Search found 394 matches

by nigelcliffe
Mon Jun 10, 2019 7:11 am
Forum: Railmotors, Railcars and Multiple Units
Topic: Why the big windows?
Replies: 23
Views: 2224

Re: Why the big windows?

philip-griffiths wrote:The one scene looked like Blencathra.


Nah, its the Gog Magog near Cambridge (which is slightly off-route for Norwich). If you get the camera angle right, it can look a bit like the lake district :-)
by nigelcliffe
Tue May 21, 2019 8:52 pm
Forum: Steam Locomotives
Topic: Brassmasters J94
Replies: 28
Views: 1724

Re: Brassmasters J94

Very Nice Jim, :thumb If it comes with the full motion, even if it does not operate that's great. I have just been making dummy ones, the main part you notice below the boiler is the large balance weight which moves according to the setting of the gears for forward and reverse motion. In DCC and us...
by nigelcliffe
Thu May 09, 2019 1:14 pm
Forum: DCC
Topic: DCC Bus Wire
Replies: 10
Views: 1219

Re: DCC Bus Wire

One small detail on the MERG DCO - if you have a RailCom based command station, you need the alternative firmware in the DCO's processor, otherwise it doesn't work with RailCom being present. You can turn off RailCom in the command station, but then loose the features it offers. With the alternative...
by nigelcliffe
Fri Apr 12, 2019 8:14 am
Forum: Wagons
Topic: problems making wagon brakes
Replies: 8
Views: 870

Re: problems making wagon brakes

I wouldn't rule out 3D printing. I've been experimenting with iMaterialise.com, and their stainless steel option. [...] One of my friends has produced connecting rods and other chassis parts for a working 1:160 scale narrow gauge locomotive through this method. Interesting! Are there any photos in ...
by nigelcliffe
Tue Apr 09, 2019 7:36 am
Forum: Wagons
Topic: problems making wagon brakes
Replies: 8
Views: 870

Re: problems making wagon brakes

I wouldn't rule out 3D printing. I've been experimenting with iMaterialise.com, and their stainless steel option. Main cross-section limit is about 0.5mm by 0.5mm (can be less in some cases). Detail is much finer than that. Provided you can keep the total volume of component and supporting/surroundi...
by nigelcliffe
Mon Apr 08, 2019 11:06 am
Forum: Exhibitions
Topic: 2019 S4 North
Replies: 37
Views: 5200

Re: 2019 S4 North

Is Terry studying the results on his pools coupon ?
..... Rolvenden 3, United Mills 3


- Nigel
by nigelcliffe
Thu Feb 07, 2019 3:05 pm
Forum: Other Workshop Practice
Topic: Mini Cutting Broaches
Replies: 5
Views: 1484

Re: Mini Cutting Broaches

if Cousin's won't play ball, then their competitors Cooksongold may have something suitable.
by nigelcliffe
Mon Feb 04, 2019 10:55 pm
Forum: Guest Book
Topic: flywheels or DCC - Oops
Replies: 6
Views: 547

Re: flywheels or DCC - Oops

I didn't intend "practical patch" to be a negative connotation. Apparently they make a huge helpful difference for sound decoders. (which I don't have). Personally I would opt for small keep alives rather than large. I hate the idea of a heavy fast moving train to be disconnected from it'...
by nigelcliffe
Mon Feb 04, 2019 6:15 pm
Forum: Guest Book
Topic: flywheels or DCC - Oops
Replies: 6
Views: 547

Re: flywheels or DCC - Oops

With DCC there is another choice: use the space for a mechanical flywheel or use the space for an electronic flywheel (aka "stay alive module"). The electronic version can work when the motor is stationary (see Zimo's very clever "nudge the loco along when it looses power on stopping...
by nigelcliffe
Mon Feb 04, 2019 10:14 am
Forum: Guest Book
Topic: flywheels or DCC - Oops
Replies: 6
Views: 547

Re: flywheels or DCC - Oops

Just wanted to make a small clarification. It's bemf that controls motors well without flywheels, not DCC per se. You can have bemf on DC controllers and DCC decoders without bemf - although nowadays its almost standard on newer DCC decoders. However if you want closed loop motor absolute speed and...
by nigelcliffe
Mon Dec 31, 2018 2:56 pm
Forum: Other Workshop Practice
Topic: best insulation material in loco?
Replies: 4
Views: 805

Re: best insulation material in loco?

I'm forced to put a DCC chip next to a tiny Mashima motor because of the small size of a loco. Any suggestions for an effective insulating material that will be no more than a millimeter or so thick to separate them and keep the chip as cool as possible? I use Tamiya masking tape. If there is space...
by nigelcliffe
Sat Dec 22, 2018 2:28 pm
Forum: Steam Locomotives
Topic: Any Wheel and size!
Replies: 62
Views: 7283

Re: Any Wheel and size!

I think form-tools are over-stated in their usefulness. Unless doing an awful lot of rims, and owning a very rigid lathe, they're not going to give you any benefit over a conventional tool held at the appropriate angles. The coning angle can be set on a top-slide on all but the most basic of lathes....
by nigelcliffe
Sat Dec 22, 2018 10:39 am
Forum: Steam Locomotives
Topic: Any Wheel and size!
Replies: 62
Views: 7283

Re: Any Wheel and size!

The tyres on an AG wheels are indeed an interference fit from the back, just how much of an interference fit has changed over the years. In the good old days there was a fair bit of criticism about tyres falling off ie being a loose fit. Colin Seymour has done something about this and the fit is no...
by nigelcliffe
Fri Dec 07, 2018 9:30 pm
Forum: Steam Locomotives
Topic: DJ Models Austerity
Replies: 15
Views: 2297

Re: DJ Models Austerity

I've not done anything with the loco wheels but note that DJ suggest feedback controllers such as a Pentroller will damage the loco. I'm not changing all my controllers for one engine. Is there a fix? Whilst the motor would probably be seen off by a crude low-frequency feedback device (eg. Gaugemas...
by nigelcliffe
Fri Nov 30, 2018 7:40 pm
Forum: Track and Turnouts
Topic: Colouring Sleepers
Replies: 24
Views: 2895

Re: Colouring Sleepers

My friend in the borders, building a large EM layout using plastic chairs, is using Walnut sleepers. He tried a lot of different types before making the decision. Bought in long lengths of appropriate cross-section from model boat building suppliers, which he chops on a little chopping tool to lengt...
by nigelcliffe
Sun Nov 25, 2018 10:48 pm
Forum: Steam Locomotives
Topic: Bachmann D11/2 conversion
Replies: 16
Views: 2003

Re: Bachmann D11/2 conversion

My expectation would be that if the coupling rods are a decent fit on the crankpins, and the wheels are not rattling in their bearings front-aft, then the coupling rods alone will be quieter and smoother. With both gears and rods you're fighting a loosing battle against two lots of running clearance...
by nigelcliffe
Tue Oct 30, 2018 6:54 pm
Forum: Signals and Control Systems
Topic: Mk II Lever Frame - Rolling the quadrant plate
Replies: 5
Views: 764

Re: Mk II Lever Frame - Rolling the quadrant plate

Doesn't it come out 2.33mm under size by using a Railway Modeller ?

- Nigel
by nigelcliffe
Thu Oct 25, 2018 10:14 am
Forum: Track and Turnouts
Topic: Radius Testing - Practical Experiments.
Replies: 60
Views: 5853

Re: Radius Testing - Practical Experiments.

DGs work (I know someone with a large EM layout under construction using them), and they've a long history in 2mm scale where the first versions were designed. But they're not a magic solution to everything, there are constraints in their width (even if a non-standard loop shape is formed). This isn...
by nigelcliffe
Wed Sep 19, 2018 5:26 pm
Forum: Couplings
Topic: Auto- Couplings , what choices - decisions
Replies: 36
Views: 4089

Re: Auto- Couplings , what choices - decisions

Another suggestion is "DG", very popular in 2mm circles ("D" and "G" being 2mm modellers). Its available in a variety of sizes, and I know a large EM layout being built using them. On paper, meets the requirements specified.


- Nigel
by nigelcliffe
Fri Sep 14, 2018 8:21 am
Forum: Electrics
Topic: which controller for a test track?
Replies: 16
Views: 2345

Re: which controller for a test track?

I use a smooth DC controller based on a LM317 chip http://www.ti.com/product/LM317?utm_source=google&utm_medium=cpc&utm_term=lm317&utm_campaign=app_ldo_ww_p_e_ldo&utm_content=e910e69e-fea0-49b2-8b1e-6312360a3ce5&gclid=EAIaIQobChMI0Nqzqfi33QIVzpPtCh2CPgXGEAAYASAAEgLv-fD_BwE# circ...
by nigelcliffe
Tue Sep 11, 2018 5:56 pm
Forum: Electrics
Topic: which controller for a test track?
Replies: 16
Views: 2345

Re: which controller for a test track?

Off the shelf, I'd probably get a Gaugemaster panel unit for what you propose, then add a direction switch down-stream to solve the meter issue. The one I used to really like isn't available anymore, it had two knobs, one normal "speed" knob, and another which altered the overall voltage r...
by nigelcliffe
Thu Sep 06, 2018 8:15 pm
Forum: Track and Turnouts
Topic: Ballasting ply sleepered track
Replies: 28
Views: 3479

Re: Ballasting ply sleepered track

Your friend working in EM is then using the vees (pre-positioned) to work out from when laying the rest of the track as the templot print is by then under the pollyfilla ballast? Or does he trace another templot print onto the tops of the sleepers? There are a few things done to ease the rail posit...
by nigelcliffe
Tue Sep 04, 2018 5:28 pm
Forum: Track and Turnouts
Topic: Ballasting ply sleepered track
Replies: 28
Views: 3479

Re: Ballasting ply sleepered track

A friend of mine, working in EM, is building track this way, his prototype has mostly ash ballast: Paper Templot output glued down. Died Walnut sleepers (decided these looked better than ply) glued to paper. Ballast by trowelling on Polycell light weight filler (comes in medium tubs from DIY sheds, ...
by nigelcliffe
Mon Aug 13, 2018 6:41 pm
Forum: Exhibitions
Topic: Scalefour Southwest (Railwells) 2018
Replies: 15
Views: 2475

Re: Scalefour Southwest (Railwells) 2018

I too had a good day+quarter, two nights away and a long drive from the frozen north. Mostly to see the very large 2mm crowd who were planning to attend. Was next to Roger Orpwood and his microscopic T scale demonstration model which initially he would not divulge its secrets of how it worked. Liste...
by nigelcliffe
Sun Aug 05, 2018 5:23 pm
Forum: Steam Locomotives
Topic: DJ Models Austerity
Replies: 15
Views: 2297

Re: DJ Models Austerity

I've had one apart to discuss EM conversion with a friend. We're going to build the RT Models chassis, and a High Level Gearbox (which will thread things up the firebox into the boiler). Will probably compensate it (springing would be possible). Should still be room for a speaker for sound if wanted...

Go to advanced search