An auld project that has been reactivated.
The early Fruit Vans built by British Rail were based on an auld LMS Van design; Parkside have produced the kit for these beasties. The build is of three vans, including one oddball...
More soon with this project.
BR Fruit Vans
-
- Posts: 570
- Joined: Thu Nov 05, 2009 10:28 am
BR Fruit Vans
You do not have the required permissions to view the files attached to this post.
Unthinking respect for authority is the greatest
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
-
- Posts: 2190
- Joined: Wed Jul 30, 2008 5:56 pm
Re: BR Fruit Vans
Hi Iain
These kits have the wrong profile ends. The roof is more like a br standard van and not like an LMS van. A common trick is to use the ends from the ratio van in their place.
HTH
Jim
These kits have the wrong profile ends. The roof is more like a br standard van and not like an LMS van. A common trick is to use the ends from the ratio van in their place.
HTH
Jim
-
- Posts: 1983
- Joined: Wed Jun 23, 2010 1:04 pm
Re: BR Fruit Vans
And the Ratio roof as well, to match the ends. Geoff Kent, in "The 4mm Wagon" Vol 2, reprofiles the kit ends and sides, and uses the kit roof, flattened slightly; however, if you have a spare Ratio roof it produces a better result, I feel.
Regards
Noel
Noel
-
- Posts: 570
- Joined: Thu Nov 05, 2009 10:28 am
Re: BR Fruit Vans
Noel wrote: Geoff Kent, in "The 4mm Wagon" Vol 2, reprofiles the kit ends and sides, and uses the kit roof, flattened slightly; however, if you have a spare Ratio roof it produces a better result, I feel.
You've stolen my thunder here Noel as that is exactly the path I am following. Mind, that is the intention
This project got left aside because of this very issue. Using the Ratio ends is feasible but I felt that Professor Kent's way forward might alleviate things without mucking up Ratio kits when I began. Since then I have managed to get a goodly number of Ratio kits so, using the Cambrian kits as well might bring some other beasties to fruition. I need to cross reference the MRJ articles again.
I do aim to cross kit some Ventilated Vans by using the Parkside sides and Ratio ends but that is for another day
Slàinte
Unthinking respect for authority is the greatest
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
-
- Posts: 570
- Joined: Thu Nov 05, 2009 10:28 am
Re: BR Fruit Vans
An update on this project - sadly ill health and family bereavement have caused a general torpor for some time...
Two views showing the scratch built nature of this underframe. A veritable melánge of plastic, brass and castings.
More soon as this project gains momentum.
Two views showing the scratch built nature of this underframe. A veritable melánge of plastic, brass and castings.
More soon as this project gains momentum.
You do not have the required permissions to view the files attached to this post.
Unthinking respect for authority is the greatest
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
-
- Posts: 105
- Joined: Tue Feb 23, 2010 9:53 am
Re: BR Fruit Vans
Looking at the relationship between the spring/axle box unit and the bottom of the W iron I think something might have gone astray Iain. Do the W irons need a bit of packing?
Cheers
David
Cheers
David
Modelling Clackmannanshire Railways in 1975
-
- Posts: 570
- Joined: Thu Nov 05, 2009 10:28 am
Re: BR Fruit Vans
Probably, these pictures were taken post depressive episode.
I have learnt not to beat myself up over such things David.
The modelling helps cage the Black Dog; wee, occasional cock ups come with the territory.
Mind, the angle of the image doesn't help...
I have learnt not to beat myself up over such things David.
The modelling helps cage the Black Dog; wee, occasional cock ups come with the territory.
Mind, the angle of the image doesn't help...
Unthinking respect for authority is the greatest
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
-
- Posts: 2190
- Joined: Wed Jul 30, 2008 5:56 pm
Re: BR Fruit Vans
As long as the buffer height is ok most won’t notice. I guess the springs and axle boxes are separate Iain? It just looks like you’ve mounted the axleboxes a tad low as the top bit should overlap the springs. It’s no biggie.
-
- Posts: 570
- Joined: Thu Nov 05, 2009 10:28 am
Re: BR Fruit Vans
There is life at Padgate Works
Progress at last. Apologies for the image quality, the next ones will be better.
This project has dragged on a bit so the finish line beckons.
Progress at last. Apologies for the image quality, the next ones will be better.
This project has dragged on a bit so the finish line beckons.
You do not have the required permissions to view the files attached to this post.
Unthinking respect for authority is the greatest
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
enemy of truth....
Albert Einstein
Perfection is impossible.
But I may choose to serve perfection....
Robert Fripp
https://www.facebook.com/groups/PadgateWorks/
Who is online
Users browsing this forum: ClaudeBot and 0 guests