Search found 276 matches

by David Bigcheeseplant
Sun Nov 24, 2019 8:33 pm
Forum: Product Information
Topic: Internal Thrush Kit
Replies: 4
Views: 1297

Re: Internal Thrush Kit

Hi Gerry

no problem I can cut curtains if you need them they are from 0.5mm Rowmark with half cut lines to give some relief, I glue them to rear of the glazing with evostick.

David
by David Bigcheeseplant
Thu Nov 21, 2019 5:14 pm
Forum: Product Information
Topic: Internal Thrush Kit
Replies: 4
Views: 1297

Re: Internal Thrush Kit

I have now done a test build on my THRUSH autocoach everything sees to fit, laser cut curtains have been added as well as Cambridge Custom Transfers for the name and numbers. I need to add the missing parts to the underframe which I think I will have to do as an etch. next up will be the test build ...
by David Bigcheeseplant
Wed Oct 30, 2019 2:35 pm
Forum: Product Information
Topic: Ultrascale Bespoke tyres
Replies: 10
Views: 851

Re: Ultrascale Bespoke tyres

This is good news, I can print the inserts if people want the wheels although, new wheel production from another angle is being worked on!
by David Bigcheeseplant
Tue Oct 15, 2019 6:36 am
Forum: On My Workbench
Topic: Manning Wardle wheels
Replies: 34
Views: 7999

Re: Manning Wardle wheels

I am sure Modelu can you some centres off as I think they are in his range, although I have my own printer now but I don't know if Alan adjusted my design at all.

David
by David Bigcheeseplant
Sun Oct 06, 2019 7:27 am
Forum: Layouts and Operations
Topic: Aylesbury (Town)
Replies: 46
Views: 11693

Re: Aylesbury (Town)

It has been a while since an update on Aylesbury, although quite a bit of the trackwork is laid wired and with point motors working. Hopefully in the next few months the remaining track and platforms will installed.

David
by David Bigcheeseplant
Tue Sep 17, 2019 6:43 am
Forum: Exhibitions
Topic: Scaleforum 2019
Replies: 249
Views: 23981

Re: Scaleforum 2019

Has the stadium sorted out the lighting inside the hall?

David
by David Bigcheeseplant
Mon Sep 16, 2019 2:11 pm
Forum: Exhibitions
Topic: Scaleforum 2019 - the social side
Replies: 40
Views: 7896

Re: Scaleforum 2019 - the social side

No that was Turville and Hambleden a different place about twenty miles away.
by David Bigcheeseplant
Mon Sep 16, 2019 1:56 pm
Forum: Exhibitions
Topic: Scaleforum 2019 - the social side
Replies: 40
Views: 7896

Re: Scaleforum 2019 - the social side

There is no UBER in Aylesbury but taxis are cheep should cost around £5-6 to get back to Weston Turville, or £4 from anywhere in Aylesbury to anywhere in Aylesbury I tend to use Falcon 01296 580000. There are a few new places that have opened in Aylesbury a Japanese resultant called Miya, the Craft ...
by David Bigcheeseplant
Sun Sep 15, 2019 12:00 pm
Forum: Steam Locomotives
Topic: Any Wheel and size!
Replies: 79
Views: 11393

Re: Any Wheel and size!

Previously I have made the wheels a tight fit in the tyre with a bit of glue so they stay put. I have used Gibson tyres in the past but if I can get tyres CNC machined the I would design the tyre so that the centre has a more positive location. The fit I can get on an axle is similar to that of a Gi...
by David Bigcheeseplant
Sat Sep 14, 2019 6:56 pm
Forum: Steam Locomotives
Topic: Any Wheel and size!
Replies: 79
Views: 11393

Re: Any Wheel and size!

I can create any wheel if I know what diameter crank throw etc.
by David Bigcheeseplant
Mon Sep 09, 2019 6:33 am
Forum: Steam Locomotives
Topic: Any Wheel and size!
Replies: 79
Views: 11393

Re: Any Wheel and size!

9F print.jpg
9F print.jpg (43.27 KiB) Viewed 1153 times


I test printed some of the 9F wheels which look ok. plus Peckett and Southern E1

David
by David Bigcheeseplant
Sun Sep 08, 2019 6:31 pm
Forum: Exhibitions
Topic: Scaleforum 2019 - the social side
Replies: 40
Views: 7896

Re: Scaleforum 2019 - the social side

I will probably go for a curry and join you later.

The Hop Pole is well worth a visit ten real ales and the food is pretty good too. I will be there on the Friday night.
by David Bigcheeseplant
Wed Aug 14, 2019 1:25 pm
Forum: Product Information
Topic: Internal Thrush Kit
Replies: 4
Views: 1297

Re: Internal Thrush Kit

These are the 3D printed seats for WREN and the A43 trailers the handle on the corner has come out well.

David
by David Bigcheeseplant
Fri Aug 02, 2019 6:46 am
Forum: Product Information
Topic: Internal Thrush Kit
Replies: 4
Views: 1297

Internal Thrush Kit

I am working on a kit to produce the replacement seats and partitions to turn the Bachmann Hawksworth autotrailer to the named version THRUSH also there will be two other kits one to do WREN and the other to do the diagram A43 trailers. The seats will be 3D printed and the floor and partitions laser...
by David Bigcheeseplant
Fri May 24, 2019 7:57 am
Forum: Exhibitions
Topic: RAILEX 2019
Replies: 54
Views: 6876

Re: RAILEX 2019

Just a bump to say RAILEX is this weekend. Good quality layouts and probably one of the best shows for specialist traders too.

David
by David Bigcheeseplant
Wed May 22, 2019 5:37 pm
Forum: Exhibitions
Topic: RAILEX 2019
Replies: 54
Views: 6876

Re: RAILEX 2019

The bus timetable is now on the website www.railex.org.uk
by David Bigcheeseplant
Sun May 19, 2019 6:29 pm
Forum: Exhibitions
Topic: RAILEX 2019
Replies: 54
Views: 6876

Re: RAILEX 2019

We are just getting the bus owners to check the timetable then it will be uploaded, it is not just the new Chiltern timetable we had to check but who was playing in some football related thing that had an effect on the trains too.

David
by David Bigcheeseplant
Fri Apr 26, 2019 4:00 pm
Forum: Exhibitions
Topic: RAILEX 2019
Replies: 54
Views: 6876

Re: RAILEX 2019

Yep the travel on the vintage bus is free, although tickets and programmes can be purchased on the bus for entry to Railex cash only, you can also buy tickets and programmes at the stadium cash or card or advance tickets paypal or card on-line via our web page. hope this is clear.

David
by David Bigcheeseplant
Fri Apr 26, 2019 6:39 am
Forum: Exhibitions
Topic: RAILEX 2019
Replies: 54
Views: 6876

Re: RAILEX 2019

A month to go till RAILEX 2019 This year we are able to take card payments on the front desk but it is cash only on the free vintage bus which departs from Aylesbury railway station car park up to every half hour on Saturday and each hour on Sunday. You can also book advance tickets via our webpage ...
by David Bigcheeseplant
Sun Mar 10, 2019 5:30 pm
Forum: Exhibitions
Topic: RAILEX 2019
Replies: 54
Views: 6876

Re: RAILEX 2019

I have updated the first post to include all the layouts.

We should be able to take card payment on the reception desks this year but not on the free vintage bus which will be cash only.

David
by David Bigcheeseplant
Thu Jan 03, 2019 6:35 pm
Forum: Steam Locomotives
Topic: Any Wheel and size!
Replies: 79
Views: 11393

Re: Any Wheel and size!

A flared boss is very easy to do it is one of the parameters I can change see the two versions of the same wheel. Barcley wheels again no problem I simply change the variables in the spoke shape.


David
by David Bigcheeseplant
Thu Jan 03, 2019 7:39 am
Forum: Steam Locomotives
Topic: Any Wheel and size!
Replies: 79
Views: 11393

Re: Any Wheel and size!

That is really helpful, is Evening Star the only 9F with the weird second driver? The Centre driver is really different to the others, I can do the variants if people really wanted them! The wheel generator will get the wheels 98 percent there I may have to add things like fillets later but this is ...
by David Bigcheeseplant
Wed Jan 02, 2019 9:37 pm
Forum: Steam Locomotives
Topic: Any Wheel and size!
Replies: 79
Views: 11393

Re: Any Wheel and size!

just tell me all the info with maybe a picture and I will see what I can do.
by David Bigcheeseplant
Wed Jan 02, 2019 9:18 pm
Forum: Steam Locomotives
Topic: Any Wheel and size!
Replies: 79
Views: 11393

Re: Any Wheel and size!

On some wheels yes others no, I can just add in what angle bevel I need and it is there.

The 9F wheels have a bevel.

David
by David Bigcheeseplant
Wed Jan 02, 2019 8:44 pm
Forum: Steam Locomotives
Topic: Any Wheel and size!
Replies: 79
Views: 11393

Re: Any Wheel and size!

I have added more variables into the wheel generator, I can now add the flare of the spokes into the hub and also the shape of the spokes are also adjustable and are oval or egg shaped in section.

Go to advanced search