Re: Tim V's workbench - latest shenanigans
-
- Posts: 641
- Joined: Mon Jun 07, 2010 2:34 pm
Re: Tim V's workbench - latest shenanigans
I realise the horse is not up to normal standards of P4 modelling, but as a simple mechanism there might be something to use! https://frugalfun4boys.com/paper-horse-that-walks/?jwsource=cl (scroll down to get the video) but more seriously there is a mechanism that might be perhaps scaled and motorised https://www.youtube.com/watch?v=MeJ_NUrB30U&t=4s
Connah's Quay Workshop threads: viewforum.php?f=125
-
- Posts: 912
- Joined: Sun Feb 01, 2009 10:16 pm
Re: Tim V's workbench - latest shenanigans
crikey! good luck with that one Tim!
Steve
Steve
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Tim V's workbench - latest shenanigans
Horse droppings might make luxuriant grass, but also it would be walked on by the horses. It would be a well trodden path.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 364
- Joined: Sun May 05, 2013 5:23 pm
Re: Tim V's workbench - latest shenanigans
I went to Expong around 10 or 12 years ago and they had a shoebox challenge, ie. Build a layout in a shoebox, one of the entries was a Manx horse drawn tram, the horse was held in place by the reigns and the legs were worked by rods connected to the leading crank axle, the rear axle was the driven one.
Phil
Phil
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Tim V's workbench - latest shenanigans
Phil O wrote:I went to Expong around 10 or 12 years ago and they had a shoebox challenge, ie. Build a layout in a shoebox, one of the entries was a Manx horse drawn tram, the horse was held in place by the reigns and the legs were worked by rods connected to the leading crank axle, the rear axle was the driven one.
Phil
I have seen that one, but I thought the movements a bit crude.
The one I liked was IJsselstein - a forced perspective model that originally featured a working horse, but by the time I saw it at Warley, the horse was out of commission. I did have a good look at the horse though.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 641
- Joined: Mon Jun 07, 2010 2:34 pm
Re: Tim V's workbench - latest shenanigans
The mechanism in the Ugeaers model I posted looks eminently scaleable and certainly no more complex than inside motion or Walschaerts gear. The model looks complex because the body of the horse is a wooden jigsaw. Rethink in terms of tubes of plastic and it becomes a lot simpler. I'm not sure how small you could easily go but I would think 7mm scale should be attaiunable. The walking man in an earlier video actually has feet that slide backwards and forwards without directly correlating to the forward motion but the horse movement is much better. There are plenty of tiny motors out there, and reins or other tack could supply power from wagons with pickups on their wheels, or carrying batteries.
Connah's Quay Workshop threads: viewforum.php?f=125
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Tim V's workbench - latest shenanigans
jon price wrote:The mechanism in the Ugeaers model I posted looks eminently scaleable and certainly no more complex than inside motion or Walschaerts gear. The model looks complex because the body of the horse is a wooden jigsaw. Rethink in terms of tubes of plastic and it becomes a lot simpler. I'm not sure how small you could easily go but I would think 7mm scale should be attaiunable. The walking man in an earlier video actually has feet that slide backwards and forwards without directly correlating to the forward motion but the horse movement is much better. There are plenty of tiny motors out there, and reins or other tack could supply power from wagons with pickups on their wheels, or carrying batteries.
Careful, you might get the commission
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Forum Team
- Posts: 3046
- Joined: Sun Jul 20, 2008 6:00 pm
Re: Tim V's workbench - latest shenanigans
steve howe wrote:Depending on how weedy the track between the plates would be, static grass might hide the slot? also eyelevel viewing would hide a multitude of sins!
Steve
If you're using real horsepower, then surely the propulsion unit would make short work of any weeds and long grass...
Cheers
Paul
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk
www.5522models.co.uk
-
- Posts: 964
- Joined: Mon Sep 14, 2009 6:09 pm
Re: Tim V's workbench - latest shenanigans
Part of the joy of our hobby is the variety of skills we require/achieve.
Now add to that list a knowledge of the dietary requirements of a plastic horse
Now add to that list a knowledge of the dietary requirements of a plastic horse
-
- Posts: 364
- Joined: Sun May 05, 2013 5:23 pm
Re: Tim V's workbench - latest shenanigans
[quote="Paul Townsend"]Part of the joy of our hobby is the variety of skills we require/achieve.
Now add to that list a knowledge of the dietary requirements of a plastic horse [/quote ]
Does that also require a man with a shovel and bucket, I suppose it will remain to be seen if it's good for the roses.
Now add to that list a knowledge of the dietary requirements of a plastic horse [/quote ]
Does that also require a man with a shovel and bucket, I suppose it will remain to be seen if it's good for the roses.
-
- Forum Team
- Posts: 3046
- Joined: Sun Jul 20, 2008 6:00 pm
Re: Tim V's workbench - latest shenanigans
Phil O wrote:Does that also require a man with a shovel and bucket, I suppose it will remain to be seen if it's good for the roses.
Forgive me if you've seen (or smelt) this one before...
https://www.rmweb.co.uk/community/index.php?/blogs/entry/24929-a-pictorial-record-of-horse-manure/
Cheers
Paul
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk
www.5522models.co.uk
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Tim V's workbench - latest shenanigans
While amusing (in a sort of way), the tramway is heavily trafficked, and droppings would quickly get squashed by the next horse along.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 861
- Joined: Thu Mar 20, 2014 12:19 pm
Re: Tim V's workbench - latest shenanigans
Paul Willis wrote:If you're using real horsepower, then surely the propulsion unit would make short work of any weeds and long grass...
I doubt it would be permitted to graze and they do have to stop to do so, same as when they deposit at the other end. But as Tim says it is heavily trafficked, they would trample the grass down but in a surprisingly narrow strip. Horses will choose the most comfortable path underfoot if they have the opportunity so it may not be perfectly down the middle or straight.
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Tim V's workbench - latest shenanigans
For those who are interested (!) have a look at one of the last horse drawn trains on British Railways.
https://player.bfi.org.uk/free/film/wat ... 962-online
https://player.bfi.org.uk/free/film/wat ... 962-online
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 641
- Joined: Mon Jun 07, 2010 2:34 pm
Re: Tim V's workbench - latest shenanigans
Interesting wheels on the wagons.
Connah's Quay Workshop threads: viewforum.php?f=125
-
- Forum Team
- Posts: 3046
- Joined: Sun Jul 20, 2008 6:00 pm
Re: Tim V's workbench - latest shenanigans
Tim V wrote:For those who are interested (!) have a look at one of the last horse drawn trains on British Railways.
https://player.bfi.org.uk/free/film/wat ... 962-online
Have you noticed that at 0'53", there is a heck of a derailed wheel?
But the horses just keep pulling. If only my wagons were as resilient as that!
Cheers
Paul
Beware of Trains - occasional modelling in progress!
www.5522models.co.uk
www.5522models.co.uk
-
- Posts: 95
- Joined: Fri Jul 25, 2008 3:34 pm
Re: Tim V's workbench - latest shenanigans
Paul Willis wrote:Tim V wrote:For those who are interested (!) have a look at one of the last horse drawn trains on British Railways.
https://player.bfi.org.uk/free/film/wat ... 962-online
Have you noticed that at 0'53", there is a heck of a derailed wheel?
But the horses just keep pulling. If only my wagons were as resilient as that!
Cheers
Paul
And we mustn't forget the Fintona horse tram ( http://www.trolleybus.net/subhtml/picture9.htm) in County Tyrone, Northern Ireland. Until 1957 it linked the small town of Fintona with its junction. It was notable for its pioneering recognition of trans rights in rural Ireland (normally socially conservative, to put it mildly) in that down the years the various tram horses were always known as Dick, regardless of their gender at birth.
Tony
-
- Posts: 66
- Joined: Mon Jan 25, 2021 9:39 pm
Re: Tim V's workbench - latest shenanigans
Interesting braking system too (!) - possibly an interesting modelling challenge, including modelling them as working brakes...
Chas
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Tim V's workbench - latest shenanigans
Sprags - very common. Stopped the waggons over-running the horses.
It's the sheer effortlessness and rhythmic quaintness of the whole scene - these chaps have been doing this a long time.
It's the sheer effortlessness and rhythmic quaintness of the whole scene - these chaps have been doing this a long time.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 66
- Joined: Mon Jan 25, 2021 9:39 pm
Re: Tim V's workbench - latest shenanigans
Agreed, beautiful to watch; practice makes perfect...
Chas
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Tim V's workbench - latest shenanigans
I have realised my workbench thread needs an index! So Dingham couplings are dealt with on page 13.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Tim V's workbench - latest shenanigans
Wickham Trolley pictures:
You do not have the required permissions to view the files attached to this post.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 2870
- Joined: Tue Jul 29, 2008 4:40 pm
Re: Tim V's workbench - latest shenanigans
Some colour is going on the layout, ready for Railwells.
You do not have the required permissions to view the files attached to this post.
Tim V
(Not all railways in Somerset went to Dorset)
(Not all railways in Somerset went to Dorset)
-
- Posts: 1558
- Joined: Sun Sep 14, 2008 10:25 pm
Re: Tim V's workbench - latest shenanigans
Tim V wrote:Some colour is going on the layout, ready for Railwells.
P1010224.JPG
Look forward to seeing it Tim.
Ordsall Road (BR(E)), Forge Mill Sidings (BR(M)), Kirkcliffe Coking Plant (BR(E)), Swanage (BR (S)) and Heaby (LMS/MR). Acquired Thorneywood (GNR). Still trying to "Keep the Balance".
-
- Posts: 66
- Joined: Mon Jan 25, 2021 9:39 pm
Who is online
Users browsing this forum: No registered users and 2 guests