Search found 978 matches

by Knuckles
Sun May 19, 2019 10:41 pm
Forum: Exhibitions
Topic: Show attacked
Replies: 33
Views: 7408

Re: Show attacked

I gave a bit, quite picky where I donate to and I'm not one for advertising the fact either but this is an exception to me. £36k I doubt will cover all the loss, not really. Add up ALL the locomotives, especially 0 gauge and above, components, electrics, boards etc, decades of work.....it's an ocean...
by Knuckles
Sun May 12, 2019 9:40 am
Forum: Chassis and Suspensions
Topic: Chassis Speed Building - Records and Methods
Replies: 17
Views: 4216

Re: Chassis Speed Building - Records and Methods

I go for split axles with custom made frame spacers, Mashima motors and High Level gearboxes and use the Avonside Chassis Squared jig. I've no idea on the construction time spent but the 2 locos that I've nearly finished were started in 2007 and 2010 if that helps. None of this is any reflection on...
by Knuckles
Sun May 12, 2019 8:10 am
Forum: Guest Book
Topic: RE: Chassis Speed Building
Replies: 21
Views: 5736

Re: RE: Chassis Speed Building

I'll reply to my own thred when on PC. Jim, it isn't all about fun to some people, some of us need to get a bucket load done and need speed, plus if we can make life quicker and easier for people then some will appreciate that. I enjoy modelling but not always every possible task and the scope of so...
by Knuckles
Sat May 11, 2019 11:17 am
Forum: Chassis and Suspensions
Topic: Chassis Speed Building - Records and Methods
Replies: 17
Views: 4216

Re: Chassis Speed Building - Records and Methods

It would but I'm not ready to show them. 0-4-0 in this case but the 0-6-0's are not far behind. Whole point of the question is, to the written amount of completion above what are your experiences and timings building any chassis. Would just like a collective of average times and experiences with dif...
by Knuckles
Sat May 11, 2019 10:34 am
Forum: Chassis and Suspensions
Topic: Chassis Speed Building - Records and Methods
Replies: 17
Views: 4216

Chassis Speed Building - Records and Methods

What is the quickest you have built a working chassis minus coupling rods? To this level of completion, Gearbox built and in frames, brake pads but not rigging on, wheel quartering and pressing done, crankpins on, pickups built and on, added power and it runs acceptably with no oil and a wee bit of ...
by Knuckles
Wed May 08, 2019 3:40 pm
Forum: Layouts and Operations
Topic: Stour Valley Dream - progress on P4 layout
Replies: 53
Views: 14169

Re: Stour Valley Dream - progress on P4 layout

They look brilliant.

I love my Photon too. Brilliant bit of kit.

I can imagine those levers being ruddy fragile though. Get em glued in the box quick. :mrgreen:
by Knuckles
Sat May 04, 2019 12:12 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

Not a new product but I was asked for help in deciding what detail variations the various Furness & Cambrian engines had in relation to the different parts I have made, so to that end I created this PDF earlier. You'll have to look at the Shapeways website or the Photon Price list for pictures a...
by Knuckles
Fri May 03, 2019 9:03 am
Forum: Layouts and Operations
Topic: Stour Valley Dream - progress on P4 layout
Replies: 53
Views: 14169

Re: Stour Valley Dream - progress on P4 layout

I haven't said much as I got nothing other than 'firework reactions' to contribute but great to see sone greenery on it at last. Looking forward to the next YT update, asuming there will be one. :)
by Knuckles
Fri May 03, 2019 8:54 am
Forum: North Norfolk
Topic: North Elmham NNAG Layout
Replies: 15
Views: 5820

Re: North Elmham NNAG Layout

'Commit Modelling' - That's priceless! Will remember that one. Like it's a cultural crime. (is to some!)

Thanks for the funny feels. 8-)
by Knuckles
Mon Apr 08, 2019 7:45 pm
Forum: Exhibitions
Topic: 2019 S4 North
Replies: 37
Views: 11294

Re: 2019 S4 North

Had a good day. Saw some layouts I hadn't before and some I had. Spent a bit too. Was particularly impressed with Midland Sidings. Both times I stood there watching the operations it was flawless and earned my vote at the end. No stalls and prodding by Mr Hand, all slow, smooth starts and stops thro...
by Knuckles
Wed Mar 20, 2019 8:11 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

Quick follow up to that 3D printed coach side I did for Linny.

https://mobile.twitter.com/LinnysTrains ... 0102609922

Bottom needs smoothing as the layer lines show a bit, or a higher resolution print. Other than that, apart from door handle wars, I think it's pretty nice.
by Knuckles
Wed Mar 20, 2019 6:24 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

Jokes aside we are getting close to that. There are technologies that create 3D meshes out of 2D images, your PC likely has one if you have Windows 10 called 3D Builder although I haven't yet given it much investigation. There is 3D colour printing. Hinged parts all printed in one go, fully 'hingabl...
by Knuckles
Wed Mar 20, 2019 1:41 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

Just wimp out and go all out Teak. :D
by Knuckles
Tue Mar 19, 2019 5:17 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

True for Shapeways but when you have your own printers things can be finer in some areas. I agree with Jol's points about different methods, techniques, preferances etc. Is what I keep saying. Although I obviously advocate 3D printing it won't replace etching for some things due to etching being mor...
by Knuckles
Sun Mar 17, 2019 2:49 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

Good post, Knuckles. I have to say that it largely sums up my own modelling philosophy as well. DT Ta Moowch. ;) I don't like the effort involved in removing moulded details to replace them with more realistic items. That's why I have only one Ratio LNWR carriage in my stock. Painting and lining co...
by Knuckles
Thu Mar 14, 2019 11:15 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

Not everyone, no. Personally I rivet count details (have to when designing) but for what I physically model on the desk I'm selective with what I want to be exacting. I have no interest in 'Getting it all right' as I'd never achieve my goals because they are significantly bigger than a small or medi...
by Knuckles
Wed Mar 13, 2019 7:55 pm
Forum: Exhibitions
Topic: RAILEX 2019
Replies: 54
Views: 13500

Re: RAILEX 2019

DougN wrote:Just stop that... I am being surrounded by people moving to O gauge... :evil:

No move temptations please! ;)


Isn't Scale7 the usual temptation? :mrgreen:


Never been to a Railex, must change that.
by Knuckles
Wed Mar 13, 2019 7:12 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

Thanks, Alan. It might be better without those details but Linny designed it. I just printed it. :) EDIT: Just editing to add a thought based on what Bill said below, at least with my own designs I like to put most details on, even if in some areas they are a little thick due to tolerances or whatev...
by Knuckles
Wed Mar 13, 2019 6:58 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

by Knuckles
Tue Mar 12, 2019 5:13 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

Not the best picture as white is the very devil to get a good shot of but it's a LSWR Coach Side printed at 50 microns as a test for someone.

Based on this at least I'd think the whole thing would turn out nice.

Image
by Knuckles
Fri Mar 01, 2019 5:29 pm
Forum: Steam Locomotives
Topic: Crab Comet conversion
Replies: 291
Views: 75121

Re: Crab Comet conversion

Ignoring the fact it's 00 and the chipped paint. This post 1939 version of a Gordon I bashed up has its drain cocks scratch built from 0.45mm brass rod with little 0.7mm bits. Just a quick soldier bash. A bit rough around the edges but I'm happy with the result even a decade or so later. Maybe try s...
by Knuckles
Thu Feb 28, 2019 12:15 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

Furness D1 (minus cab) with a particular chimney and safety valve plonked on for effect. Chassis, smokebox door, buffers, backhead controls and some E1 splashers. These will be posted off soon! https://i.imgur.com/Oc1K4ft.jpg https://i.imgur.com/tr6cfVn.jpg https://i.imgur.com/MGqRBul.jpg https://i....
by Knuckles
Mon Feb 25, 2019 5:34 pm
Forum: New Products
Topic: SCC - Sparkshot Custom Creations
Replies: 301
Views: 89659

Re: SCC - Sparkshot Custom Creations

Furness K2 Freelance Variant V2, basically a different cab and splashers. First time ever printed it on the Photon and it turned out great. Uploaded pic's... https://i.imgur.com/rKgVtVw.jpg https://i.imgur.com/H5UpdWe.jpg https://i.imgur.com/0Jed0C5.jpg https://i.imgur.com/ylLj8jF.jpg https://i.imgu...
by Knuckles
Wed Feb 20, 2019 5:50 am
Forum: jon price
Topic: Connah's Quay: The Layout.
Replies: 17
Views: 6885

Re: Connah's Quay: The Layout.

Looks like the quey just off from Knapford Junction (fictional but mapped out.)

Go to advanced search