Finials for covered GWR footbridge
-
- Posts: 101
- Joined: Fri Jun 02, 2017 1:59 pm
Finials for covered GWR footbridge
Hi Gents
I have had the footbridge in a nearly finished state as all that it need's is the finials and weathering. Has anybody got a drawing or sketch of these parts as I would be most grateful and would save me a long drive either to Wilmcote or Hagley stations.
Regards
Pete
You do not have the required permissions to view the files attached to this post.
-
- Posts: 153
- Joined: Wed Oct 08, 2008 9:13 am
Re: Finials for covered GWR footbridge
Scalelink slc012 though you may want more than one pack of course and there are others you may not have an immediate need for here is the linkhttps://www.scalelink.co.uk/cgi-bin/sh000002.pl?WD=slc&PN=Scenic___Scale_1_76__OO_%2Ehtml#aSLC012
-
- Posts: 101
- Joined: Fri Jun 02, 2017 1:59 pm
Re: Finials for covered GWR footbridge
Hi Stephen
The kit came with these finials but they were over 1mm too small and the wrong shape. Thank you for your help
Peter
The kit came with these finials but they were over 1mm too small and the wrong shape. Thank you for your help
Peter
-
- Posts: 135
- Joined: Wed Aug 06, 2008 7:32 am
Re: Finials for covered GWR footbridge
Would photographs help? I'm not far from Wilmcote and could visit over the weekend.
-
- Posts: 861
- Joined: Thu Mar 20, 2014 12:19 pm
Re: Finials for covered GWR footbridge
Found this if it's any use
https://www.gettyimages.co.nz/detail/ne ... /976238240
https://www.gettyimages.co.nz/detail/ne ... /976238240
-
- Posts: 135
- Joined: Wed Aug 06, 2008 7:32 am
Re: Finials for covered GWR footbridge
Here you go:
Birmingham side landing:
Birmingham side landing:
Birmingham side entrance:
Birmingham side landing interior:
Stratford side landing interior:
Stratford side entrance:
Birmingham side landing:
Birmingham side landing:
Birmingham side entrance:
Birmingham side landing interior:
Stratford side landing interior:
Stratford side entrance:
You do not have the required permissions to view the files attached to this post.
-
- Posts: 101
- Joined: Fri Jun 02, 2017 1:59 pm
Re: Finials for covered GWR footbridge
Simon
Thank you very much this will be a great help as I will now scale the photos against the model and will see ic my friend can 3D pring they. Also thank you Winander.
Pete
Thank you very much this will be a great help as I will now scale the photos against the model and will see ic my friend can 3D pring they. Also thank you Winander.
Pete
-
- Posts: 101
- Joined: Fri Jun 02, 2017 1:59 pm
Re: Finials for covered GWR footbridge
Hi Gents
Thank you for all the pictures and info for these. My friend 3D printed them for me. I had to slightly modify them but he will now edited the program if I have any accidents with them and I need replacements. They are only pushed on for now to see how the look but hope to paint and fit later in the week.
Pete
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: ClaudeBot and 0 guests