Edwardian Wagons
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Edwardian Wagons
With an eventual goal of modelling the North London Railway in 1903 I've been building some appropriate wagons. Some of them were built as EM originally, but they'll all end up P4 eventually.
I've got an LCDR open wagon that still needs lettering and the insides painting:
One of Bill Bedford's LNWR D1s and a London Road Models NLR brake van:
A short EM/P4 train posed on Empire Mills:
And the initial box for what will eventually be a GER D16 open wagon:
I've got an LCDR open wagon that still needs lettering and the insides painting:
One of Bill Bedford's LNWR D1s and a London Road Models NLR brake van:
A short EM/P4 train posed on Empire Mills:
And the initial box for what will eventually be a GER D16 open wagon:
Last edited by garethashenden on Mon Oct 16, 2017 5:47 pm, edited 1 time in total.
-
- Posts: 911
- Joined: Sun Mar 27, 2011 6:40 pm
Re: Edwardian Wagons
Is the LCDR open from the D&S kit?
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
Guy Rixon wrote:Is the LCDR open from the D&S kit?
No, it's from 5&9 Models.
-
- Posts: 911
- Joined: Sun Mar 27, 2011 6:40 pm
Re: Edwardian Wagons
Ah. Another extinct range then. Pity; the wagon looks very nice.
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
Guy Rixon wrote:Ah. Another extinct range then. Pity; the wagon looks very nice.
Not entirely. I emailed him asking if he happened to have any in stock. He said he didn't, but that he could have some cast for me. So I got two and some LBSCR axleboxes. I don't know if that would happen again, but it may not hurt to ask.
Re: Edwardian Wagons
If you don't mind some criticisms, in the spirit of "getting it all right":
- Planks on wagon were only chamfered on the outside, the demarkation between them is only visual.
The insides were never painted, they were left as plain timber.
None of the photos I've seen suggest that the LNWR picked out the body iron work in black.
You really need to see a GA of a wagon to model the inside, often carriage bolts were used so there were no washer plates.
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
billbedford wrote:If you don't mind some criticisms, in the spirit of "getting it all right":Planks on wagon were only chamfered on the outside, the demarkation between them is only visual.
The insides were never painted, they were left as plain timber.
None of the photos I've seen suggest that the LNWR picked out the body iron work in black.
You really need to see a GA of a wagon to model the inside, often carriage bolts were used so there were no washer plates.
I probably overdid it on the GER wagon, but in the past when I haven't put any planking on the inside it also looks wrong.
I know they weren't painted on the inside. I meant that I needed to paint them so represent weathered wood.
Fair enough, I can change that. Iron work was black on so many wagons that I sort of did it reflexively.
Re: Edwardian Wagons
Hi Gareth,
You may be aware of the article in Railway Archive No13, about early North London coal trade.
The Windsor pic of dumb buffered wagons include some smaller wagons, one of three painted NLR.
Thought they would make nice scratchbuilds to go with your Brake Van.
Compared to the Parry & Clay Cross wagons, the w/base looks to be c.8ft.
Probably late Victorian - but what the hell.
I have seen reference to Open interiors, maybe just the floor, painted lead colour, or a given a coat of pitch.
But how long that would be apparent - who knows, but your models are v.freshly clean.
Coach bolts with washers, when Washer Plates not used. A challenge, but possible.
Steve.
You may be aware of the article in Railway Archive No13, about early North London coal trade.
The Windsor pic of dumb buffered wagons include some smaller wagons, one of three painted NLR.
Thought they would make nice scratchbuilds to go with your Brake Van.
Compared to the Parry & Clay Cross wagons, the w/base looks to be c.8ft.
Probably late Victorian - but what the hell.
I have seen reference to Open interiors, maybe just the floor, painted lead colour, or a given a coat of pitch.
But how long that would be apparent - who knows, but your models are v.freshly clean.
Coach bolts with washers, when Washer Plates not used. A challenge, but possible.
Steve.
-
- Posts: 911
- Joined: Sun Mar 27, 2011 6:40 pm
Re: Edwardian Wagons
billbedford wrote:Planks on wagon were only chamfered on the outside, the demarkation between them is only visual.
I've always found this odd. As I understand it, the purpose of the chamfer was to avoid trapping water between the planks in order to delay rot. If so, why would the owner not care about rot from the inside of an open wagon? Most opens, surely, would not be sheeted when returned empty, so the insides would frequently be wet.
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
beachboy wrote:Hi Gareth,
You may be aware of the article in Railway Archive No13, about early North London coal trade.
The Windsor pic of dumb buffered wagons include some smaller wagons, one of three painted NLR.
Thought they would make nice scratchbuilds to go with your Brake Van.
Compared to the Parry & Clay Cross wagons, the w/base looks to be c.8ft.
Probably late Victorian - but what the hell.
I have seen reference to Open interiors, maybe just the floor, painted lead colour, or a given a coat of pitch.
But how long that would be apparent - who knows, but your models are v.freshly clean.
Coach bolts with washers, when Washer Plates not used. A challenge, but possible.
Steve.
Off to ebay... That's just the sort of article I need. I have a love of dumb buffered wagons, so I'm happy to stretch dates if I can have more of them.
Re: Edwardian Wagons
I would of thought Guy, that if you put a chamfer both sides, the ( tongue & groove ? ) sheets will become weakened. With a few tons of coal leaning on the one side may then pose structual problem.
I also would consider the chamfer to be only really effective, when paint is applied, thus damp & rain cannot soak into the wood, and encourage gravity do the finnish the job.
Steve.
I also would consider the chamfer to be only really effective, when paint is applied, thus damp & rain cannot soak into the wood, and encourage gravity do the finnish the job.
Steve.
-
- Forum Team
- Posts: 3046
- Joined: Sun Jul 20, 2008 6:00 pm
Re: Edwardian Wagons
garethashenden wrote:billbedford wrote:If you don't mind some criticisms, in the spirit of "getting it all right":Planks on wagon were only chamfered on the outside, the demarkation between them is only visual.
The insides were never painted, they were left as plain timber.
None of the photos I've seen suggest that the LNWR picked out the body iron work in black.
You really need to see a GA of a wagon to model the inside, often carriage bolts were used so there were no washer plates.
I probably overdid it on the GER wagon, but in the past when I haven't put any planking on the inside it also looks wrong.
I know they weren't painted on the inside. I meant that I needed to paint them so represent weathered wood.
Fair enough, I can change that. Iron work was black on so many wagons that I sort of did it reflexively.
I'm with you that there needs to be a representation of "something" on the inside to catch the light and show that there is a difference in texture - even if only between two planks. So my view is that you've got it about right.
In terms of the painting of the inside, well in my view that really does help the realism if there is a decent representation of the unpainted wood. It's one of the things that seems to lift a "model" above a "toy".
I'm currently painting a batch of five LNWR ballast wagons, and it can be quite tricky to determine between the darkish LNWR grey and the black that they used on ironwork _below_ the solebar to establish what is what. All that I would say is that a good picture (there are a couple of really large ones in LNWR Liveries by the HMRS) will be invaluable.
Hope that these thoughts are useful, and keep up the good work of modelling in a Proper Period!
Cheers
Flymo
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk
www.5522models.co.uk
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
I've weather a wagon! The inside is Phoenix Precision "Weathered Wood", then the whole thing has had a black wash.
Last edited by garethashenden on Mon Oct 16, 2017 6:03 pm, edited 1 time in total.
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
Two more wagons have progressed to a shareable point.
LNWR Deal wagon from London Road Models
And a GCR D1 2 plank from Bill Bedford
LNWR Deal wagon from London Road Models
And a GCR D1 2 plank from Bill Bedford
Last edited by garethashenden on Mon Oct 16, 2017 6:08 pm, edited 1 time in total.
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
I got three of Bill Bedford's LNWR D32 vans in the post a couple of weeks ago. I built one this morning. If all kits were this easy to build, a lot more people would build kits. It was incredibly easy to put together. Opening the box to painting in under two hours.
All the parts:
Ready for paint:
It's been painted, should get the diamonds on there tomorrow and fit the wheels and buffers.
All the parts:
Ready for paint:
It's been painted, should get the diamonds on there tomorrow and fit the wheels and buffers.
Last edited by garethashenden on Mon Oct 16, 2017 6:16 pm, edited 1 time in total.
-
- Posts: 1262
- Joined: Fri Nov 18, 2011 9:15 pm
Re: Edwardian Wagons
Awesome. Love the early pre-Grouping periods so its very nice to see some models. That kit does indeed look a doddle. Looking forward to the finished result.
What couplings do you use?
What couplings do you use?
“He who dares not offend cannot be honest.” Thomas Paine
https://www.sparkshotcustomcreations.com/
Mostly 3D Printed Loco kits etc.
SCC Price list (7/4/22)
https://www.sparkshotcustomcreations.co ... e77d42.pdf
https://www.sparkshotcustomcreations.com/
Mostly 3D Printed Loco kits etc.
SCC Price list (7/4/22)
https://www.sparkshotcustomcreations.co ... e77d42.pdf
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
Knuckles wrote:Awesome. Love the early pre-Grouping periods so its very nice to see some models. That kit does indeed look a doddle. Looking forward to the finished result.
What couplings do you use?
Thanks!
I'm using three links.
-
- Posts: 570
- Joined: Thu Nov 05, 2009 10:28 am
Re: Edwardian Wagons
Darned clever that Mr Bedford.....
Unthinking respect for authority is the greatest
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
After a visit to the paint shop things have progressed a bit. They still need to go visit the scale, but that will happen soon.
Last edited by garethashenden on Tue Oct 17, 2017 4:20 am, edited 1 time in total.
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
I also finished a North London brake van at least a month ago but failed to photograph it at the time. Here it is:
-
- Posts: 403
- Joined: Tue Aug 11, 2009 8:42 pm
Re: Edwardian Wagons
Hi Gareth,
Not my period but lovely stuff nonetheless. Keep flying the wagoneers flag, I'll be looking out for further goodies.
John.
Not my period but lovely stuff nonetheless. Keep flying the wagoneers flag, I'll be looking out for further goodies.
John.
The second best priest
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
I spent a few minutes on Sunday weathering a couple wagons. I used Winsor & Newton's water mixable oil paints. It's a very strange concept, and I have no idea how they work, but I like them. There's a really long working time, but they still clean up with water, rather than turpentine.
Last edited by garethashenden on Tue Oct 17, 2017 4:29 am, edited 1 time in total.
-
- Posts: 403
- Joined: Tue Aug 11, 2009 8:42 pm
Re: Edwardian Wagons
Hi Gareth,
I'd love to see some close ups of your weathering. I'm always interested in different methods. One is never too old to learn new tricks, as my old dog says.
John.
I'd love to see some close ups of your weathering. I'm always interested in different methods. One is never too old to learn new tricks, as my old dog says.
John.
The second best priest
-
- Posts: 406
- Joined: Tue Apr 07, 2015 9:41 pm
Re: Edwardian Wagons
Here's a close up.
The wagons have had a coat of matt varnish. I mixed burnt umber with white and almost drybrushed it on. Thin it slightly with water if needed. On the LB&SCR wagon I put far too much on, so I took a damp paper towel and wiped it off with vertical strokes. The PO wagon had quite a bit of plain white put on as well as the brown. That's not the best explanation. When I do another one I'll try to take notes.
The wagons have had a coat of matt varnish. I mixed burnt umber with white and almost drybrushed it on. Thin it slightly with water if needed. On the LB&SCR wagon I put far too much on, so I took a damp paper towel and wiped it off with vertical strokes. The PO wagon had quite a bit of plain white put on as well as the brown. That's not the best explanation. When I do another one I'll try to take notes.
Last edited by garethashenden on Tue Oct 17, 2017 4:30 am, edited 1 time in total.
-
- Posts: 403
- Joined: Tue Aug 11, 2009 8:42 pm
Re: Edwardian Wagons
Thanks for posting those Gareth, very nice too. Burnt Umber is such a useful colour in weathering wagons of all periods.
The second best priest
Who is online
Users browsing this forum: ClaudeBot and 0 guests