies, both of good old Lima stuff

Image

Image

I still think the Lima 31 has something about it that the Hornby one just seems to miss.

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Sat Mar 13, 2010 8:40 am

Hi All

Nearly finished the ballasting on this board. Heres an overview of progress so far.

Image

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

johnWM
Posts: 62
Joined: Mon Aug 04, 2008 9:33 pm

Re: New Street progress

Postby johnWM » Sat Mar 13, 2010 12:57 pm

I remember wandering along to the end of that platform on the right. I was bored, a student at the time, waiting for a train. Sometimes you see a picture that makes you go "Yes, that is how it was" because the colours, detail and mood just feels right. The picture of the class 31 does it for me. The ballast texture and colour looks brilliant in that view. Well tamped down and oily, but with newish lumps on top catching the sun.

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Fri Mar 19, 2010 11:25 pm

Hi All

Something that has been on my 'nearly finished' list for a LONG time is my 07-16 tamper. Built from the Roger Murray etched brass bits with a lot of scratchbuilding here she rests in the siding outside of my signal box.

Image

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

Mark Tatlow
Posts: 897
Joined: Tue Dec 02, 2008 11:24 pm

Re: New Street progress

Postby Mark Tatlow » Mon Mar 22, 2010 2:10 pm

jim s-w wrote:Hi All

Image

Cheers

Jim


Excellent Jim, I do like this view!

I remember these things wheezing away nearer to Surrey than perhaps New Street and this captures the memory to the point that I am sure I am smelling oil and hydraulic fluid!
Mark Tatlow

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Fri Mar 26, 2010 9:40 pm

Hi All

Another pointless little padlock! 3 feet + between this and the viewing public but...

Image

This gate is for a little area of general clutter that can be found at the end of Platform 1 - I have spent a couple of evenings working on this but now its time to move on to the next thing!

Image

But not before a little play with the light!

Image

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Tue Mar 30, 2010 1:26 pm

Hi All

Most of my point motors (scenically I mean) are the Westinghouse EP type - however there is one slip where there is no room for these. Luckily Colin Craig has not long introduced a selection of bits for the clamp lock type so in the tradition of the prototype these have been bodged to fit my Bullhead rail

Image

The Westinghouse EP point motors need a distribution manifold - I have been meaning to model it and tonight I got around to soldering a few bits of wire together, Its a bit big but since you cant see it from the front of the layout anyway...

Image

Finally, anyone who has looked for pics of New Street in the 70's and 80's will know that a shot of an AC or 2 parked outside of the signal box is a classic. A sight long gone and never to return I am afraid but it will live on in 4mm scale!

Image

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Tue Mar 30, 2010 10:11 pm

Hi All

A better view of Colin's clamp locks - pre-paint.

Image

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
Paul Willis
Forum Team
Posts: 3031
Joined: Sun Jul 20, 2008 6:00 pm

Re: New Street progress

Postby Paul Willis » Wed Mar 31, 2010 8:22 am

jim s-w wrote:Finally, anyone who has looked for pics of New Street in the 70's and 80's will know that a shot of an AC or 2 parked outside of the signal box is a classic. A sight long gone and never to return I am afraid but it will live on in 4mm scale!

Image



Jim,

I have to say that as someone that spent most Saturdays in the early eighties travelling Rowley Regis - BNS - Rowley Regis, you've absolutely hit the nail on the head with that picture.

I never paid much attention to the comings and goings of rolling stock at the time (although when Sir Edward Elgar showed up in green, it was unusual enough for me to have a closer look) and the way that you have portrayed something that was just "part of the background" so well brings back instant recognition.

Keep it coming!
Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Thu Apr 01, 2010 2:28 pm

Hi All

Back in February 2007 I printed the first track plans for my New Street project. I thought, as its a shade over 3 years since then, a then and now might be interesting.

Image
Image

Image
Image

More pics from today to follow!

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Thu Apr 01, 2010 3:49 pm

Hi All

A few more pics.

Image
This is the view from the back with 50023 poking its nose out from behind the wall.

Image
The view from platform 2 - looking towards wolverhampton.

Image

Image

Image
(I really like this one!)

Image
Just for fun!

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Sat Apr 10, 2010 9:06 am

Hi All

A bit of news for everyone.

P4NewStreet will now be appearing at DEMU showcase as a work in progress demo. For more info on the show click here

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!

User avatar
jim s-w
Posts: 2185
Joined: Wed Jul 30, 2008 5:56 pm

Re: New Street progress

Postby jim s-w » Thu Apr 22, 2010 9:43 pm

Hi All

more trackwork details thanks to Colin Craig

Image

Id plates for 4mm scale pointwork - neat hu?

Cheers

Jim
Jim Smith-Wright

http://www.p4newstreet.com

Over thinking often leads to under doing!


Return to “jim s-w”

Who is online

Users browsing this forum: ClaudeBot and 1 guest